Date: Fri, 02 Mar 2012 07:31:21 -0500 From: sean <tech.junk@myfairpoint.net> To: freebsd-questions@freebsd.org Subject: Re: USB Logitech QuickCam Ultra Vision Message-ID: <4F50BD99.7090509@myfairpoint.net> In-Reply-To: <20120302060453.GA3506@tinyCurrent> References: <4F4FDB25.5020400@myfairpoint.net> <4F50139F.6050203@herveybayaustralia.com.au> <20120302054811.a72c89c8.dcdowse@gmx.net> <20120302060453.GA3506@tinyCurrent>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/02/12 01:04, Matthias Apitz wrote: > El día Friday, March 02, 2012 a las 05:48:11AM +0100, Daniel C. Dowse escribió: > >> Hi, >> >> usbconfig -d ugenX.Y do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 0x00 >> usbconfig -d ugenX.Y reset >> usbconfig -d ugenX.Y do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 0x00 >> >> and then restart webcamd. >> >> may help, it worked on my Logitech Business Pro Cam >> >> cheers > FWHIW, such quirks are also shown in http://wiki.freebsd.org/WebcamCompat > and once your webcam is working fine it could show up there too; > > HIH > > matthias I have been using that page for help. I just entered lsusb and the Quickcam Ultra reports different numbers alongside ugen then what is show reviewing dmesg or cat /dev/sndstat. Is this the problem, the assigned numbers don't match? If I run the usbconfig command with 4.2 instead of 1.0 at least I do not get the can't be found or does not exist reply. Instead I get a generic "REQUEST = <ERROR>" message. My camera is also not listed on that site. tardis# whoami root tardis# lsusb Bus /dev/usb Device /dev/ugen2.5: ID 050d:016a Belkin Components Bluetooth Mini Dongle Bus /dev/usb Device /dev/ugen2.4: ID 0a5c:4503 Broadcom Corp. Bus /dev/usb Device /dev/ugen2.3: ID 0a5c:4502 Broadcom Corp. Bus /dev/usb Device /dev/ugen1.4: ID 047d:2048 Kensington Bus /dev/usb Device /dev/ugen4.2: ID 046d:08c9 Logitech, Inc. QuickCam Ultra Vision Bus /dev/usb Device /dev/ugen2.2: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus /dev/usb Device /dev/ugen1.3: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard Bus /dev/usb Device /dev/ugen1.2: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus /dev/usb Device /dev/ugen4.1: ID 0000:0000 Bus /dev/usb Device /dev/ugen3.1: ID 0000:0000 Bus /dev/usb Device /dev/ugen2.1: ID 0000:0000 Bus /dev/usb Device /dev/ugen1.1: ID 0000:0000 Bus /dev/usb Device /dev/ugen0.1: ID 0000:0000 tardis# usbconfig -d ugen4.2 do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 0x00 REQUEST = <ERROR> tardis# usbconfig -d ugen4.2 do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 0x00 REQUEST = <ERROR> tardis# dmesg | grep pcm pcm0: <AMD-8111> port 0xc800-0xc8ff,0xcc00-0xcc3f irq 17 at device 7.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> pcm1: <USB audio> on uaudio0 tardis# cat /dev/sndstat FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64) Installed devices: pcm0: <AMD-8111> (play/rec) default pcm1: <USB audio> (rec) tardis#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F50BD99.7090509>