Date: Tue, 23 Dec 2008 16:00:18 -0500 From: Mike Tancsa <mike@sentex.net> To: Ivan Voras <ivoras@freebsd.org>, freebsd-performance@freebsd.org Subject: Re: intel i7 and Hyperthreading Message-ID: <200812232100.mBNL0KPP032432@lava.sentex.ca> In-Reply-To: <gir34t$bkl$1@ger.gmane.org> References: <200812192214.mBJMEj2Q009511@lava.sentex.ca> <gir34t$bkl$1@ger.gmane.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
At 11:20 AM 12/23/2008, Ivan Voras wrote:
>Mike Tancsa wrote:
>
>>FreeBSD 7.1-PRERELEASE #0: Fri Dec 19 19:48:15 EST 2008
>> mdtancsa@ns3c.recycle.net:/usr/obj/usr/src/sys/recycle
>>Timecounter "i8254" frequency 1193182 Hz quality 0
>>CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2666.78-MHz
>>686-class CPU)
>> Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
>>
>>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>
>>
>>Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
>>
>> AMD Features=0x28100000<NX,RDTSCP,LM>
>> AMD Features2=0x1<LAHF>
>> Cores per package: 8
>> Logical CPUs per core: 2
>>real memory = 2138992640 (2039 MB)
>>avail memory = 2084880384 (1988 MB)
>>ACPI APIC Table: <INTEL DX58SO >
>>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>> cpu0 (BSP): APIC ID: 0
>> cpu1 (AP): APIC ID: 1
>> cpu2 (AP): APIC ID: 2
>> cpu3 (AP): APIC ID: 3
>> cpu4 (AP): APIC ID: 4
>> cpu5 (AP): APIC ID: 5
>> cpu6 (AP): APIC ID: 6
>> cpu7 (AP): APIC ID: 7
>
>I just thought of another thing - can you boot an 8-CURRENT kernel
>on the machine and report the value of kern.sched.topology_spec
>sysctl? This is to verify how the ULE sees the HTT topology of the CPUs.
I have a bit of delay, so I can run it with another disk for a day.
0[current]# sysctl -A kern.sched
kern.sched.preemption: 1
kern.sched.topology_spec: <groups>
<group level="1" cache-level="0">
<cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
<flags></flags>
</group>
</groups>
kern.sched.steal_thresh: 3
kern.sched.steal_idle: 1
kern.sched.steal_htt: 1
kern.sched.balance_interval: 133
kern.sched.balance: 1
kern.sched.affinity: 1
kern.sched.idlespinthresh: 4
kern.sched.idlespins: 10000
kern.sched.static_boost: 160
kern.sched.preempt_thresh: 64
kern.sched.interact: 30
kern.sched.slice: 13
kern.sched.name: ULE
0[current]#
I tried to boot off the eSata drive, but HEAD does not understand the
controller properly as it never sees the disk. From the BIOS, it
says its a marvel thingy and pciconf sees it that way too...Also, the
ichwd doesnt seem to work. Its possible its disabled on the
motherboard. dmesg and pciconf attached
atapci0@pci0:6:0:0: class=0x01018f card=0x4f538086
chip=0x612111ab rev=0xb2 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '6121 SATA2 Controller'
class = mass storage
subclass = ATA
cap 01[48] = powerspec 2 supports D0 D1 D3 current D0
cap 05[50] = MSI supports 1 message
cap 10[e0] = PCI-Express 1 legacy endpoint
---Mike
[-- Attachment #2 --]
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #5: Tue Dec 23 15:12:16 EST 2008
mdtancsa@current.sentex.ca:/usr/obj/usr/src/sys/server
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ebc000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2666781568 Hz
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2666.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 8
Logical CPUs per core: 2
Data TLB: 4 KB pages, 4-way set associative, 64 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory = 2138992640 (2039 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000007b23bfff, 2049011712 bytes (500247 pages)
0x000000007d677000 - 0x000000007f6bcfff, 33841152 bytes (8262 pages)
0x000000007f6bf000 - 0x000000007f718fff, 368640 bytes (90 pages)
0x000000007f7bf000 - 0x000000007f7d6fff, 98304 bytes (24 pages)
avail memory = 2082009088 (1985 MB)
Table 'FACP' at 0x7f7fd000
Table 'APIC' at 0x7f7f7000
MADT: Found table at 0x7f7f7000
MP Configuration Table version 1.4 found at 0xc00ff4d0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 1: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 2: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 3: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 4: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 5: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 6: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 7: enabled
SMP: Added CPU 7 (AP)
MADT: Found CPU APIC ID 16 ACPI ID 1: disabled
MADT: Found CPU APIC ID 18 ACPI ID 3: disabled
MADT: Found CPU APIC ID 20 ACPI ID 5: disabled
MADT: Found CPU APIC ID 22 ACPI ID 7: disabled
MADT: Found CPU APIC ID 17 ACPI ID 9: disabled
MADT: Found CPU APIC ID 19 ACPI ID 11: disabled
MADT: Found CPU APIC ID 21 ACPI ID 13: disabled
MADT: Found CPU APIC ID 23 ACPI ID 15: disabled
ACPI APIC Table: <INTEL DX58SO >
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 4
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 5
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 6
APIC: CPU 6 has ACPI ID 3
APIC: CPU 7 has ACPI ID 7
pnpbios: Found PnP BIOS data at 0xc00fe0e0
pnpbios: Entry = f0000:aef9 Rev = 1.0
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP @ 0x0xfe020/0x0024 (v 2 INTEL )
ACPI: XSDT @ 0x0x7f7fe120/0x006C (v 1 INTEL DX58SO 0x0000084F 0x01000013)
ACPI: FACP @ 0x0x7f7fd000/0x00F4 (v 3 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 450/0 [20070320]
ACPI: DSDT @ 0x0x7f7f8000/0x43CE (v 2 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: FACS @ 0x0x7f72b000/0x0040
ACPI: APIC @ 0x0x7f7f7000/0x0138 (v 2 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: WDDT @ 0x0x7f7f6000/0x0040 (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: MCFG @ 0x0x7f7f5000/0x003C (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: ASF! @ 0x0x7f7f4000/0x00AC (v 32 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: SSDT @ 0x0x7f7ea000/0x70AC (v 1 INTEL SSDT PM 0x0000084F MSFT 0x0100000D)
