Date: Sun, 11 Jan 2015 21:32:03 +0000 From: williamecowell@hush.ai To: freebsd-net@freebsd.org, freebsd-virtualization@freebsd.org Subject: ipv4 routing from bhyve Message-ID: <20150111213203.60018E00B1@smtp.hushmail.com>
next in thread | raw e-mail | index | archive | help
Hello, I hope I can have some assistance. I am trying to get networking via wlan0 but without NAT or bridging (doesn't work on wifi unless WDS). say my my main network is 10.10.2.0/24, gateway/internet is 10.10.2.1, my ip is 10.10.2.252. I started to config my bhyve network on 172.16.32.0/24 I added a bridge interface with an ip of 172.16.32.1 enable forwarding and fastforwarding. from my understanding of the handbook chapter things should work when I type: # route add -net 172.16.32.0/24 10.10.2.252 route: writing to routing socket: File exists add net 172.16.32.0: gateway 10.10.2.252 fib 0: route already in table # # netstat -4nr Routing tables Internet: Destination Gateway Flags Netif Expire default 10.10.2.1 UGS lagg0 127.0.0.1 link#3 UH lo0 10.10.2.0/24 link#5 U lagg0 10.10.2.252 link#5 UHS lo0 172.16.32.0/24 link#4 U bridge0 172.16.32.1 link#4 UHS lo0 # bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:bd:0f:fc:01:10 inet 172.16.32.1 netmask 0xffffff00 broadcast 172.16.32.255 nd6 options=9<PERFORMNUD,IFDISABLED> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 6 priority 128 path cost 2000000 lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ... inet 10.10.2.252 netmask 0xffffff00 broadcast 10.10.2.255 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect status: active laggproto failover lagghash l2,l3,l4 laggport: alc0 flags=1<MASTER> laggport: wlan0 flags=4<ACTIVE> tap0: flags=8903<UP,BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> ether 00:bd:8f:62:67:10 nd6 options=9<PERFORMNUD,IFDISABLED> media: Ethernet autoselect status: no carrier wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ... pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33160 tap9: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> ether 00:bd:cb:46:02:09 nd6 options=1<PERFORMNUD> media: Ethernet autoselect status: no carrier tap1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> ether 00:bd:58:61:02:01 nd6 options=1<PERFORMNUD> media: Ethernet autoselect status: no carrier Willy, PS. sorry for the x post as wasn't sure which list..
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150111213203.60018E00B1>