Date: Thu, 08 Apr 2004 19:54:36 -0400 From: Jeff Doolittle <jdoolittle@kingsquarry.net> To: freebsd-current@freebsd.org Subject: ASUS P4C800-E Deluxe and ICH5R support Message-ID: <4075E63C.3060709@kingsquarry.net>
next in thread | raw e-mail | index | archive | help
I've seen eMails regarding ICH5R support on other motherboards being
added, is there plans to add support for the ASUS P4C800-E Deluxe?
I tried both FreeBSD v5.2.1 & am now updating to current on a daily
basis hoping the following error will be address:
ad12: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA = xxxx
or
ad10: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA = xxxx
and
the machine is hung, requiring a hard reset.
The following are from dmesg:
FreeBSD 5.2-CURRENT #0: Thu Apr 8 13:27:36 EDT 2004
root@saturn.kingsquarry.net:/usr/obj/usr/src/sys/GENERIC
.....
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2398.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536018944 (511 MB)
avail memory = 514789376 (490 MB)
.....
atapci0: <Promise PDC20378 SATA150 controller> port
0xd880-0xd8ff,0xdfa0-0xdfaf,0xdf00-0xdf3f mem
0xfeac0000-0xfeadffff,0xfeafe000-0xfeafefff irq 23 at device 4.0 on pci3
ata2: at 0xfeafe000 on atapci0
ata3: at 0xfeafe000 on atapci0
ata4: at 0xfeafe000 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port
0xef90-0xef9f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7
irq 18 at device 31.2 on pci0
ata5: at 0xefe0 on atapci2
ata6: at 0xefa0 on atapci2
.....
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA100
acd0: CDRW <48X12X50 CD-RW 1.04 20021101> at ata1-master PIO4
ad4: 190782MB <WDC WD2000JD-00FYB0> [387621/16/63] at ata2-master UDMA100
ad6: 190782MB <WDC WD2000JD-00FYB0> [387621/16/63] at ata3-master UDMA100
em0: Link is up 100 Mbps Full Duplex
ad10: 190782MB <WDC WD2000JD-00FYB0> [387621/16/63] at ata5-master UDMA100
ad12: 190782MB <WDC WD2000JD-00FYB0> [387621/16/63] at ata6-master UDMA100
ar0: 381564MB <ATA RAID0 array> [48642/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
ar1: 381564MB <ATA RAID0 array> [48642/255/63] status: READY subdisks:
disk0 READY on ad10 at ata5-master
disk1 READY on ad12 at ata6-master
NOTE #1: ar0 is a Promise created RAID array.
NOTE #2: at1 is a atacontrol created RAID array, because the BIOS
created is not recognized.
Basically the machine crashed when I run rsync from the Promise raid
drives to the Intel raid drives. In the past I could copy between 1 -
2gig and it would hang with the above error messages, except yesterday's
build dumped me in debug mode, today's build is the first I have seen it
acknowlegde the Intel ICH5 SATA150 controller and it errors out almost
immediately after starting rsync.
Is there more information I can/should provide to help resolve this
problem? I apologize, this is the first time I've ever had a "problem"
with FreeBSD since I started using it at v2.2.7....
Thanks.
- Jeff
Thanks...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4075E63C.3060709>