ACPI: DMAR @ 0x0x7f7e7000/0x0140 (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: WDTT @ 0x0x7f7f2000/0x020C (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: ASPT @ 0x0x7f7f3000/0x0034 (v 4 INTEL PerfTune 0x0000084F MSFT 0x0100000D)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: level
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: level
lapic2: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: level
lapic4: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: level
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: level
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: level
lapic3: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: level
lapic5: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: level
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Ignoring local NMI routed to ACPI CPU 9
MADT: Ignoring local NMI routed to ACPI CPU 10
MADT: Ignoring local NMI routed to ACPI CPU 11
MADT: Ignoring local NMI routed to ACPI CPU 12
MADT: Ignoring local NMI routed to ACPI CPU 13
MADT: Ignoring local NMI routed to ACPI CPU 14
MADT: Ignoring local NMI routed to ACPI CPU 15
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
cpu0 BSP:
ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Dec 23 2008 15:11:56)
npx0: INT 16 interface
acpi0: <INTEL DX58SO> on motherboard
PCIe: Memory Mapped configuration base @ 0xf8000000
pcibios: No call entry point
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc4e9e000 pa 0x1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PAMX -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.IELK.ELR0 -> bus 0 dev 0 func 0
ACPI timer: 1/2 1/2 1/2 1/1 1/0 1/0 1/1 1/2 1/0 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3405, revid=0x12
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3408, revid=0x12
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0140, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340a, revid=0x12
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340e, revid=0x12
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0140, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3425, revid=0x12
domain=0, bus=0, slot=16, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3426, revid=0x12
domain=0, bus=0, slot=16, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x342e, revid=0x12
domain=0, bus=0, slot=20, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3422, revid=0x12
domain=0, bus=0, slot=20, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3423, revid=0x12
domain=0, bus=0, slot=20, func=2
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3438, revid=0x12
domain=0, bus=0, slot=20, func=3
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x10cc, revid=0x00
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xe4400000, size 17, enabled
map[14]: type Memory, range 32, base 0xe4422000, size 12, enabled
map[18]: type I/O Port, range 32, base 0x40e0, size 5, enabled
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0x40c0, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x40a0, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xe4421000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf6000000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x3a40, revid=0x00
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a42, revid=0x00
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a48, revid=0x00
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xe4420000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a16, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a20, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x4158, size 3, enabled
map[14]: type I/O Port, range 32, base 0x416c, size 2, enabled
map[18]: type I/O Port, range 32, base 0x4150, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x4168, size 2, enabled
map[20]: type I/O Port, range 32, base 0x4130, size 4, enabled
map[24]: type I/O Port, range 32, base 0x4120, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type Memory, range 64, base 0xf6004000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x4000, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a26, revid=0x00
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x4148, size 3, enabled
map[14]: type I/O Port, range 32, base 0x4164, size 2, enabled
map[18]: type I/O Port, range 32, base 0x4140, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x4160, size 2, enabled
map[20]: type I/O Port, range 32, base 0x4110, size 4, enabled
map[24]: type I/O Port, range 32, base 0x4100, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xe4300000-0xe43fffff
pcib2: prefetched decode 0xf4000000-0xf5ffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x13c1, dev=0x1004, revid=0x01
domain=0, bus=2, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 32 messages, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xf4000000, size 25, enabled
pcib2: requested memory range 0xf4000000-0xf5ffffff: good
map[18]: type Memory, range 64, base 0xe4300000, size 12, enabled
pcib2: requested memory range 0xe4300000-0xe4300fff: good
map[20]: type I/O Port, range 32, base 0x3000, size 8, enabled
pcib2: requested I/O range 0x3000-0x30ff: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
3ware device driver for 9000 series storage controllers, version: 3.70.05.001
twa0: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem 0xf4000000-0xf5ffffff,0xe4300000-0xe4300fff irq 16 at device 0.0 on pci2
twa0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xe4300000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
