Date: Thu, 12 Apr 2012 23:09:27 +0200 From: Torfinn Ingolfsen <tingox@gmail.com> To: freebsd-ports@freebsd.org Subject: Re: net/samba35 "needs" to have winbindd_enable set to yes - this can't be right Message-ID: <CAJ_iqtazRmVXXFB75jyEsudi=vk1hNcii5u_kjp88q2xA5A9EA@mail.gmail.com> In-Reply-To: <20120412161517.7531647f@scorpio> References: <CAJ_iqtYjGLOw0-Zc=sJvT4Y7_OfBjsVhhgwc7nnhGpufM-NMUA@mail.gmail.com> <20120412161517.7531647f@scorpio>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Apr 12, 2012 at 10:15 PM, Jerry <jerry@seibercom.net> wrote: > On Thu, 12 Apr 2012 20:28:06 +0200 > Torfinn Ingolfsen articulated: > >> After I upgraded net/samba35 to version 3.5.14, I noticed this: >> root@kg-quiet# service samba status >> Cannot 'status' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestatus' instead of 'status'. >> root@kg-quiet# service samba start >> Cannot 'start' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestart' instead of 'start'. >> >> What? Since when? >> Ok, let's try to explicit set winbindd_enable to NO then: >> root@kg-quiet# grep winbind /etc/rc.conf >> winbindd_enable=3D"NO" >> >> root@kg-quiet# service samba status >> Cannot 'status' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestatus' instead of 'status'. >> root@kg-quiet# service samba start >> Cannot 'start' samba. Set winbindd_enable to YES in /etc/rc.conf or >> use 'onestart' instead of 'start'. >> >> Well, that defeats the purpose of having winbindd_enable at all. >> Yes, my Samba is built with WINBIND=3Don, but still it shouldn't fail >> this way. Here is my options: >> root@kg-quiet# make showconfig >> =3D=3D=3D> The following configuration options are available for >> samba35-3.5.14: LDAP=3Don "With LDAP support" >> =A0 =A0 =A0ADS=3Doff "With Active Directory support" >> =A0 =A0 =A0CUPS=3Don "With CUPS printing support" >> =A0 =A0 =A0WINBIND=3Don "With WinBIND support" >> =A0 =A0 =A0SWAT=3Doff "With SWAT WebGUI" >> =A0 =A0 =A0ACL_SUPPORT=3Doff "With ACL support" >> =A0 =A0 =A0AIO_SUPPORT=3Don "With Asyncronous IO support" >> =A0 =A0 =A0FAM_SUPPORT=3Doff "With File Alteration Monitor" >> =A0 =A0 =A0SYSLOG=3Doff "With Syslog support" >> =A0 =A0 =A0QUOTAS=3Doff "With Disk quota support" >> =A0 =A0 =A0UTMP=3Doff "With UTMP accounting support" >> =A0 =A0 =A0PAM_SMBPASS=3Doff "With PAM authentication vs passdb backends= " >> =A0 =A0 =A0DNSUPDATE=3Doff "With dynamic DNS update(require ADS)" >> =A0 =A0 =A0AVAHI=3Doff "With Bonjour service discovery support" >> =A0 =A0 =A0EXP_MODULES=3Doff "With experimental modules" >> =A0 =A0 =A0POPT=3Don "With system-wide POPT library" >> =A0 =A0 =A0IPV6=3Don "With IPv6 support" >> =A0 =A0 =A0MAX_DEBUG=3Doff "With maximum debugging" >> =A0 =A0 =A0SMBTORTURE=3Doff "With smbtorture" >> =3D=3D=3D> Use 'make config' to modify these settings >> >> and my FreeBSD version: >> root@kg-quiet# uname -a >> FreeBSD kg-quiet.kg4.no 8.2-STABLE FreeBSD 8.2-STABLE #1: Sat Jan =A07 >> 14:05:57 CET 2012 >> root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/GENERIC =A0amd64 >> >> How do I fix it? > > I had a similar experience with Samba-3.4 recently. I entered the > "WINBINDD_ENABLED=3DYES" in the /etc/rc.conf file to get Samba working. > Since I don't need the "winbindd" service, I reconfigured the Samba > port to not build with it and then rebuilt the port. But did you report that the port wasn't working as intended? > Personally, I believe that "WINBINDD" should be "OFF" by default; > however, it is easy enough to configure the port not to build with it. > I agree that it is easy to reconfigure and rebuild the port. But - the port still has a startup script that isn't working as intended; that is an error in the port. Such errors should be reported so that port maintainers so that errors might be corrected. Which is what I have done. --=20 Regards, Torfinn Ingolfsen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ_iqtazRmVXXFB75jyEsudi=vk1hNcii5u_kjp88q2xA5A9EA>