Date: Wed, 28 Apr 2010 08:02:26 -0400 From: John Baldwin <jhb@freebsd.org> To: freebsd-stable@freebsd.org Cc: kama <kama@pvp.se> Subject: Re: HP 380 G4 - ciss kernel page fault. Message-ID: <201004280802.26267.jhb@freebsd.org> In-Reply-To: <20100428091758.F4522@ns1.as.pvp.se> References: <20100427150736.A4522@ns1.as.pvp.se> <201004271721.34248.jhb@freebsd.org> <20100428091758.F4522@ns1.as.pvp.se>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 28 April 2010 3:22:44 am kama wrote: > > On Tue, 27 Apr 2010, John Baldwin wrote: > > > On Tuesday 27 April 2010 9:30:12 am kama wrote: > > > > > > Hi. > > > > > > I have problem when probing the ciss device. Causing a kernel panic. This > > > happened when I upgraded from 6.3 to 7.3-stable. Booting the old kernel > > > works. So something has changed. I am also getting the error on both the > > > 7.3 and the 8.0 install cd's. > > > > > > The ciss that causing the problem is a Smart Array 6404 and its the addon > > > card that it faults at. The server disconnect it due to an error. But > > > since it works on 6.3 it is something that have changed. FreeBSD should > > > not panic, it should just disable it. > > > > > > Also I tried to disable the card in the BIOS, but FreeBSD try to probe it > > > anyway and panic. > > > > > > This whats comes up on a verbose boot through the ILO remote console. > > > (typed in manually from a screenshot) > > > > > > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > > > 0xfdf70000-0xfdf71fff irq 98 at device 5.0 on pcill > > > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > > > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an > > > ioport > > > ciss2: can't allocate config window > > > kernel trap 12 with interupts disabled > > > > Can you get the ciss2 boot messages from a working 6.x kernel? > > This is the verbose boot on 6.3. > > FreeBSD 6.3-STABLE #3: Thu Mar 6 14:29:33 CET 2008 > > ciss1: 10 physical devices > ciss1: 4 logical drives > ciss1: logical drive (b0t0): RAID 1, 69120MB online > ciss1: logical drive (b0t1): RAID 1, 69120MB online > ciss1: logical drive (b0t2): RAID 1, 139776MB online > ciss1: logical drive (b0t3): RAID 1, 139776MB online > > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > 0xfdf70000-0xfdf71fff,0xfdf00000-0xfdf3ffff irq 98 at device 5.0 on pci11 > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an > ioport > ciss2: can't allocate config window > device_attach: ciss2 attach returned 6 Oh, so it didn't work in 6.x either, it just handles failure less gracefully in 7.0+? -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201004280802.26267.jhb>