Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 19 Feb 2002 23:33:33 -0800 (PST)
From:      Tony Saign <tony@saign.com>
To:        "M. Warner Losh" <imp@village.org>
Cc:        freebsd-mobile@FreeBSD.ORG
Subject:   Re: -current hangs on boot w/ NEWCARD
Message-ID:  <200202200733.g1K7XXZ37924@opensrs.saignon.net>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
----------1014190411
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

"M. Warner Losh" <imp@village.org> wrote ..
> In message: <000001c1b98e$40a89850$ef0b010a@frankenmobl>
>             "Tony Saign" <tony@saign.com> writes:
> :  Recently tried a NEWCARD based kernel to use my cardbus ethernet
> : adapter (maybe??).
> : 
> : No errors during compile or install, recent cvsup ~02/18.
> : 
> : System not locked, just won't continue after below line;
> : 
> : Mounting root from ufs: /dev/ad0s1a
> : 
> : Any ideas?
> 
> This sounds like an interrupt storm.  Any chance that you could post
> more context from the dmesg?
> 
> Warner
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Feb 19 23:13:38 PST 2002
    root@t20freebsd.saignon.net:/usr/obj/usr/src/sys/NEWCARD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc054a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc054a0a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc054a0f8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (846.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
avail memory = 516661248 (504552K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 11 entries at 0xc00fdee0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pccbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0
cardbus0: <CardBus bus> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0
cardbus1: <CardBus bus> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
wi0: <Linksys WMP11 PCI Prism2.5> mem 0xfc000000-0xfc000fff irq 11 at device 3.0 on pci0
wi0: 802.11 address: 00:20:e0:8a:0d:e2
wi0: using RF:PRISM2.5 MAC:ISL3874A(PCI), Firmware: 1.3 variant 6
pci0: <multimedia, audio> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1800-0x180f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ad0: 6149MB <HITACHI_DK239A-65B> [13328/15/63] at ata0-master UDMA33
acd0: DVD-ROM <MATSHITADVD-ROM SR-8174> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
----------1014190411--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202200733.g1K7XXZ37924>