Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 28 Nov 2002 12:00:15 +0100
From:      Bernd Walter <ticso@cicely8.cicely.de>
To:        Terry Lambert <tlambert2@mindspring.com>
Cc:        Sten <sten@blinkenlights.nl>, Christian Weisgerber <naddy@mips.inka.de>, freebsd-alpha@FreeBSD.ORG
Subject:   Re: PC133 memory in an 164SX?
Message-ID:  <20021128110015.GJ35855@cicely8.cicely.de>
In-Reply-To: <3DE53296.6FE3B592@mindspring.com>
References:  <arlui2$25u$1@kemoauc.mips.inka.de> <Pine.GSO.4.44-Blink.0211231348410.22117-100000@thea.blinkenlights.nl> <as2pal$i4a$2@kemoauc.mips.inka.de> <Pine.SOL.4.50.0211272020140.19206-100000@thea.blinkenlights.nl> <3DE52BB1.6C784A51@mindspring.com> <Pine.SOL.4.50.0211272142360.19206-100000@thea.blinkenlights.nl> <3DE53296.6FE3B592@mindspring.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Nov 27, 2002 at 01:01:10PM -0800, Terry Lambert wrote:
> Sten wrote:
> > On Wed, 27 Nov 2002, Terry Lambert wrote:
> > > I have found that with certain chipsets, DIMMs with tin contacts
> > > work, but DIMMs with gold contacts do not.
> > 
> > I don't think I have seen many/any dimm's with tin contacts.
> > Simm's is a quite different story.
> 
> I bought my Alpha memory from IBM, based on it being intended
> for a PS/2 machine (I think).  YMMV, of course.
> 
> I understand that these days, it's hard to get anyhing that
> doesn't have gold-plated contacts, but that doesn't make the
> statement less true (sorry).

Which is bad, because most boards only have tin contacts on their
sockets.
But this is a different story.
Wrong contacts can cause you more failures over time.

One Point is that my Hardware Reference Manual shows a maximum of
512M memory (4x 16Mx72).
Christian tried modules with doubled size.
Another Point is that especially SDRAM can come in different
organisations which are not transparent to the system chipsset and
system initialisation software.
It is possible, that SRM or the hardware just can't handle the
organisation of the modules in question - especially as the board was
not designed to use modules of that size.

-- 
B.Walter              COSMO-Project         http://www.cosmo-project.de
ticso@cicely.de         Usergroup           info@cosmo-project.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021128110015.GJ35855>