Date: Mon, 29 Dec 2003 04:41:46 -0800 (PST) From: Edwin Culp <edwinlculp@yahoo.com> To: Jamie Clark <jclark@metaparadigm.com>, current@freebsd.org Subject: Re: SATA disks on 5.2-CURRENT Message-ID: <20031229124146.54407.qmail@web13006.mail.yahoo.com> In-Reply-To: <3FEF882E.6080800@metaparadigm.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--- Jamie Clark <jclark@metaparadigm.com> wrote: > Tatsumi Hosokawa wrote: > > >atapci2@pci0:31:2: class=0x01018f > card=0x24d11458 chip=0x24d18086 rev=0x02 > >hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB (ICH5) SATA Controller' > > class = mass storage > > subclass = ATA > > > >Disks sometimes work, and sometimes don't work, and > sometimes the > >system hangs in boot process (these disks work fine > on 4.9-RELEASE). > > > > > FWIW (if a 'me too' is worth anything) I have > exactly the same problem > with my Intel 865PERL mainboard. Same error messages > as below, almost > always hangs on boot. Last tested with -CURRENT > around 26 Dec. > My reason for using the SATA channels was because I > had already fully > populated PATA - so using legacy mode was not an > option. The SATA did > work ok in Windows. > > Solution was found in a 3ware controller. I would like to interpret the above. Does this mean that the 8500 series of SATA controlers from 3ware work under current as is? Thanks, ed > > I'd be happy to re-connect and collect some further > verbose messages if > anyone's interested. > > -Jamie > > >Error messages: > > > > Case 1: > > Dec 7 21:52:02 nekodaisuki kernel: ad4: FAILURE > - READ_DMA status=51<READY,DSC,ERROR> > error=40<UNCORRECTABLE> > > Dec 7 21:52:02 nekodaisuki kernel: ad6: FAILURE > - READ_DMA status=51<READY,DSC,ERROR> > error=10<NID_NOT_FOUND> > > > > Case 2: > > Dec 8 00:27:48 nekodaisuki kernel: ad4: WARNING > - READ_DMA recovered from missing interrupt > > Dec 8 00:27:48 nekodaisuki kernel: ad4: FAILURE > - READ_DMA > status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> > error=0 > > Dec 8 00:27:48 nekodaisuki kernel: ad4: timeout > sending command=c8 > > Dec 8 00:27:48 nekodaisuki kernel: ad4: error > issuing DMA command > > Dec 8 00:27:48 nekodaisuki kernel: ad4: WARNING > - READ_DMA recovered from missing interrupt > > Dec 8 00:27:48 nekodaisuki kernel: ad4: FAILURE > - READ_DMA > status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> > error=0 > > > > > > > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031229124146.54407.qmail>