Date: Thu, 4 Sep 2003 16:27:57 -0600 From: "Kenneth D. Merry" <ken@kdm.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: wintran@email.cz Subject: Re: wi0: cardbus card activation failed Message-ID: <20030904222757.GA97542@panzer.kdm.org> In-Reply-To: <20030904.100210.58947856.imp@bsdimp.com> References: <3F56E66E.000001.32122@tajfun.atc.cz> <20030904.100210.58947856.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 04, 2003 at 10:02:10 -0600, M. Warner Losh wrote: > In message: <3F56E66E.000001.32122@tajfun.atc.cz> > <wintran@email.cz> writes: > : Hello, > : I have same problem as http://lists.freebsd.org/pipermail/freebsd-current/2003-August/008948.html, > : but with other PCMCIA card - new Proxim Orinoco. > : When I plug it in, I get: > : > : cardbus0: <network, ethernet> at device 0.0 (no driver attached) > : cbb0: CardBus card activation failed > : > : I use kernel from yestereday, pccbb.c ver 1.95. > > You need a driver. This message says that none attached. Maybe > FreeBSD doesn't support this chip yet? Maybe it is supported by the > atheros driver (ath). I have the same problem with my fxp card, although it isn't because I don't have a driver or I don't have the card attached. If I pull it out and re-insert it, it probes. When I boot: cardbus0: Resource not specified in CIS: id=10, size=2000 cardbus0: <network, ethernet> at device 0.0 (no driver attached) cbb0: CardBus card activation failed After re-inserting it: fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x1000-0x103f mem 0xf6020000-0xf603ffff,0xf6040000-0xf6040fff irq 11 at device 0.0 on cardbus0 fxp0: Ethernet address 00:03:47:49:82:2b miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto (This is -current from August 16th.) Ken -- Kenneth Merry ken@kdm.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030904222757.GA97542>