Date: Mon, 14 Oct 2013 19:26:57 +0200 From: Juergen Lock <nox@jelal.kn-bremen.de> To: Milan Obuch <freebsd-multimedia@dino.sk> Cc: freebsd-multimedia@freebsd.org, Juergen Lock <nox@jelal.kn-bremen.de> Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131014172657.GA67855@enceladus10.kn-bremen.de> In-Reply-To: <20131007200723.03d72d72@wind.dino.sk> References: <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> <20131006174241.4d8ac3f5@wind.dino.sk> <20131006183352.GA6317@enceladus10.kn-bremen.de> <20131007092535.2465d875@wind.dino.sk> <20131007164138.GA49120@enceladus10.kn-bremen.de> <20131007200723.03d72d72@wind.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Oct 07, 2013 at 08:07:23PM +0200, Milan Obuch wrote: > On Mon, 7 Oct 2013 18:41:39 +0200 > Juergen Lock <nox@jelal.kn-bremen.de> wrote: > > > On Mon, Oct 07, 2013 at 09:25:35AM +0200, Milan Obuch wrote: > > > On Sun, 6 Oct 2013 20:33:52 +0200 > > > Juergen Lock <nox@jelal.kn-bremen.de> wrote: > > > > > > > On Sun, Oct 06, 2013 at 05:42:41PM +0200, Milan Obuch wrote: > > > > > > > [ snip ] > > > > > > I would expect it should be configured this plugin in > > > > > vdr_flags... > > > > > > > > Yep. > > > > > > > > > Also, what about femon plugin? How should it be used? > > > > > > > > > It shuold put an entry in the vdr osd main menu, just select > > > > that. BER and UNC (if available) readings for the currently > > > > playing channel will be shown in the top display. > > > > > > > > > > Do you mean pressing Tab? Here I see Devices column at the right > > > side. Is that displaying it? > > > > > Pressing tab and then selecting "Signal Information" via cursor down > > and then pressing OK. (return) > > > > Or if there is a digit before a main menu entry you can also press > > that. > > > > I found it and now grasp the menu concept... > > > > > > On https://wiki.freebsd.org/VDR, there is some menu mentioned. > > > > > When I use vdr-sxfe, there is no menu. Where is menu mentioned > > > > > on wiki located and how could it be accessed? > > > > > > > > If you use the default /usr/local/etc/vdr/remote.conf installed > > > > by the vdr-plugin-xineliboutput port (you can look at that file!) > > > > then the menu is on the tab and insert keys in the vdr-sxfe (or > > > > softhddevice) osd. > > > > > > > > > > Ahh, finally figured that out! It happened I did not test pressing > > > Tab key until now in vdr-sxfe... Anyway, thanks for pointing to the > > > config file, I understand it now much better. It was just some > > > blind testing before... > > > > > > > > This is not clear at all from what's written there... > > > > > > > > > Hmm... > > > > > > > > > > Or I was just blind looking here, but surely putting on this page > > > something like short paragraph 'Accessing OSD menu - You should > > > press Tab key' would make it clear. In my eyes this is a key > > > information and should be properly highlighted here. Even if it > > > seems now a bit overkill, it would saved me a bit of headache :) > > > > > Hm actually I see I already have this, that's not enough? Quote: > > > > `I have put the menu button on the tab and insert keys and OK on the > > return key, see > > > > /usr/local/etc/vdr/remote.conf > > > > for the full keybindings list.' > > > > (Under: `Controlling the OSD: Keyboard (not for XBMC-PVR)'.) > > > > You are right, I was blind, somehow. What I suggest, now, after > re-reading a bit what's there, is some formatting change. Whole > 'Controlling the OSD: Keyboard' part is one bullet under one paragraph. > Just some indented file names, command examples etc. Maybe that's > actually reason I did not find it at the first glance. > > As accessing menu (using tab or ins key) is the most important > information in this paragraph, it should have been properly > highlighted. That's all. > I now made it its own paragraph, hope the next guy will find it easier than you. :) > [ snip ] > > Thanks for all the work done on VDR, it's really appreciated. > > Regards, > Milan You're welcome! Juergen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131014172657.GA67855>