Date: Sun, 26 Jul 1998 22:06:19 -0400 From: Mark Fullmer <maf@net.ohio-state.edu> To: Francois Jaccard <fjaccard@webshuttle.ch>, freebsd-hardware@FreeBSD.ORG Subject: Re: Support for Asus P2B-L? Message-ID: <19980726220619.A5410@net.ohio-state.edu> In-Reply-To: <199807251518.RAA28362@wwwsw.webshuttle.ch>; from Francois Jaccard on Sat, Jul 25, 1998 at 05:18:32PM %2B0200 References: <199807251518.RAA28362@wwwsw.webshuttle.ch>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jul 25, 1998 at 05:18:32PM +0200, Francois Jaccard wrote:
> Hi,
> I would like to know if the LAN chip (Intel 8255b) and the 440BX chip of the
> Asus P2B-L motherboard are supported under 3.0-current. I searched the
> archives but found nothing.
This is a P2B-LS. The LAN and SCSI controllers work except for
the "pci_map_mem failed: bad memory type=0xfffff004" message.
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.6-STABLE #0: Thu Jul 23 07:41:06 EDT 1998
maf@base.net.ohio-state.edu:/usr/src/sys/compile/BASE
CPU: Pentium II (quarter-micron) (350.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,<b
16>,<b17>,MMX,<b24>>
real memory = 268435456 (262144K bytes)
avail memory = 261001216 (254884K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7190 subclass=0)> rev 2 on pci0:0:
0
chip1 <generic PCI bridge (vendor=8086 device=7191 subclass=4)> rev 2 on pci0:1:
0
chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq 12 on pci0:4:2
chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3
ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 12 on pci0:6:0
pci_map_mem failed: bad memory type=0xfffff004
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:7:0
fxp0: Ethernet address 00:e0:18:90:28:6f
Probing for devices on PCI bus 1:
vga0 <VGA-compatible display device> rev 16 int a irq 11 on pci1:0:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
ccd0-3: Concatenated disk drivers
(probe0:ahc0:0:0:0): Sending SDTR!!
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330 !# S69D> Fixed Direct Access SCSI2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
--
mark
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980726220619.A5410>