Date: Wed, 1 Sep 1999 18:17:11 -0300 (EST) From: Luiz Morte da Costa Junior <morte@correionet.com.br> To: Pete Mckenna <pmckenna@uswest.net> Cc: Kevin Lynn <klynn@santacruz.org>, freebsd-hackers@freebsd.org Subject: Re: L440GX+ Server Board Message-ID: <Pine.BSF.4.10.9909011734370.1034-100000@caxton.correionet.com.br> In-Reply-To: <37CD8C42.7DA0A422@uswest.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Pete and All, On Wed, 1 Sep 1999, Pete Mckenna wrote: > We have a few dozen running mostly as uniprocesser boxes. Ok. My server has 2 processors. I supose that you have some servers with 2 processors. > I have also put an adaptec 2940 in them and it works as well. What is the adaptec transfer rate? I have tested with a adaptec 80Mb, and it didn't work too. The chipset is the same the AIC 7896. > You need to run 3.2 or better to get the drivers for the on board > Adaptec. I have downloaded (with CVSup) to stable version, but I have the same problem. I have about 10.000 users in my master.passwd. When I runnig the vipw, my machine stay down (I can't send any e-mail, when I have the problem). Another test that I have done with my kernel was to put the flags below: controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 flags 0xb0ff disk wd1 at wdc0 drive 1 flags 0xb0ff controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 flags 0xb0ff disk wd3 at wdc1 drive 1 flags 0xb0ff It didn't work too. > The onboard NIC works like any other Intel 10/100 using fxp0, adding a > asecond nic makes the onboard fxp1 (for failover purposes, I assume) I think that I don't have problem with my NIC (Intel 10/100). > We like them, and are trying to get Intel to make the reporting of temp > etc and power managment Unix friendly. You can get to the bios at boot > time (remotely via a com port) as it is which is nice. I can't figured out what you want to say about BIOS :/ Thanks in advance. []s, Luiz Morte da Costa Junior Analista de Redes E-mail: morte@correionet.com.br Telefone: +55 19 754-2532 Fax: +55 19 255-7576 CorreioNet - Correio Popular Campinas - SP - Brazil > Pete > > Kevin Lynn wrote: > > > > Has anyone else gotten this server board to work? > > > > I've got an N440BX and have been considering getting the L440GX+ but > > haven't because I don't know if it works.. > > > > Kevin > > > > On Mon, 23 Aug 1999, Luiz Morte da Costa Junior wrote: > > > > > > > > Hi list, > > > > > > About the problem bellow, I bought a 2940 Adaptec Ultra2 Wide SCSI > > > controller, but it didn't work too. > > > > > > I wrote to Justin T. Gibbs and he told me that my problem is not SCSI. > > > > > > Somebody has any idea? > > > > > > []s, > > > > > > Luiz Morte da Costa Junior > > > Analista de Redes E-mail: morte@correionet.com.br > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > > > CorreioNet - Correio Popular Campinas - SP - Brazil > > > > > > > > > On Sun, 22 Aug 1999, Luiz Morte da Costa Junior wrote: > > > > > > > > > > > Hi all, > > > > > > > > I have a problem with a server running a FreeBSD 3.2. > > > > > > > > My Server has a L440GX+ Serber Board (intel), with network card 10/100, > > > > SCSI AIC 7896 (80MB/s), 2 SCSI disk with 9GB (80MB/s), 2 pentium III > > > > 450Mhz (not overclocked). The NIC and SCSI are onboard. > > > > > > > > I recompiled a kernel to SMP, and it worked. The server is ok, but when I > > > > run a comand with disk access (whith vipw or mysql), the performance of > > > > server goes down. My server stays very very very slow. If I use pine to > > > > read my messages, it doesn't work. When the comand finishes, the server > > > > stays "ok" again. > > > > > > > > I recompiled the kernel with "maxusers 128", but it doesn't work. > > > > > > > > My SCSI cable has a terminator and the scsi setup is ok (I think :) ). > > > > > > > > The dmesg command output is in attchmnt. > > > > > > > > I appreciate any help. > > > > > > > > []s, > > > > > > > > Luiz Morte da Costa Junior > > > > Analista de Redes E-mail: morte@correionet.com.br > > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > > > > CorreioNet - Correio Popular Campinas - SP - Brazil > > > > > > > > > > []s, > > > > > > Luiz Morte da Costa Junior > > > Analista de Redes E-mail: morte@correionet.com.br > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576 > > > CorreioNet - Correio Popular Campinas - SP - Brazil > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-hackers" in the body of the message > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-hackers" in the body of the message > []s, Luiz Morte da Costa Junior Analista de Redes E-mail: morte@correionet.com.br Telefone: +55 19 754-2532 Fax: +55 19 255-7576 CorreioNet - Correio Popular Campinas - SP - Brazil To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909011734370.1034-100000>