twa0: [MPSAFE]
twa0: [ITHREAD]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x40e0-0x40ff mem 0xe4400000-0xe441ffff,0xe4422000-0xe4422fff irq 20 at device 25.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe4400000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 50
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xe4422000
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1c:c0:92:d5:83
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.1 (no driver attached)
pci0: <serial bus, USB> at device 26.2 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xe4200000-0xe42fffff
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x14e4, dev=0x1677, revid=0x01
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xe4200000, size 16, enabled
pcib5: requested memory range 0xe4200000-0xe420ffff: good
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
pci0:5:0:0: bad VPD cksum, remain 9
bge0: <HPQ 10/100/1000 Copper Based Gigabit Adapter, ASIC rev. 0x4001> mem 0xe4200000-0xe420ffff irq 17 at device 0.0 on pci5
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe4200000
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0018, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:10:18:14:15:12
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x2000-0x2fff
pcib6: memory decode 0xe4100000-0xe41fffff
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
found-> vendor=0x11ab, dev=0x6121, revid=0xb2
domain=0, bus=6, slot=0, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x2018, size 3, enabled
pcib6: requested I/O range 0x2018-0x201f: in range
map[14]: type I/O Port, range 32, base 0x2024, size 2, enabled
pcib6: requested I/O range 0x2024-0x2027: in range
map[18]: type I/O Port, range 32, base 0x2010, size 3, enabled
pcib6: requested I/O range 0x2010-0x2017: in range
map[1c]: type I/O Port, range 32, base 0x2020, size 2, enabled
pcib6: requested I/O range 0x2020-0x2023: in range
map[20]: type I/O Port, range 32, base 0x2000, size 4, enabled
pcib6: requested I/O range 0x2000-0x200f: in range
map[24]: type Memory, range 32, base 0xe4100000, size 10, enabled
pcib6: requested memory range 0xe4100000-0xe41003ff: good
pcib6: matched entry for 6.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 16
atapci0: <Marvell 88SX6121 UDMA133 controller> port 0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem 0xe4100000-0xe41003ff irq 16 at device 0.0 on pci6
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x2018
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x2024
ata2: reset tp1 mask=03 ostat0=60 ostat1=70
ata2: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata2: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata2: reset tp2 stat0=20 stat1=30 devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0x1000-0x1fff
pcib7: memory decode 0xe2000000-0xe40fffff
pcib7: prefetched decode 0xe0000000-0xe1ffffff
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found-> vendor=0x121a, dev=0x0005, revid=0x01
domain=0, bus=7, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x8090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xe2000000, size 25, enabled
pcib7: requested memory range 0xe2000000-0xe3ffffff: good
map[14]: type Prefetchable Memory, range 32, base 0xe0000000, size 25, enabled
pcib7: requested memory range 0xe0000000-0xe1ffffff: good
map[18]: type I/O Port, range 32, base 0x1000, size 8, enabled
pcib7: requested I/O range 0x1000-0x10ff: in range
pcib7: matched entry for 7.2.INTA
pcib7: slot 2 INTA hardwired to IRQ 18
found-> vendor=0x104c, dev=0x8023, revid=0x00
domain=0, bus=7, slot=3, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xe4004000, size 11, enabled
pcib7: requested memory range 0xe4004000-0xe40047ff: good
map[14]: type Memory, range 32, base 0xe4000000, size 14, enabled
pcib7: requested memory range 0xe4000000-0xe4003fff: good
pcib7: matched entry for 7.3.INTA
pcib7: slot 3 INTA hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xe2000000-0xe3ffffff,0xe0000000-0xe1ffffff irq 18 at device 2.0 on pci7
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe4004000-0xe40047ff,0xe4000000-0xe4003fff irq 19 at device 3.0 on pci7
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe4004000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:39:70:e3
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7f68c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port 0x4158-0x415f,0x416c-0x416f,0x4150-0x4157,0x4168-0x416b,0x4130-0x413f,0x4120-0x412f irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4130
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x4120
ata3: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x4158
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x416c
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x4150
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x4168
ata4: reset tp1 mask=03 ostat0=7f ostat1=7f
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=ff devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port 0x4148-0x414f,0x4164-0x4167,0x4140-0x4147,0x4160-0x4163,0x4110-0x411f,0x4100-0x410f irq 18 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4110
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0x4100
ata5: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x4148
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x4164
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x4140
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x4160
ata6: reset tp1 mask=03 ostat0=7f ostat1=7f
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata6: reset tp2 stat0=ff stat1=ff devices=0x0
ata6: [MPSAFE]
ata6: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (19, 20)
est0: Invalid freq 2527, ignored.
