Date: Fri, 8 Oct 2010 19:00:36 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-7@freebsd.org Subject: svn commit: r213598 - stable/7/sys/dev/mii Message-ID: <201010081900.o98J0aaq004252@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: yongari Date: Fri Oct 8 19:00:36 2010 New Revision: 213598 URL: http://svn.freebsd.org/changeset/base/213598 Log: MFC r212306-212307,212342: r212306: Remove trailing CR at EOL. r212307: Consistently use tab characters instead of tab + space characters. No functional changes. r212342: Correct definition of T2 mode bit of MRBE Message Page 5 Next Page Control Register. Modified: stable/7/sys/dev/mii/brgphy.c stable/7/sys/dev/mii/brgphyreg.h Directory Properties: stable/7/sys/ (props changed) stable/7/sys/cddl/contrib/opensolaris/ (props changed) stable/7/sys/contrib/dev/acpica/ (props changed) stable/7/sys/contrib/pf/ (props changed) Modified: stable/7/sys/dev/mii/brgphy.c ============================================================================== --- stable/7/sys/dev/mii/brgphy.c Fri Oct 8 18:58:01 2010 (r213597) +++ stable/7/sys/dev/mii/brgphy.c Fri Oct 8 19:00:36 2010 (r213598) @@ -140,7 +140,7 @@ static const struct mii_phydesc brgphys[ MII_PHY_DESC(xxBROADCOM_ALT1, BCM5784), MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709C), MII_PHY_DESC(xxBROADCOM_ALT1, BCM5761), - MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709S), + MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709S), MII_PHY_DESC(BROADCOM2, BCM5906), MII_PHY_END }; @@ -242,11 +242,12 @@ brgphy_attach(device_t dev) bsc->serdes_flags |= BRGPHY_5708S; sc->mii_flags |= MIIF_HAVEFIBER; break; - case MII_MODEL_xxBROADCOM_ALT1_BCM5709S: - bsc->serdes_flags |= BRGPHY_5709S; - sc->mii_flags |= MIIF_HAVEFIBER; - break; - } break; + case MII_MODEL_xxBROADCOM_ALT1_BCM5709S: + bsc->serdes_flags |= BRGPHY_5709S; + sc->mii_flags |= MIIF_HAVEFIBER; + break; + } + break; default: device_printf(dev, "Unrecognized OUI for PHY!\n"); } @@ -625,7 +626,7 @@ brgphy_status(struct mii_softc *sc) PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0); xstat = PHY_READ(sc, BRGPHY_5708S_PG0_1000X_STAT1); - /* Check for MRBE auto-negotiated speed results. */ + /* Check for MRBE auto-negotiated speed results. */ switch (xstat & BRGPHY_5708S_PG0_1000X_STAT1_SPEED_MASK) { case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_10: mii->mii_media_active |= IFM_10_FL; break; @@ -637,39 +638,39 @@ brgphy_status(struct mii_softc *sc) mii->mii_media_active |= IFM_2500_SX; break; } - /* Check for MRBE auto-negotiated duplex results. */ + /* Check for MRBE auto-negotiated duplex results. */ if (xstat & BRGPHY_5708S_PG0_1000X_STAT1_FDX) mii->mii_media_active |= IFM_FDX; else mii->mii_media_active |= IFM_HDX; - } else if (bsc->serdes_flags & BRGPHY_5709S) { + } else if (bsc->serdes_flags & BRGPHY_5709S) { - /* Select GP Status Block of the AN MMD, get autoneg results. */ - PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_GP_STATUS); + /* Select GP Status Block of the AN MMD, get autoneg results. */ + PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_GP_STATUS); xstat = PHY_READ(sc, BRGPHY_GP_STATUS_TOP_ANEG_STATUS); - /* Restore IEEE0 block (assumed in all brgphy(4) code). */ - PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0); + /* Restore IEEE0 block (assumed in all brgphy(4) code). */ + PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0); - /* Check for MRBE auto-negotiated speed results. */ - switch (xstat & BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK) { - case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10: - mii->mii_media_active |= IFM_10_FL; break; - case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100: - mii->mii_media_active |= IFM_100_FX; break; - case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G: - mii->mii_media_active |= IFM_1000_SX; break; - case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G: - mii->mii_media_active |= IFM_2500_SX; break; + /* Check for MRBE auto-negotiated speed results. */ + switch (xstat & BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK) { + case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10: + mii->mii_media_active |= IFM_10_FL; break; + case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100: + mii->mii_media_active |= IFM_100_FX; break; + case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G: + mii->mii_media_active |= IFM_1000_SX; break; + case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G: + mii->mii_media_active |= IFM_2500_SX; break; } - /* Check for MRBE auto-negotiated duplex results. */ + /* Check for MRBE auto-negotiated duplex results. */ if (xstat & BRGPHY_GP_STATUS_TOP_ANEG_FDX) mii->mii_media_active |= IFM_FDX; else mii->mii_media_active |= IFM_HDX; - } + } } @@ -1115,50 +1116,50 @@ brgphy_reset(struct mii_softc *sc) } else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709 && (bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) { - /* Select the SerDes Digital block of the AN MMD. */ - PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_SERDES_DIG); + /* Select the SerDes Digital block of the AN MMD. */ + PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_SERDES_DIG); val = PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1); val &= ~BRGPHY_SD_DIG_1000X_CTL1_AUTODET; val |= BRGPHY_SD_DIG_1000X_CTL1_FIBER; PHY_WRITE(sc, BRGPHY_SERDES_DIG_1000X_CTL1, val); - /* Select the Over 1G block of the AN MMD. */ + /* Select the Over 1G block of the AN MMD. */ PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_OVER_1G); - /* Enable autoneg "Next Page" to advertise 2.5G support. */ - val = PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1); + /* Enable autoneg "Next Page" to advertise 2.5G support. */ + val = PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1); if (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG) val |= BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G; else val &= ~BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G; PHY_WRITE(sc, BRGPHY_OVER_1G_UNFORMAT_PG1, val); - /* Select the Multi-Rate Backplane Ethernet block of the AN MMD. */ + /* Select the Multi-Rate Backplane Ethernet block of the AN MMD. */ PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_MRBE); - /* Enable MRBE speed autoneg. */ - val = PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP); + /* Enable MRBE speed autoneg. */ + val = PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP); val |= BRGPHY_MRBE_MSG_PG5_NP_MBRE | BRGPHY_MRBE_MSG_PG5_NP_T2; PHY_WRITE(sc, BRGPHY_MRBE_MSG_PG5_NP, val); - /* Select the Clause 73 User B0 block of the AN MMD. */ - PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_CL73_USER_B0); + /* Select the Clause 73 User B0 block of the AN MMD. */ + PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_CL73_USER_B0); - /* Enable MRBE speed autoneg. */ + /* Enable MRBE speed autoneg. */ PHY_WRITE(sc, BRGPHY_CL73_USER_B0_MBRE_CTL1, BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP | BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR | BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG); - /* Restore IEEE0 block (assumed in all brgphy(4) code). */ - PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0); + /* Restore IEEE0 block (assumed in all brgphy(4) code). */ + PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0); } else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709) { if ((BCE_CHIP_REV(bce_sc) == BCE_CHIP_REV_Ax) || (BCE_CHIP_REV(bce_sc) == BCE_CHIP_REV_Bx)) brgphy_fixup_disable_early_dac(sc); - + brgphy_jumbo_settings(sc, ifp->if_mtu); brgphy_ethernet_wirespeed(sc); } else { Modified: stable/7/sys/dev/mii/brgphyreg.h ============================================================================== --- stable/7/sys/dev/mii/brgphyreg.h Fri Oct 8 18:58:01 2010 (r213597) +++ stable/7/sys/dev/mii/brgphyreg.h Fri Oct 8 19:00:36 2010 (r213598) @@ -39,21 +39,21 @@ * Broadcom BCM5400 registers */ -#define BRGPHY_MII_BMCR 0x00 -#define BRGPHY_BMCR_RESET 0x8000 -#define BRGPHY_BMCR_LOOP 0x4000 -#define BRGPHY_BMCR_SPD0 0x2000 /* Speed select, lower bit */ -#define BRGPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */ -#define BRGPHY_BMCR_PDOWN 0x0800 /* Power down */ -#define BRGPHY_BMCR_ISO 0x0400 /* Isolate */ +#define BRGPHY_MII_BMCR 0x00 +#define BRGPHY_BMCR_RESET 0x8000 +#define BRGPHY_BMCR_LOOP 0x4000 +#define BRGPHY_BMCR_SPD0 0x2000 /* Speed select, lower bit */ +#define BRGPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */ +#define BRGPHY_BMCR_PDOWN 0x0800 /* Power down */ +#define BRGPHY_BMCR_ISO 0x0400 /* Isolate */ #define BRGPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */ -#define BRGPHY_BMCR_FDX 0x0100 /* Duplex mode */ -#define BRGPHY_BMCR_CTEST 0x0080 /* Collision test enable */ -#define BRGPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */ - -#define BRGPHY_S1000 BRGPHY_BMCR_SPD1 /* 1000mbps */ -#define BRGPHY_S100 BRGPHY_BMCR_SPD0 /* 100mpbs */ -#define BRGPHY_S10 0 /* 10mbps */ +#define BRGPHY_BMCR_FDX 0x0100 /* Duplex mode */ +#define BRGPHY_BMCR_CTEST 0x0080 /* Collision test enable */ +#define BRGPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */ + +#define BRGPHY_S1000 BRGPHY_BMCR_SPD1 /* 1000mbps */ +#define BRGPHY_S100 BRGPHY_BMCR_SPD0 /* 100mpbs */ +#define BRGPHY_S10 0 /* 10mbps */ #define BRGPHY_MII_BMSR 0x01 #define BRGPHY_BMSR_EXTSTS 0x0100 /* Extended status present */ @@ -262,153 +262,153 @@ #define BRGPHY_IMR_LNK_CHG 0x0002 /* Link status change */ #define BRGPHY_IMR_CRCERR 0x0001 /* CRC error */ -/*******************************************************/ -/* Begin: Shared SerDes PHY register definitions */ -/*******************************************************/ - -/* SerDes autoneg is different from copper */ -#define BRGPHY_SERDES_ANAR 0x04 -#define BRGPHY_SERDES_ANAR_FDX 0x0020 -#define BRGPHY_SERDES_ANAR_HDX 0x0040 -#define BRGPHY_SERDES_ANAR_NO_PAUSE (0x0 << 7) -#define BRGPHY_SERDES_ANAR_SYM_PAUSE (0x1 << 7) -#define BRGPHY_SERDES_ANAR_ASYM_PAUSE (0x2 << 7) -#define BRGPHY_SERDES_ANAR_BOTH_PAUSE (0x3 << 7) - -#define BRGPHY_SERDES_ANLPAR 0x05 -#define BRGPHY_SERDES_ANLPAR_FDX 0x0020 -#define BRGPHY_SERDES_ANLPAR_HDX 0x0040 -#define BRGPHY_SERDES_ANLPAR_NO_PAUSE (0x0 << 7) -#define BRGPHY_SERDES_ANLPAR_SYM_PAUSE (0x1 << 7) -#define BRGPHY_SERDES_ANLPAR_ASYM_PAUSE (0x2 << 7) -#define BRGPHY_SERDES_ANLPAR_BOTH_PAUSE (0x3 << 7) - -/*******************************************************/ -/* End: Shared SerDes PHY register definitions */ -/*******************************************************/ - -/*******************************************************/ -/* Begin: PHY register values for the 5706 PHY */ -/*******************************************************/ - -/* - * Shadow register 0x1C, bit 15 is write enable, - * bits 14-10 select function (0x00 to 0x1F). - */ -#define BRGPHY_MII_SHADOW_1C 0x1C -#define BRGPHY_SHADOW_1C_WRITE_EN 0x8000 -#define BRGPHY_SHADOW_1C_SELECT_MASK 0x7C00 - +/*******************************************************/ +/* Begin: Shared SerDes PHY register definitions */ +/*******************************************************/ + +/* SerDes autoneg is different from copper */ +#define BRGPHY_SERDES_ANAR 0x04 +#define BRGPHY_SERDES_ANAR_FDX 0x0020 +#define BRGPHY_SERDES_ANAR_HDX 0x0040 +#define BRGPHY_SERDES_ANAR_NO_PAUSE (0x0 << 7) +#define BRGPHY_SERDES_ANAR_SYM_PAUSE (0x1 << 7) +#define BRGPHY_SERDES_ANAR_ASYM_PAUSE (0x2 << 7) +#define BRGPHY_SERDES_ANAR_BOTH_PAUSE (0x3 << 7) + +#define BRGPHY_SERDES_ANLPAR 0x05 +#define BRGPHY_SERDES_ANLPAR_FDX 0x0020 +#define BRGPHY_SERDES_ANLPAR_HDX 0x0040 +#define BRGPHY_SERDES_ANLPAR_NO_PAUSE (0x0 << 7) +#define BRGPHY_SERDES_ANLPAR_SYM_PAUSE (0x1 << 7) +#define BRGPHY_SERDES_ANLPAR_ASYM_PAUSE (0x2 << 7) +#define BRGPHY_SERDES_ANLPAR_BOTH_PAUSE (0x3 << 7) + +/*******************************************************/ +/* End: Shared SerDes PHY register definitions */ +/*******************************************************/ + +/*******************************************************/ +/* Begin: PHY register values for the 5706 PHY */ +/*******************************************************/ + +/* + * Shadow register 0x1C, bit 15 is write enable, + * bits 14-10 select function (0x00 to 0x1F). + */ +#define BRGPHY_MII_SHADOW_1C 0x1C +#define BRGPHY_SHADOW_1C_WRITE_EN 0x8000 +#define BRGPHY_SHADOW_1C_SELECT_MASK 0x7C00 + /* Shadow 0x1C Mode Control Register (select value 0x1F) */ -#define BRGPHY_SHADOW_1C_MODE_CTRL (0x1F << 10) +#define BRGPHY_SHADOW_1C_MODE_CTRL (0x1F << 10) /* When set, Regs 0-0x0F are 1000X, else 1000T */ -#define BRGPHY_SHADOW_1C_ENA_1000X 0x0001 +#define BRGPHY_SHADOW_1C_ENA_1000X 0x0001 + +#define BRGPHY_MII_TEST1 0x1E +#define BRGPHY_TEST1_TRIM_EN 0x0010 +#define BRGPHY_TEST1_CRC_EN 0x8000 + +#define BRGPHY_MII_TEST2 0x1F + +/*******************************************************/ +/* End: PHY register values for the 5706 PHY */ +/*******************************************************/ + +/*******************************************************/ +/* Begin: PHY register values for the 5708S SerDes PHY */ +/*******************************************************/ + +/* Autoneg Next Page Transmit 1 Regiser */ +#define BRGPHY_5708S_ANEG_NXT_PG_XMIT1 0x0B +#define BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G 0x0001 + +/* Use the BLOCK_ADDR register to select the page for registers 0x10 to 0x1E */ +#define BRGPHY_5708S_BLOCK_ADDR 0x1f +#define BRGPHY_5708S_DIG_PG0 0x0000 +#define BRGPHY_5708S_DIG3_PG2 0x0002 +#define BRGPHY_5708S_TX_MISC_PG5 0x0005 + +/* 5708S SerDes "Digital" Registers (page 0) */ +#define BRGPHY_5708S_PG0_1000X_CTL1 0x10 +#define BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN 0x0010 +#define BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE 0x0001 + +#define BRGPHY_5708S_PG0_1000X_STAT1 0x14 +#define BRGPHY_5708S_PG0_1000X_STAT1_LINK 0x0002 +#define BRGPHY_5708S_PG0_1000X_STAT1_FDX 0x0004 +#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_MASK 0x0018 +#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_10 (0x0 << 3) +#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_100 (0x1 << 3) +#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_1G (0x2 << 3) +#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_25G (0x3 << 3) + + +#define BRGPHY_5708S_PG0_1000X_CTL2 0x11 +#define BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN 0x0001 + +/* 5708S SerDes "Digital 3" Registers (page 2) */ +#define BRGPHY_5708S_PG2_DIGCTL_3_0 0x10 +#define BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE 0x0001 + +/* 5708S SerDes "TX Misc" Registers (page 5) */ +#define BRGPHY_5708S_PG5_2500STATUS1 0x10 +#define BRGPHY_5708S_PG5_TXACTL1 0x15 +#define BRGPHY_5708S_PG5_TXACTL3 0x17 + +/*******************************************************/ +/* End: PHY register values for the 5708S SerDes PHY */ +/*******************************************************/ -#define BRGPHY_MII_TEST1 0x1E -#define BRGPHY_TEST1_TRIM_EN 0x0010 -#define BRGPHY_TEST1_CRC_EN 0x8000 - -#define BRGPHY_MII_TEST2 0x1F - -/*******************************************************/ -/* End: PHY register values for the 5706 PHY */ -/*******************************************************/ - -/*******************************************************/ -/* Begin: PHY register values for the 5708S SerDes PHY */ -/*******************************************************/ - -/* Autoneg Next Page Transmit 1 Regiser */ -#define BRGPHY_5708S_ANEG_NXT_PG_XMIT1 0x0B -#define BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G 0x0001 - -/* Use the BLOCK_ADDR register to select the page for registers 0x10 to 0x1E */ -#define BRGPHY_5708S_BLOCK_ADDR 0x1f -#define BRGPHY_5708S_DIG_PG0 0x0000 -#define BRGPHY_5708S_DIG3_PG2 0x0002 -#define BRGPHY_5708S_TX_MISC_PG5 0x0005 - -/* 5708S SerDes "Digital" Registers (page 0) */ -#define BRGPHY_5708S_PG0_1000X_CTL1 0x10 -#define BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN 0x0010 -#define BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE 0x0001 - -#define BRGPHY_5708S_PG0_1000X_STAT1 0x14 -#define BRGPHY_5708S_PG0_1000X_STAT1_LINK 0x0002 -#define BRGPHY_5708S_PG0_1000X_STAT1_FDX 0x0004 -#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_MASK 0x0018 -#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_10 (0x0 << 3) -#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_100 (0x1 << 3) -#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_1G (0x2 << 3) -#define BRGPHY_5708S_PG0_1000X_STAT1_SPEED_25G (0x3 << 3) - - -#define BRGPHY_5708S_PG0_1000X_CTL2 0x11 -#define BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN 0x0001 - -/* 5708S SerDes "Digital 3" Registers (page 2) */ -#define BRGPHY_5708S_PG2_DIGCTL_3_0 0x10 -#define BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE 0x0001 - -/* 5708S SerDes "TX Misc" Registers (page 5) */ -#define BRGPHY_5708S_PG5_2500STATUS1 0x10 -#define BRGPHY_5708S_PG5_TXACTL1 0x15 -#define BRGPHY_5708S_PG5_TXACTL3 0x17 - -/*******************************************************/ -/* End: PHY register values for the 5708S SerDes PHY */ -/*******************************************************/ - /*******************************************************/ /* Begin: PHY register values for the 5709S SerDes PHY */ /*******************************************************/ /* 5709S SerDes "General Purpose