Date: Mon, 30 Apr 2001 07:33:11 -0600 (MDT) From: Doug Russell <drussell@saturn-tech.com> To: "Kenneth D. Merry" <ken@kdm.org> Cc: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM>, freebsd-current@FreeBSD.ORG Subject: Re: camcontrol stop / restart broken Message-ID: <Pine.BSF.4.21.0104300728440.77706-100000@beastie.saturn-tech.com> In-Reply-To: <20010429171347.B41755@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 29 Apr 2001, Kenneth D. Merry wrote: > (pass1:ahc0:0:2:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (pass1:ahc0:0:2:0): CAM Status: SCSI Status Error > (pass1:ahc0:0:2:0): SCSI Status: Check Condition > (pass1:ahc0:0:2:0): NOT READY asc:4,2 > (pass1:ahc0:0:2:0): Logical unit not ready, initializing cmd. required field replaceable unit: 2 > cat:~(12)# mount /f > mount: /dev/da1s1e: Input/output error Just curious, but, does it still bomb if you manually camcontrol stop da1 camcontrol start da1 camcontrol start da1 (do it two or three times to be sure...) camcontrol start da1 mount whatever Does it still stick whenever the drive is manually powered up, or does it only stick when FreeBSD should be automatically restarting a stopped drive? I'm assuming the camcontrol start da1 just always returns an error? No? Later...... <Doug> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0104300728440.77706-100000>