est0: Invalid id16 (set, cur) = (18, 20)
est0: Invalid freq 2394, ignored.
est0: Invalid id16 (set, cur) = (17, 20)
est0: Invalid freq 2261, ignored.
est0: Invalid id16 (set, cur) = (16, 20)
est0: Invalid freq 2128, ignored.
est0: Invalid id16 (set, cur) = (15, 20)
est0: Invalid freq 1995, ignored.
est0: Invalid id16 (set, cur) = (14, 20)
est0: Invalid freq 1862, ignored.
est0: Invalid id16 (set, cur) = (13, 20)
est0: Invalid freq 1729, ignored.
est0: Invalid id16 (set, cur) = (12, 20)
est0: Invalid freq 1596, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (19, 20)
est1: Invalid freq 2527, ignored.
est1: Invalid id16 (set, cur) = (18, 20)
est1: Invalid freq 2394, ignored.
est1: Invalid id16 (set, cur) = (17, 20)
est1: Invalid freq 2261, ignored.
est1: Invalid id16 (set, cur) = (16, 20)
est1: Invalid freq 2128, ignored.
est1: Invalid id16 (set, cur) = (15, 20)
est1: Invalid freq 1995, ignored.
est1: Invalid id16 (set, cur) = (14, 20)
est1: Invalid freq 1862, ignored.
est1: Invalid id16 (set, cur) = (13, 20)
est1: Invalid freq 1729, ignored.
est1: Invalid id16 (set, cur) = (12, 20)
est1: Invalid freq 1596, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (19, 20)
est2: Invalid freq 2527, ignored.
est2: Invalid id16 (set, cur) = (18, 20)
est2: Invalid freq 2394, ignored.
est2: Invalid id16 (set, cur) = (17, 20)
est2: Invalid freq 2261, ignored.
est2: Invalid id16 (set, cur) = (16, 20)
est2: Invalid freq 2128, ignored.
est2: Invalid id16 (set, cur) = (15, 20)
est2: Invalid freq 1995, ignored.
est2: Invalid id16 (set, cur) = (14, 20)
est2: Invalid freq 1862, ignored.
est2: Invalid id16 (set, cur) = (13, 20)
est2: Invalid freq 1729, ignored.
est2: Invalid id16 (set, cur) = (12, 20)
est2: Invalid freq 1596, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (19, 20)
est3: Invalid freq 2527, ignored.
est3: Invalid id16 (set, cur) = (18, 20)
est3: Invalid freq 2394, ignored.
est3: Invalid id16 (set, cur) = (17, 20)
est3: Invalid freq 2261, ignored.
est3: Invalid id16 (set, cur) = (16, 20)
est3: Invalid freq 2128, ignored.
est3: Invalid id16 (set, cur) = (15, 20)
est3: Invalid freq 1995, ignored.
est3: Invalid id16 (set, cur) = (14, 20)
est3: Invalid freq 1862, ignored.
est3: Invalid id16 (set, cur) = (13, 20)
est3: Invalid freq 1729, ignored.
est3: Invalid id16 (set, cur) = (12, 20)
est3: Invalid freq 1596, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (19, 20)
est4: Invalid freq 2527, ignored.
est4: Invalid id16 (set, cur) = (18, 20)
est4: Invalid freq 2394, ignored.
est4: Invalid id16 (set, cur) = (17, 20)
est4: Invalid freq 2261, ignored.
est4: Invalid id16 (set, cur) = (16, 20)
est4: Invalid freq 2128, ignored.
est4: Invalid id16 (set, cur) = (15, 20)
est4: Invalid freq 1995, ignored.
est4: Invalid id16 (set, cur) = (14, 20)
est4: Invalid freq 1862, ignored.
est4: Invalid id16 (set, cur) = (13, 20)
est4: Invalid freq 1729, ignored.
est4: Invalid id16 (set, cur) = (12, 20)
est4: Invalid freq 1596, ignored.
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (19, 20)
est5: Invalid freq 2527, ignored.
est5: Invalid id16 (set, cur) = (18, 20)
est5: Invalid freq 2394, ignored.
est5: Invalid id16 (set, cur) = (17, 20)
est5: Invalid freq 2261, ignored.
est5: Invalid id16 (set, cur) = (16, 20)
est5: Invalid freq 2128, ignored.
est5: Invalid id16 (set, cur) = (15, 20)
est5: Invalid freq 1995, ignored.
est5: Invalid id16 (set, cur) = (14, 20)
est5: Invalid freq 1862, ignored.
est5: Invalid id16 (set, cur) = (13, 20)
est5: Invalid freq 1729, ignored.
est5: Invalid id16 (set, cur) = (12, 20)
est5: Invalid freq 1596, ignored.
