Date: Sun, 03 Jun 2001 14:05:34 -0400 From: Walter Betancourt <walt@betan.com> To: freebsd-questions@freebsd.org Subject: Re: Intel nic Message-ID: <4.2.2.20010603140215.00b94d80@pop3.palace.net> In-Reply-To: <000b01c0ec56$3a4ad820$c4e3e6cf@kimsamy.com> References: <4.2.2.20010603124125.00b6c600@pop3.palace.net> <4.2.2.20010603133911.00b67720@pop3.palace.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Kulraj, You gotta forgive me for being very dense, I must have looked at the rc.conf a dozen times and not saw the network_interfaces line, changed dc0 to fxp0 and all is well, thanks very much At 10:54 AM 6/3/01 -0700, you wrote: >Forgive me for being a little dense....... >check you rc.conf network interfaces : > >eg. > >#network interfaces >network_interfaces="lo0 fxp0 fxp1" > >That must be your problem. > >Regards, > >Kulraj Gurm > > >ps. I believe we should all be allowed one blonde moment per day; >I think I've used mine for today. :) > > > >----- Original Message ----- >From: "Walter Betancourt" <walt@betan.com> >To: <freebsd-questions@FreeBSD.ORG> >Sent: Sunday, June 03, 2001 10:45 AM >Subject: Re: Intel nic > > > > Kualraj, > > > > Good thought, I had not checked the kernel just assumed it was in the > > generic kernel > > > > did check and both fxp and mii are in the generic kernel (v 4.0) > > > > I put the original card back (linlsys lne100tx) set the rc.conf back to > > ifconfig_dc0=... > > > > and network works ok, > > > > re-install intel 100b (new card) and set the rc.conf to >ifconfig_fxp0=".... > > > > and power off boot, still no network response, > > > > lights on for "link" and "100tx" > > > > I'm still missing something, > > > > thanks > > > > > > At 10:27 AM 6/3/01 -0700, you wrote: > > >Is it included in your kernel config file? > > >Make sure you add mii bus if not already there - just in case! > > > > > >eg. > > > > > ># PCI Ethernet NICs. > > >device fxp # Intel EtherExpress PRO/100B (82557, >82558) > > > > > ># PCI Ethernet NICs that use the common MII bus controller code. > > >device miibus # MII bus support > > > > > >Regards, > > > > > >Kulraj Gurm > > > > > > > > >----- Original Message ----- > > >From: "Walter Betancourt" <walt@betan.com> > > >To: <freebsd-questions@freebsd.org> > > >Sent: Sunday, June 03, 2001 9:45 AM > > >Subject: Intel nic > > > > > > > > > > Hello all, > > > > > > > > I have replaced a Linksys LNX100 card with a Intel Pro 100b card > > > > > > > > and changed my rc.conf from > > > > > > > > ifconfig_dc0= "...... > > > > > > > > to > > > > > > > > ifconfig_fxp0=".... > > > > > > > > dmesg and ifconfig shows it recognizing the Intel card but > > > > > > > > no newwork response, only local ping 127.0.0.1 ok > > > > > > > > Is there something else I have to do to configure the Intel card ? > > > > > > > > thanks > > > > > > > > > > > > Walt > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > Walt > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message Walt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20010603140215.00b94d80>