Date: Wed, 03 Nov 2004 12:42:52 +0300 From: Anton Nikiforov <anton@nikiforov.ru> To: Alex Povolotsky <tarkhil@webmail.sub.ru> Cc: freebsd-usb@freebsd.org Subject: Re: USB external CD-RW and FreeBSD 5.3 Message-ID: <4188A81C.3030904@nikiforov.ru> In-Reply-To: <20041103112724.37ac9442@localhost> References: <20041101114329.7cbf6449@localhost> <xzpfz3s40q4.fsf@dwp.des.no> <20041103112724.37ac9442@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Alex Povolotsky wrote: > On Tue, 02 Nov 2004 18:30:59 +0100 > des@des.no (Dag-Erling Sm_rgrav) wrote: > > >>Alex Povolotsky <tarkhil@webmail.sub.ru> writes: >> >>>I have an external AOPEN CD-RW with USB interface, it works fine >>>with 4.10, but doesn't work with 5.ANY (including 5.3BETA7). >>> >>>5.x DOES see umass device, but doesn't see any cd device >> >>dmesg, please. > > > Here is a partial DMESG with some kernel log messages; full dmesg is available on > > http://freebsd.over.ru/dmesg.cd > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.3-STABLE #4: Tue Oct 26 14:20:15 MSD 2004 > root@tarkhil.titl.ru:/usr/obj/usr/src/sys/ARMADA > CPU: Intel Pentium III (995.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 268369920 (255 MB) > avail memory = 252944384 (241 MB) > usb1: <NEC uPD 9210 USB controller> on ohci0 > usb1: USB revision 1.0 > uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 3 ports with 3 removable, self powered > cardbus1: Resource not specified in CIS: id=10, size=1000 > found-> vendor=0x1033, dev=0x0035, revid=0x43 > bus=3, slot=0, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0xa8 (5040 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns) > intpin=b, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > ohci1: <NEC uPD 9210 USB controller> mem 0x88001000-0x88001fff irq 11 at device 0.1 on cardbus1 > ohci1: [GIANT-LOCKED] > usb2: OHCI version 1.0 > usb2: <NEC uPD 9210 USB controller> on ohci1 > usb2: USB revision 1.0 > uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > cardbus1: Resource not specified in CIS: id=10, size=100 > found-> vendor=0x1033, dev=0x00e0, revid=0x04 > bus=3, slot=0, func=2 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0xa8 (5040 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns) > intpin=c, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > cardbus1: <serial bus, USB> at device 0.2 (no driver attached) > Nov 3 10:47:26 tarkhil kernel: umass0: USB Flash Disk, rev 2.00/2.00, addr 2 > Nov 3 10:47:26 tarkhil kernel: umass0:0:0:-1: Attached to scbus0 > Nov 3 10:47:26 tarkhil kernel: pass0 at umass-sim0 bus 0 target 0 lun 0 > Nov 3 10:47:26 tarkhil kernel: pass0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2 device > Nov 3 10:47:26 tarkhil kernel: pass0: Serial Number > Nov 3 10:47:26 tarkhil kernel: pass0: 1.000MB/s transfers > Nov 3 10:47:26 tarkhil kernel: GEOM: new disk da0 > Nov 3 10:47:26 tarkhil kernel: (da0:umass-sim0:0:0:0): Retrying Command > Nov 3 10:47:26 tarkhil kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > Nov 3 10:47:26 tarkhil kernel: da0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2 device > Nov 3 10:47:26 tarkhil kernel: da0: Serial Number > Nov 3 10:47:26 tarkhil kernel: da0: 1.000MB/s transfers > Nov 3 10:47:26 tarkhil kernel: da0: 249MB (511488 512 byte sectors: 64H 32S/T 249C) > Nov 3 10:47:26 tarkhil kernel: [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):247/63/32 s:32 l:507872 > Nov 3 10:47:26 tarkhil kernel: [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > Nov 3 10:47:26 tarkhil kernel: [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > Nov 3 10:47:26 tarkhil kernel: [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 > Nov 3 10:47:26 tarkhil kernel: GEOM: Configure da0s1, start 16384 length 260030464 end 260046847 > Nov 3 10:47:39 tarkhil kernel: umass0: at uhub2 port 1 (addr 2) disconnected > Nov 3 10:47:39 tarkhil kernel: (da0:umass-sim0:0:0:0): lost device > Nov 3 10:47:39 tarkhil kernel: (da0:umass-sim0:0:0:0): removing device entry > Nov 3 10:47:39 tarkhil kernel: (pass0:umass-sim0:0:0:0): lost device > Nov 3 10:47:39 tarkhil kernel: (pass0:umass-sim0:0:0:0): removing device entry > Nov 3 10:47:39 tarkhil kernel: umass0: detached > Nov 3 10:47:55 tarkhil kernel: umass0: AOPEN Aopen USB2.0 Device, rev 2.00/0.01, addr 2 > Nov 3 10:47:55 tarkhil kernel: umass0: Get Max Lun not supported (STALLED) > Nov 3 10:47:55 tarkhil kernel: umass0:0:0:-1: Attached to scbus0 > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Retrying Command > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Retrying Command > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Retrying Command > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Retrying Command > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): error 5 > Nov 3 10:47:57 tarkhil kernel: (probe0:umass-sim0:0:0:0): Retries Exausted > > Reminding: the same unit worked fine on the same box running 4.10-RELEASE. > Hello All! I have the same problem reported in -current a few weeks ago but there was no answer yet. Here is my part of log when i do connect my USB drive: I have a Dell Latitude X300 with USB DVD/CDRW drive. When i'm trying to connect the drive i can hear it spinup and see the light blinking but got the following in the messages: Oct 22 17:00:35 latitude kernel: umass0: Dell USB Drive A01, rev 2.00/1.04, addr 2 Oct 22 17:00:35 latitude kernel: ehci_idone: need toggle update status=80018d40 nstatus=80008c80 Oct 22 17:00:35 latitude kernel: umass0: Get Max Lun not supported (STALLED) Oct 22 17:00:35 latitude kernel: umass0: Phase Error, residue = 0 Oct 22 I have a Dell Latitude X300 with USB DVD/CDRW drive. When i'm trying to connect the drive i can hear it spinup and see the light blinking but got the following in the messages: Oct 22 17:00:35 latitude kernel: umass0: Dell USB Drive A01, rev 2.00/1.04, addr 2 Oct 22 17:00:35 latitude kernel: ehci_idone: need toggle update status=80018d40 nstatus=80008c80 Oct 22 17:00:35 latitude kernel: umass0: Get Max Lun not supported (STALLED) Oct 22 17:00:35 latitude kernel: umass0: Phase Error, residue = 0 Oct 22 17:00:37 latitude last message repeated 4 times The same happend when i do remove the ehci interface from the kernel config or when i'm loading umass as a KLD. Previously 17:00:37 latitude last message repeated 4 times The same happend when i do remove the ehci interface from the kernel config or when i'm loading umass as a KLD. Previously -- (Best regads), (Anton Nikiforov) [-- Attachment #2 --] 0 *H 01 0 + 0 *H 00: 0 *H 0b1 0 UZA1%0#U Thawte Consulting (Pty) Ltd.1,0*U#Thawte Personal Freemail Issuing CA0 040305211228Z 050305211228Z0D1 0 UThawte Freemail Member1!0 *H anton@nikiforov.ru0"0 *H 0 >qNv`"9 &:Bf*Ku;,h&Pt5 -BCIZ(\X"{)Ûf<WWPUg |1X{-B֟3 j@rM@чj I'r ֨ i&ƨMٕY~O9{gRᤳfJ b+e?sxJd/kaVErzG)Kao_B\E![u]ż_{ސץ /0-0 U 0anton@nikiforov.ru0 U 0 0 *H p1zaGK,U-r%#&CTJ`Q'Xx:GQ. LD/E4;T.9iӁ> dgXq=uXn9b4[Dy<( -]>T0#-00: 0 *H 0b1 0 UZA1%0#U Thawte Consulting (Pty) Ltd.1,0*U#Thawte Personal Freemail Issuing CA0 040305211228Z 050305211228Z0D1 0 UThawte Freemail Member1!0 *H anton@nikiforov.ru0"0 *H 0 >qNv`"9 &:Bf*Ku;,h&Pt5 -BCIZ(\X"{)Ûf<WWPUg |1X{-B֟3 j@rM@чj I'r ֨ i&ƨMٕY~O9{gRᤳfJ b+e?sxJd/kaVErzG)Kao_B\E![u]ż_{ސץ /0-0 U 0anton@nikiforov.ru0 U 0 0 *H p1zaGK,U-r%#&CTJ`Q'Xx:GQ. LD/E4;T.9iӁ> dgXq=uXn9b4[Dy<( -]>T0#-0?0 0 *H 01 0 UZA10U Western Cape10U Cape Town10U Thawte Consulting1(0&U Certification Services Division1$0"UThawte Personal Freemail CA1+0) *H personal-freemail@thawte.com0 030717000000Z 130716235959Z0b1 0 UZA1%0#U Thawte Consulting (Pty) Ltd.1,0*U#Thawte Personal Freemail Issuing CA00 *H 0 Ħ<UsUNʙZ hup [v :aQP 0cZ,p+Z?qV˯< 6$*+w=+>@dקe*TH<a@ dr` 00U 0 0CU <0:08642http://crl.thawte.com/ThawtePersonalFreemailCA.crl0 U 0)U "0 0 10UPrivateLabel2-1380 *H HP . fgCL!6 -6/ P p<ab:~ t%Pb'qW%ݩ9 Oe_N4[5MwV!x!5$ F]_eO1;070i0b1 0 UZA1%0#U Thawte Consulting (Pty) Ltd.1,0*U#Thawte Personal Freemail Issuing CA 0 + 0 *H 1 *H 0 *H 1 041103094252Z0# *H 1< qzw$H0R *H 1E0C0 *H 0*H 0 *H @0+0 *H (0x +71k0i0b1 0 UZA1%0#U Thawte Consulting (Pty) Ltd.1,0*U#Thawte Personal Freemail Issuing CA 0z *H 1ki0b1 0 UZA1%0#U Thawte Consulting (Pty) Ltd.1,0*U#Thawte Personal Freemail Issuing CA 0 *H JshBLd=qДowdWa ="-Qw2M\.zIz`-ڰLLwK?^LSCBp t#Uݪ 6zA;#4UiXMEyszjvp_3V:C2d^If;nrWd$H?t#V coUYo *hS綛:$YOp8ApDmY a6B(B5:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4188A81C.3030904>