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (19, 20)
est6: Invalid freq 2527, ignored.
est6: Invalid id16 (set, cur) = (18, 20)
est6: Invalid freq 2394, ignored.
est6: Invalid id16 (set, cur) = (17, 20)
est6: Invalid freq 2261, ignored.
est6: Invalid id16 (set, cur) = (16, 20)
est6: Invalid freq 2128, ignored.
est6: Invalid id16 (set, cur) = (15, 20)
est6: Invalid freq 1995, ignored.
est6: Invalid id16 (set, cur) = (14, 20)
est6: Invalid freq 1862, ignored.
est6: Invalid id16 (set, cur) = (13, 20)
est6: Invalid freq 1729, ignored.
est6: Invalid id16 (set, cur) = (12, 20)
est6: Invalid freq 1596, ignored.
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (19, 20)
est7: Invalid freq 2527, ignored.
est7: Invalid id16 (set, cur) = (18, 20)
est7: Invalid freq 2394, ignored.
est7: Invalid id16 (set, cur) = (17, 20)
est7: Invalid freq 2261, ignored.
est7: Invalid id16 (set, cur) = (16, 20)
est7: Invalid freq 2128, ignored.
est7: Invalid id16 (set, cur) = (15, 20)
est7: Invalid freq 1995, ignored.
est7: Invalid id16 (set, cur) = (14, 20)
est7: Invalid freq 1862, ignored.
est7: Invalid id16 (set, cur) = (13, 20)
est7: Invalid freq 1729, ignored.
est7: Invalid id16 (set, cur) = (12, 20)
est7: Invalid freq 1596, ignored.
p4tcc7: <CPU Frequency Thermal Control> on cpu7
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xca7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 133551 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669539 hz
Timecounter "TSC" frequency 2666781568 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: identify ch->devices=00000000
ata1: identify ch->devices=00000000
ata2: identify ch->devices=00000000
ata3:firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
identify ch->devices=00000001
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 76319MB <Seagate ST3808110AS 2AAA> at ata3-master SATA300
ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ata4: identify ch->devices=00000000
ata5: identify ch->devices=00000000
ata6: identify ch->devices=00000000
GEOM: ad6s1: geometry does not match label.
(probe0:twa0:0:0:0): error 22
(probe0:twa0:0:0:0): Unretryable Error
(probe1:twa0:0:1:0): error 22
(probe1:twa0:0:1:0): Unretryable Error
(probe2:twa0:0:2:0): error 22
(probe2:twa0:0:2:0): Unretryable Error
(probe3:twa0:0:3:0): error 22
(probe3:twa0:0:3:0): Unretryable Error
(probe4:twa0:0:4:0): error 22
(probe4:twa0:0:4:0): Unretryable Error
(probe5:twa0:0:5:0): error 22
(probe5:twa0:0:5:0): Unretryable Error
(probe6:twa0:0:6:0): error 22
(probe6:twa0:0:6:0): Unretryable Error
(probe7:twa0:0:7:0): error 22
(probe7:twa0:0:7:0): Unretryable Error
(probe8:twa0:0:8:0): error 22
(probe8:twa0:0:8:0): Unretryable Error
(probe9:twa0:0:9:0): error 22
(probe9:twa0:0:9:0): Unretryable Error
(probe10:twa0:0:10:0): error 22
(probe10:twa0:0:10:0): Unretryable Error
(probe11:twa0:0:11:0): error 22
(probe11:twa0:0:11:0): Unretryable Error
(probe12:twa0:0:12:0): error 22
(probe12:twa0:0:12:0): Unretryable Error
(probe13:twa0:0:13:0): error 22
(probe13:twa0:0:13:0): Unretryable Error
(probe14:twa0:0:14:0): error 22
(probe14:twa0:0:14:0): Unretryable Error
(probe15:twa0:0:15:0): error 22
(probe15:twa0:0:15:0): Unretryable Error
(probe16:twa0:0:16:0): error 22
(probe16:twa0:0:16:0): Unretryable Error
(probe17:twa0:0:17:0): error 22
(probe17:twa0:0:17:0): Unretryable Error
(probe18:twa0:0:18:0): error 22
(probe18:twa0:0:18:0): Unretryable Error
(probe19:twa0:0:19:0): error 22
(probe19:twa0:0:19:0): Unretryable Error
(probe20:twa0:0:20:0): error 22
(probe20:twa0:0:20:0): Unretryable Error
(probe21:twa0:0:21:0): error 22
(probe21:twa0:0:21:0): Unretryable Error
(probe22:twa0:0:22:0): error 22
(probe22:twa0:0:22:0): Unretryable Error
(probe23:twa0:0:23:0): error 22
(probe23:twa0:0:23:0): Unretryable Error
(probe24:twa0:0:24:0): error 22
(probe24:twa0:0:24:0): Unretryable Error
(probe25:twa0:0:25:0): error 22
(probe25:twa0:0:25:0): Unretryable Error
(probe26:twa0:0:26:0): error 22
(probe26:twa0:0:26:0): Unretryable Error
(probe27:twa0:0:27:0): error 22
