Date: Sun, 25 Jun 2006 20:04:09 -0400 From: Anthony Agelastos <iqgrande@gmail.com> To: John Nielsen <john@jnielsen.net> Cc: asa@agava.com, freebsd-questions@freebsd.org Subject: Re: CUPS, USB printers & "Permission Denied" Message-ID: <0092EAFD-5911-49DA-846E-99BB33D0C0C7@gmail.com> In-Reply-To: <200606251935.14267.john@jnielsen.net> References: <8a6250b20606251628g5ea35843r5ccb318b15876609@mail.gmail.com> <200606251935.14267.john@jnielsen.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jun 25, 2006, at 7:35 PM, John Nielsen wrote: > On Sunday 25 June 2006 19:28, Anthony Agelastos wrote: >> I updated CUPS and I cannot print to my USB laser printer. The web >> interface shows the following: >> >> hp_LaserJet_1160Le (Default Printer) "Unable to open USB device >> "usb:/dev/ulpt0": Permission denied" >> Description: Hewlett-Packard LaserJet 1160Le >> Location: Den >> Make and Model: HP LaserJet 1160 Foomatic/hpijs (recommended) >> Printer State: stopped, accepting jobs, published. >> Device URI: usb:/dev/ulpt0 >> >> Doing a `dmesg | grep ulpt0`, I get >> >> ulpt0: Hewlett-Packard hp LaserJet 1160 series, rev 1.10/1.00, >> addr 2, >> iclass 7/1 >> ulpt0: using bi-directional mode >> >> The printer itself works (I plugged it directly into my MacBook >> and it >> printed fine). To ensure it wasn't an awkward build error, I issued a >> >> `portupgrade -fR cups` >> >> and rebuilt it and everything it is dependent upon. Does anyone >> else have >> any ideas? I am running an early 6.1-STABLE (FreeBSD dell.home.iq >> 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat May 13 01:04:32 EDT 2006 >> root@dell.home.iq:/usr/obj/usr/src/sys/IQKERNEL i386). > > Just a "me too" so far with an el cheapo Lexmark USB laser printer > (E210). > Are you using the foomatic script? I am, with a PPD from > linuxprinting.org. I am not sure, actually (it was so long ago, I do not remember how I got it working). I installed hpijs and "Make and Model" mentions Foomatic/hpijs, so perhaps. I am sorry I could not be of more assistance with this question. > > I'm going to try backing up and blowing away my etc/cups dir, re- > updating > the port, reinstalling foomatic and my ppd, and see if that makes any > difference. I'll post whatever I learn. Thank you for posting your findings and for your quick reply. > > JN
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0092EAFD-5911-49DA-846E-99BB33D0C0C7>