Date: Tue, 29 Aug 2000 23:01:39 +0100 From: Ian J Greely <Ian@tirnanog.org> To: freebsd-mobile@freebsd.org Subject: Re: Enable PCCard support Message-ID: <cacoqsk0jp40mg24e5o51f78997bs96i2c@4ax.com> In-Reply-To: <39AC2F69.187D0568@peregrine.com> References: <if6oqsgb3iqi7h382b7i9bqcc9vcjch9ep@4ax.com> <39AC2F69.187D0568@peregrine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The card in the machine is a DLink DE660. But it's not getting that far. If I do a pccardc dumpcis it tells me that there are no slots... I have put a 98 config on a different partition and it's able to use the network card without problem so I'm relatively sure that the controller is ok. My kernel has the following entry device card device pcic0 at isa? the following message at boot up had me remove the card devices from /dev and remake them... pccardc: /dev/card0: Device not configured pccardc: /dev/card0: Device not configured And the lines you suggest are in my rc.conf. I'm unsure where else to go with this... regards Ian On Tue, 29 Aug 2000 14:47:21 -0700, you wrote: >What kind of PCCard is it? > >Do you have lines in your /etc/rc.conf along the lines of .. > >pccard_enable=3D"YES" >pccard_ifconfig=3D"inet x.y.z.t netmask 255.255.255.0" > >? > >Eric Hedstrom >erich@peregrine.com > >Ian J Greely a =E9crit : >>=20 >> Hi, >>=20 >> I'm trying to get a spare laptop I have up and working as a firewall >> internet connection machine. The unit has no floppy or CD (rather well >> used old unit). >>=20 >> I've installed 4.1 onto it using a different machine and then moved >> the Hard disc into the target machine. >>=20 >> It's all worked fine except that I am now unable to get any sort of a >> response from PCCard >>=20 >> dmesg shows the following... >>=20 >> atapci0: Busmastering DMA not configured >> ata0: at 0x1f0 irq 14 on atapci0 >> pcic-pci0: <Cirrus Logic PD6729.6730 PC-Card Controller> port >> 0xfcfc-0xfcff at device 19.0 on pci0 >> <lots more unrelated stuff> >>=20 >> Towards the end of the boot I get two /dev/card0 not configured : >> messages. >>=20 >> On the advice of a friend I've added the following to the loader.conf >>=20 >> /boot/loader.conf: >>=20 >> machdep.pccard.pcic_irq=3D"0" >>=20 >> Anyone got any suggestions on how I might attempt to get this sucker >> running? >>=20 >> regards, >> Ian >>=20 >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-mobile" in the body of the message > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cacoqsk0jp40mg24e5o51f78997bs96i2c>