(probe27:twa0:0:27:0): Unretryable Error
(probe28:twa0:0:28:0): error 22
(probe28:twa0:0:28:0): Unretryable Error
(probe29:twa0:0:29:0): error 22
(probe29:twa0:0:29:0): Unretryable Error
(probe30:twa0:0:30:0): error 22
(probe30:twa0:0:30:0): Unretryable Error
(probe31:twa0:0:31:0): error 22
(probe31:twa0:0:31:0): Unretryable Error
(probe0:twa0:0:0:0): error 22
(probe0:twa0:0:0:0): Unretryable Error
(probe1:twa0:0:1:0): error 22
(probe1:twa0:0:1:0): Unretryable Error
(probe2:twa0:0:2:0): error 22
(probe2:twa0:0:2:0): Unretryable Error
(probe3:twa0:0:3:0): error 22
(probe3:twa0:0:3:0): Unretryable Error
(probe4:twa0:0:4:0): error 22
(probe4:twa0:0:4:0): Unretryable Error
(probe5:twa0:0:5:0): error 22
(probe5:twa0:0:5:0): Unretryable Error
(probe6:twa0:0:6:0): error 22
(probe6:twa0:0:6:0): Unretryable Error
(probe7:twa0:0:7:0): error 22
(probe7:twa0:0:7:0): Unretryable Error
(probe8:twa0:0:8:0): error 22
(probe8:twa0:0:8:0): Unretryable Error
(probe9:twa0:0:9:0): error 22
(probe9:twa0:0:9:0): Unretryable Error
(probe10:twa0:0:10:0): error 22
(probe10:twa0:0:10:0): Unretryable Error
(probe11:twa0:0:11:0): error 22
(probe11:twa0:0:11:0): Unretryable Error
(probe12:twa0:0:12:0): error 22
(probe12:twa0:0:12:0): Unretryable Error
(probe13:twa0:0:13:0): error 22
(probe13:twa0:0:13:0): Unretryable Error
(probe14:twa0:0:14:0): error 22
(probe14:twa0:0:14:0): Unretryable Error
(probe15:twa0:0:15:0): error 22
(probe15:twa0:0:15:0): Unretryable Error
(probe16:twa0:0:16:0): error 22
(probe16:twa0:0:16:0): Unretryable Error
(probe17:twa0:0:17:0): error 22
(probe17:twa0:0:17:0): Unretryable Error
(probe18:twa0:0:18:0): error 22
(probe18:twa0:0:18:0): Unretryable Error
(probe19:twa0:0:19:0): error 22
(probe19:twa0:0:19:0): Unretryable Error
(probe20:twa0:0:20:0): error 22
(probe20:twa0:0:20:0): Unretryable Error
(probe21:twa0:0:21:0): error 22
(probe21:twa0:0:21:0): Unretryable Error
(probe22:twa0:0:22:0): error 22
(probe22:twa0:0:22:0): Unretryable Error
(probe23:twa0:0:23:0): error 22
(probe23:twa0:0:23:0): Unretryable Error
(probe24:twa0:0:24:0): error 22
(probe24:twa0:0:24:0): Unretryable Error
(probe25:twa0:0:25:0): error 22
(probe25:twa0:0:25:0): Unretryable Error
(probe26:twa0:0:26:0): error 22
(probe26:twa0:0:26:0): Unretryable Error
(probe27:twa0:0:27:0): error 22
(probe27:twa0:0:27:0): Unretryable Error
(probe28:twa0:0:28:0): error 22
(probe28:twa0:0:28:0): Unretryable Error
(probe29:twa0:0:29:0): error 22
(probe29:twa0:0:29:0): Unretryable Error
(probe30:twa0:0:30:0): error 22
(probe30:twa0:0:30:0): Unretryable Error
(probe31:twa0:0:31:0): error 22
(probe31:twa0:0:31:0): Unretryable Error
ATA PseudoRAID loaded
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 2
ioapic0: Assigning ISA IRQ 14 to local APIC 4
ioapic0: Assigning ISA IRQ 15 to local APIC 6
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 2
ioapic0: Assigning PCI IRQ 18 to local APIC 4
ioapic0: Assigning PCI IRQ 19 to local APIC 6
msi: Assigning MSI IRQ 256 to local APIC 0
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad6s1a
ct_to_ts([2008-12-23 15:48:31]) = 1230047311.000000000
start_init: trying /sbin/init
lock order reversal:
1st 0xc5159044 user map (user map) @ /usr/src/sys/vm/vm_map.c:3115
2nd 0xc560aad0 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper(c0ac7a48,c4eb490c,c07b4b95,4,c0ac2fa3,...) at db_trace_self_wrapper+0x26
kdb_backtrace(4,c0ac2fa3,c5110728,c5115388,c4eb4968,...) at kdb_backtrace+0x29
_witness_debugger(c0aca732,c560aad0,c0abe026,c5115388,c0ad144b,...) at _witness_debugger+0x25
witness_checkorder(c560aad0,1,c0ad144b,81f,0,...) at witness_checkorder+0x839
__lockmgr_args(c560aad0,200501,c560aaec,0,0,...) at __lockmgr_args+0x237
ffs_lock(c4eb4a78,c07b493b,c0ae7d46,200501,c560aa78,...) at ffs_lock+0x8a
VOP_LOCK1_APV(c0bb36e0,c4eb4a78,c5155e24,c0bc7540,c560aa78,...) at VOP_LOCK1_APV+0xa5
_vn_lock(c560aa78,200501,c0ad144b,81f,4,...) at _vn_lock+0x5e
vget(c560aa78,200501,c5155d80,4b4,0,...) at vget+0xc9
vnode_pager_lock(c1477d14,0,c0ae5327,127,c4eb4c18,...) at vnode_pager_lock+0x1e0
