Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 01 Jun 2004 12:21:44 +1200
From:      Drew Broadley <drew@corrupt.co.nz>
To:        current@freebsd.org
Subject:   Re: ndis - NetGear HA501 - kernel panic
Message-ID:  <40BBCC18.70000@corrupt.co.nz>
In-Reply-To: <40BAF4EC.6080207@corrupt.co.nz>
References:  <40BAF4EC.6080207@corrupt.co.nz>

next in thread | previous in thread | raw e-mail | index | archive | help
Bump.

Drew Broadley wrote:

> This is what comes up when I  use the XP and 2k drivers for the 
> NetGear HA501 802.11a card and insert:
> >>>>>>>>>>>>>>>>>>>
> ndis0: <NETGEAR HA501 Wireless Adapter> mem 0x80000000-0x8000ffff irq 
> 11 at device 0.0 on cardbus0
> ndis0: [GIANT-LOCKED]
> >>>>>>>>>>>>>>>>>>>
>
> This is when I perform "ifconfig ndis0 up SSID GUYAVE"
> >>>>>>>>>>>>>>>>>>>
> can't re-use a leaf (MapRegisters)!
> can't re-use a leaf (clist)!
> can't re-use a leaf (QoS)!
> can't re-use a leaf (tpc)!
> can't re-use a leaf (TurboEnable)!
> can't re-use a leaf (beaconInterval)!
> can't re-use a leaf (bssType)!
> can't re-use a leaf (privacyInvoked)!
> can't re-use a leaf (sleepMode)!
> can't re-use a leaf (FragThreshold)!
> can't re-use a leaf (RTSThreshold)!
> can't re-use a leaf (rateCtrlEnable)!
> can't re-use a leaf (SmeEnable)!
> can't re-use a leaf (TransmitRate)!
> can't re-use a leaf (bkScanEnable)!
> ndis0: NDIS API version: 5.0
> ndis0: Ethernet address: 00:30:ab:15:b6:cf
> ndis0: 11a rates:
> ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ndis0: set filter failed: 6
> ndis0: set filter failed: 6
> ndis0: set filter failed: 6
> ndis0: link up
> ndis0: no matching rate for: 48
> >>>>>>>>>>>>>>>>>>>
>
> This is when I perform "ifconfig ndis0 down"
> >>>>>>>>>>>>>>>>>>>
> Fatal trap 12: page fault while in kernel mode
> fault virtual address   = 0xb85b58
> fault code              = supervisor read, page not present
> instruction pointer     = 0x8:0xc07cbdf0
> stack pointer           = 0x10:0xe7f30a9c
> frame pointer           = 0x10:0xe7f30aac
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                        = DPL 0, pres 1, def32 1, gran 1
> processor eflags        = interrupt enabled, resume, IOPL = 0
> current process         = 792 (ifconfig)
> trap number             = 12
> panic: page fault
> at line 815 in file /usr/src/sys/i386/i386/trap.c
> >>>>>>>>>>>>>>>>>>>
>
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to 
> "freebsd-current-unsubscribe@freebsd.org"
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40BBCC18.70000>