Date: Thu, 22 Jan 2015 12:00:14 +0100 From: =?UTF-8?B?TcOkcms=?= Owen <markowen2206@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: SANE Network Scanner Message-ID: <20150122120014.3f3e6d67@MARC-THINKPAD.queenland> In-Reply-To: <20150121214628.3b42c157@MARC-THINKPAD.queenland>
index | next in thread | previous in thread | raw e-mail
On Wed, 21 Jan 2015 21:46:28 +0100 Märk Owen <markowen2206@gmail.com> wrote: > > > Begin forwarded message: > > Date: Wed, 21 Jan 2015 20:11:54 +0100 > From: Märk Owen <markowen2206@gmail.com> > To: Zsolt Udvari <udvzsolt@gmail.com> > Subject: Re: SANE Network Scanner > > > On Wed, 21 Jan 2015 19:20:06 +0100 > Zsolt Udvari <udvzsolt@gmail.com> wrote: > > > Did you enable your client's IP in saned.conf? > > Check here: > > https://wiki.archlinux.org/index.php/Sane#Network_scanning I've > > done it with RPI, and followed ArchWiki - you don't need inetd. > > > > 2015-01-21 17:51 GMT+01:00 Märk Owen <markowen2206@gmail.com>: > > > > > Hi, > > > > > > I'm trying to share an Epson Perfection 3490 over the network > > > through SANE. I know it is supported because it worked on linux > > > (Debian). The host (FreeBSD 10.1) recognizes it and it seems to > > > work if I invoke this command: > > > > > > scanimage -d snapscan:libusb:/dev/usb:/dev/ugen1.3 --format pnm > > > > /tmp/outfile.pnm > > > > > > The issue is that my clients (all Debian 7 boxes) don't seem to be > > > able to detect the scanner over the network using xsane or the > > > scanimage -L / sane-find-scanner -q commands. > > > > > > Maybe some of you will be able to enlighten me. Here are the > > > content of a few configuration files from the server: > > > > > > /etc/rc.conf > > > inetd_enable="YES" > > > saned_enable="YES" > > > > > > /etc/services > > > sane-port 6566/tcp #SANE > > > > > > /etc/inetd.conf > > > sane-port stream tcp nowait > > > saned /usr/local/sbin/saned saned > > > > > > In /usr/local/etc/sane.d/dll.conf, everything is commented except > > > 'snapscan' as FreeBSD seems to detect the scanner as snapscan and > > > not epson. > > > > > > /usr/local/etc/sane.d/snapscan.conf > > > #------------------------------ General > > > ----------------------------------- > > > > > > # Change to the fully qualified filename of your firmware file, if > > > # firmware upload is needed by the scanner > > > firmware /usr/local/share/sane/snapscan/Esfw52.bin > > > > > > # If not automatically found you may manually specify a device > > > name. > > > > > > # For USB scanners also specify bus=usb, e.g. > > > # /dev/usb/scanner0 bus=usb > > > > > > # For SCSI scanners specify the generic device, e.g. /dev/sg0 on > > > Linux. # /dev/sg0 > > > > > > > > > #--------------------------------------------------------------------------- > > > # No changes should be necessary below this line > > > > > > #--------------------------------------------------------------------------- > > > > > > #-------------------------- SCSI scanners > > > ---------------------------------- # These SCSI devices will be > > > probed automatically scsi AGFA * Scanner > > > scsi COLOR * Scanner > > > scsi Color * Scanner > > > scsi ACERPERI * Scanner > > > > > > #--------------------------- USB scanners > > > ----------------------------------- # These USB devices will be > > > probed automatically # (This will currently work only on Linux) > > > > > > # Benq/Acer/Vuego 310U > > > usb 0x04a5 0x1a20 > > > usb 0x04a5 0x1a26 > > > > > > # Benq/Acer/Vuego 320U > > > usb 0x04a5 0x2022 > > > > > > # Benq/Acer/Vuego 620U / 620UT > > > usb 0x04a5 0x1a2a > > > usb 0x04a5 0x2040 > > > > > > # Benq/Acer/Vuego 640U > > > usb 0x04a5 0x2060 > > > > > > # Benq/Acer/Vuego 640BU > > > usb 0x04a5 0x207e > > > > > > # Benq/Acer/Vuego 640BT > > > usb 0x04a5 0x20be > > > > > > # Benq/Acer/Vuego 1240U > > > usb 0x04a5 0x20c0 > > > > > > # Benq/Acer/Vuego 3300 / 4300 > > > usb 0x04a5 0x20b0 > > > > > > # Benq/Acer/Vuego 4300 > > > usb 0x04a5 0x20de > > > > > > # Benq 5000E / 5000U > > > usb 0x04a5 0x20f8 > > > > > > # Benq 5000 > > > usb 0x04a5 0x20fc > > > > > > # Benq/Acer 5300 > > > usb 0x04a5 0x20fe > > > > > > # Benq 5250C > > > usb 0x04a5 0x2137 > > > > > > # Agfa 1236U > > > usb 0x06bd 0x0002 > > > > > > # Agfa 1212U > > > usb 0x06bd 0x0001 > > > usb 0x06bd 0x2061 > > > > > > # Agfa Snapscan e10 > > > usb 0x06bd 0x2093 > > > > > > # Agfa Snapscan e20 > > > usb 0x06bd 0x2091 > > > > > > # Agfa Snapscan e25 > > > usb 0x06bd 0x2095 > > > > > > # Agfa Snapscan e26 > > > usb 0x06bd 0x2097 > > > > > > # Agfa Snapscan e40 > > > usb 0x06bd 0x208d > > > > > > # Agfa Snapscan e42 > > > usb 0x06bd 0x20ff > > > > > > # Agfa Snapscan e50 > > > usb 0x06bd 0x208f > > > > > > # Agfa Snapscan e52 > > > usb 0x06bd 0x20fd > > > > > > # Epson Perfection 660 > > > usb 0x04b8 0x0114 > > > > > > # Epson Perfection 1670 > > > usb 0x04b8 0x011f > > > > > > # Epson Perfection 2480 > > > usb 0x04b8 0x0121 > > > > > > # Epson Perfection 3490 > > > usb 0x04b8 0x0122 > > > > > > # Epson Stylus CX-1500 > > > usb 0x04b8 0x080c > > > _______________________________________________ > > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to " > > > freebsd-questions-unsubscribe@freebsd.org" > > > > > Yes, I did. Here's my saned.conf: > > # saned.conf > # Configuration for the saned daemon > > ## Daemon options > # Port range for the data connection. Choose a range inside [1024 - > 65535]. # Avoid specifying too large a range, for performance reasons. > # > # ONLY use this if your saned server is sitting behind a firewall. If > your # firewall is a Linux machine, we strongly recommend using the > # Netfilter nf_conntrack_sane connection tracking module instead. > # > # data_portrange = 10000 - 10100 > > > ## Access list > # A list of host names, IP addresses or IP subnets (CIDR notation) > that # are permitted to use local SANE devices. IPv6 addresses must be > enclosed # in brackets, and should always be specified in their > compressed form. # > # The hostname matching is not case-sensitive. > > #scan-client.somedomain.firm > #192.168.0.1 > 192.168.1.0/24 > #[2001:db8:185e::42:12] > #[2001:db8:185e::42:12]/64 > > # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and > # /etc/services must also be properly configured to start > # the saned daemon as documented in saned(8), services(4) > # and inetd.conf(4) (or xinetd.conf(5)). I'm going to answer myself here. I managed to solve my issue, it was in fact a simple permission problem. I changed my /etc/devfs.rules files by replacing 'usb' with 'saned': [system=5] add path 'ugen1.3' mode 0660 group saned add path 'usb/1.3.*' mode 0660 group saned As Zsolt said, I removed the inetd service and simply let SANED share the scanner over the network by itself and it worked. Thanks for the help.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150122120014.3f3e6d67>