vm_fault(c5159000,80db000,2,8,80db780,...) at vm_fault+0x1df
trap_pfault(5,0,c0af4d55,2e7,c5153d34,...) at trap_pfault+0x118
trap(c4eb4d38) at trap+0x289
calltrap() at calltrap+0x6
--- trap 0xc, eip = 0x80480e5, esp = 0xbfbfeef0, ebp = 0xbfbfef10 ---
em0: Link is up 100 Mbps Full Duplex
bge0: link UP
lock order reversal:
1st 0xd9102930 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443
2nd 0xc55fdc00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:263
KDB: stack backtrace:
db_trace_self_wrapper(c0ac7a48,e7ac387c,c07b4b95,4,c0ac2fa3,...) at db_trace_self_wrapper+0x26
kdb_backtrace(4,c0ac2fa3,c51126d8,c51153f0,e7ac38d8,...) at kdb_backtrace+0x29
_witness_debugger(c0aca732,c55fdc00,c0ae3e11,c51153f0,c0ae3aaa,...) at _witness_debugger+0x25
witness_checkorder(c55fdc00,9,c0ae3aaa,107,0,...) at witness_checkorder+0x839
_sx_xlock(c55fdc00,0,c0ae3aaa,107,c57f4258,...) at _sx_xlock+0x85
ufsdirhash_acquire(d91028d0,e7ac3a20,150,d98bbac8,e7ac39a8,...) at ufsdirhash_acquire+0x35
ufsdirhash_add(c57f4258,e7ac3a20,ac8,e7ac3994,e7ac3998,...) at ufsdirhash_add+0x13
ufs_direnter(c5984a78,c5b62218,e7ac3a20,e7ac3c04,d9102cc0,...) at ufs_direnter+0x729
ufs_mkdir(e7ac3c28,e7ac3c28,0,e7ac3c28,e7ac3bd8,...) at ufs_mkdir+0x90e
VOP_MKDIR_APV(c0bb36e0,e7ac3c28,eb6,eb4,0,...) at VOP_MKDIR_APV+0xa5
kern_mkdirat(c58036c0,ffffff9c,bfbfef66,0,1ff,...) at kern_mkdirat+0x278
kern_mkdir(c58036c0,bfbfef66,0,1ff,e7ac3d2c,...) at kern_mkdir+0x2e
mkdir(c58036c0,e7ac3cf8,8,c0acafe0,c0b91800,...) at mkdir+0x29
syscall(e7ac3d38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (136, FreeBSD ELF32, mkdir), eip = 0x2815b893, esp = 0xbfbfedac, ebp = 0xbfbfee78 ---
0[current]# pciconf -lvc
hostb0@pci0:0:0:0: class=0x060000 card=0x4f538086 chip=0x34058086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
cap 00[40] = unknown
pcib1@pci0:0:1:0: class=0x060400 card=0x4f538086 chip=0x34088086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
cap 0d[40] = PCI Bridge card=0x4f538086
cap 05[60] = MSI supports 2 messages, vector masks
cap 10[90] = PCI-Express 2 root port
cap 01[e0] = powerspec 3 supports D0 D3 current D0
pcib2@pci0:0:3:0: class=0x060400 card=0x4f538086 chip=0x340a8086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
cap 0d[40] = PCI Bridge card=0x4f538086
cap 05[60] = MSI supports 2 messages, vector masks
cap 10[90] = PCI-Express 2 root port
cap 01[e0] = powerspec 3 supports D0 D3 current D0
pcib3@pci0:0:7:0: class=0x060400 card=0x4f538086 chip=0x340e8086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
cap 0d[40] = PCI Bridge card=0x4f538086
cap 05[60] = MSI supports 2 messages, vector masks
cap 10[90] = PCI-Express 2 root port
cap 01[e0] = powerspec 3 supports D0 D3 current D0
none0@pci0:0:16:0: class=0x080000 card=0x00000000 chip=0x34258086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = base peripheral
subclass = interrupt controller
cap 09[50] = vendor (length 255) Intel cap 15 version 0
none1@pci0:0:16:1: class=0x080000 card=0x00000000 chip=0x34268086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = base peripheral
subclass = interrupt controller
none2@pci0:0:20:0: class=0x080000 card=0x00000000 chip=0x342e8086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = base peripheral
subclass = interrupt controller
cap 10[40] = PCI-Express 2 type 0
none3@pci0:0:20:1: class=0x080000 card=0x00000000 chip=0x34228086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = base peripheral
subclass = interrupt controller
cap 10[40] = PCI-Express 2 type 0
none4@pci0:0:20:2: class=0x080000 card=0x00000000 chip=0x34238086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = base peripheral
subclass = interrupt controller
cap 10[40] = PCI-Express 2 type 0
none5@pci0:0:20:3: class=0x080000 card=0x00000000 chip=0x34388086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = base peripheral
subclass = interrupt controller
em0@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10cc8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