Status" Registers */ -#define BRGPHY_BLOCK_ADDR_GP_STATUS 0x8120 -#define BRGPHY_GP_STATUS_TOP_ANEG_STATUS 0x1B -#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK 0x3F00 -#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10 0x0000 -#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100 0x0100 -#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G 0x0200 -#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G 0x0300 -#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1GKX 0x0D00 -#define BRGPHY_GP_STATUS_TOP_ANEG_FDX 0x0008 -#define BRGPHY_GP_STATUS_TOP_ANEG_LINK_UP 0x0004 -#define BRGPHY_GP_STATUS_TOP_ANEG_CL73_COMP 0x0001 +#define BRGPHY_BLOCK_ADDR_GP_STATUS 0x8120 +#define BRGPHY_GP_STATUS_TOP_ANEG_STATUS 0x1B +#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK 0x3F00 +#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10 0x0000 +#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100 0x0100 +#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G 0x0200 +#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G 0x0300 +#define BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1GKX 0x0D00 +#define BRGPHY_GP_STATUS_TOP_ANEG_FDX 0x0008 +#define BRGPHY_GP_STATUS_TOP_ANEG_LINK_UP 0x0004 +#define BRGPHY_GP_STATUS_TOP_ANEG_CL73_COMP 0x0001 /* 5709S SerDes "SerDes Digital" Registers */ -#define BRGPHY_BLOCK_ADDR_SERDES_DIG 0x8300 -#define BRGPHY_SERDES_DIG_1000X_CTL1 0x0010 -#define BRGPHY_SD_DIG_1000X_CTL1_AUTODET 0x0010 -#define BRGPHY_SD_DIG_1000X_CTL1_FIBER 0x0001 +#define BRGPHY_BLOCK_ADDR_SERDES_DIG 0x8300 +#define BRGPHY_SERDES_DIG_1000X_CTL1 0x0010 +#define BRGPHY_SD_DIG_1000X_CTL1_AUTODET 0x0010 +#define BRGPHY_SD_DIG_1000X_CTL1_FIBER 0x0001 /* 5709S SerDes "Over 1G" Registers */ -#define BRGPHY_BLOCK_ADDR_OVER_1G 0x8320 -#define BRGPHY_OVER_1G_UNFORMAT_PG1 0x19 +#define BRGPHY_BLOCK_ADDR_OVER_1G 0x8320 +#define BRGPHY_OVER_1G_UNFORMAT_PG1 0x19 /* 5709S SerDes "Multi-Rate Backplane Ethernet" Registers */ -#define BRGPHY_BLOCK_ADDR_MRBE 0x8350 -#define BRGPHY_MRBE_MSG_PG5_NP 0x10 -#define BRGPHY_MRBE_MSG_PG5_NP_MBRE 0x0001 -#define BRGPHY_MRBE_MSG_PG5_NP_T2 0x0001 +#define BRGPHY_BLOCK_ADDR_MRBE 0x8350 +#define BRGPHY_MRBE_MSG_PG5_NP 0x10 +#define BRGPHY_MRBE_MSG_PG5_NP_MBRE 0x0001 +#define BRGPHY_MRBE_MSG_PG5_NP_T2 0x0002 /* 5709S SerDes "IEEE Clause 73 User B0" Registers */ -#define BRGPHY_BLOCK_ADDR_CL73_USER_B0 0x8370 -#define BRGPHY_CL73_USER_B0_MBRE_CTL1 0x12 +#define BRGPHY_BLOCK_ADDR_CL73_USER_B0 0x8370 +#define BRGPHY_CL73_USER_B0_MBRE_CTL1 0x12 #define BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP 0x2000 #define BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR 0x4000 -#define BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG 0x8000 +#define BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG 0x8000 /* 5709S SerDes "IEEE Clause 73 User B0" Registers */ -#define BRGPHY_BLOCK_ADDR_ADDR_EXT 0xFFD0 +#define BRGPHY_BLOCK_ADDR_ADDR_EXT 0xFFD0 /* 5709S SerDes "Combo IEEE 0" Registers */ -#define BRGPHY_BLOCK_ADDR_COMBO_IEEE0 0xFFE0 +#define BRGPHY_BLOCK_ADDR_COMBO_IEEE0 0xFFE0 -#define BRGPHY_ADDR_EXT 0x1E -#define BRGPHY_BLOCK_ADDR 0x1F +#define BRGPHY_ADDR_EXT 0x1E +#define BRGPHY_BLOCK_ADDR 0x1F -#define BRGPHY_ADDR_EXT_AN_MMD 0x3800 +#define BRGPHY_ADDR_EXT_AN_MMD 0x3800 /*******************************************************/ /* End: PHY register values for the 5709S SerDes PHY */
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010081900.o98J0aaq004252>