none6@pci0:0:26:0: class=0x0c0300 card=0x4f538086 chip=0x3a378086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 13[50] = unknown
none7@pci0:0:26:1: class=0x0c0300 card=0x4f538086 chip=0x3a388086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 13[50] = unknown
none8@pci0:0:26:2: class=0x0c0300 card=0x4f538086 chip=0x3a398086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 13[50] = unknown
none9@pci0:0:26:7: class=0x0c0320 card=0x4f538086 chip=0x3a3c8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
none10@pci0:0:27:0: class=0x040300 card=0x00228086 chip=0x3a3e8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
subclass = HDA
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 1 type 0
pcib4@pci0:0:28:0: class=0x060400 card=0x00000000 chip=0x3a408086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x00000000
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib5@pci0:0:28:1: class=0x060400 card=0x00000000 chip=0x3a428086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x00000000
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib6@pci0:0:28:4: class=0x060400 card=0x00000000 chip=0x3a488086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x00000000
cap 01[a0] = powerspec 2 supports D0 D3 current D0
none11@pci0:0:29:0: class=0x0c0300 card=0x4f538086 chip=0x3a348086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 13[50] = unknown
none12@pci0:0:29:1: class=0x0c0300 card=0x4f538086 chip=0x3a358086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 13[50] = unknown
none13@pci0:0:29:2: class=0x0c0300 card=0x4f538086 chip=0x3a368086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 13[50] = unknown
none14@pci0:0:29:7: class=0x0c0320 card=0x4f538086 chip=0x3a3a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib7@pci0:0:30:0: class=0x060401 card=0x4f538086 chip=0x244e8086 rev=0x90 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
cap 0d[50] = PCI Bridge card=0x4f538086
isab0@pci0:0:31:0: class=0x060100 card=0x4f538086 chip=0x3a168086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: SATA RAID-5, 4 PCI-e x1 slots
atapci1@pci0:0:31:2: class=0x01018f card=0x4f538086 chip=0x3a208086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 13[b0] = unknown
none15@pci0:0:31:3: class=0x0c0500 card=0x4f538086 chip=0x3a308086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
atapci2@pci0:0:31:5: class=0x010185 card=0x4f538086 chip=0x3a268086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 13[b0] = unknown
twa0@pci0:2:0:0: class=0x010400 card=0x100413c1 chip=0x100413c1 rev=0x01 hdr=0x00
vendor = '3ware Inc.'
device = '9650SE Series PCI-Express SATA2 Raid Controller'
class = mass storage
subclass = RAID
cap 01[40] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit
cap 10[70] = PCI-Express 1 legacy endpoint
bge0@pci0:5:0:0: class=0x020000 card=0x167714e4 chip=0x167714e4 rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express'
class = network
subclass = ethernet
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 8 messages, 64 bit
cap 10[d0] = PCI-Express 1 endpoint
atapci0@pci0:6:0:0: class=0x01018f card=0x4f538086 chip=0x612111ab rev=0xb2 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '6121 SATA2 Controller'
class = mass storage
subclass = ATA
cap 01[48] = powerspec 2 supports D0 D1 D3 current D0
cap 05[50] = MSI supports 1 message
cap 10[e0] = PCI-Express 1 legacy endpoint
vgapci0@pci0:7:2:0: class=0x030000 card=0x0036121a chip=0x0005121a rev=0x01 hdr=0x00
vendor = '3dfx Interactive Inc'
device = 'Voodoo3 All Voodoo3 chips, 3000'
class = display
subclass = VGA
cap 01[60] = powerspec 1 supports D0 D3 current D0
fwohci0@pci0:7:3:0: class=0x0c0010 card=0x4f538086 chip=0x8023104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TSB43AB21/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr'
class = serial bus
subclass = FireWire
cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0
0[current]#
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200812232100.mBNL0KPP032432>