Date: Tue, 21 Mar 2006 09:59:05 -0500 (EST) From: jason kawaja <kawaja@ece.ufl.edu> To: freebsd-scsi@freebsd.org Subject: Re: qlogic isp 6312 device not showing up Message-ID: <Pine.BSF.4.62.0603210924180.17308@felix.ece.ufl.edu> In-Reply-To: <44200030.9090400@centtech.com> References: <Pine.BSF.4.62.0603210739370.17308@felix.ece.ufl.edu> <44200030.9090400@centtech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 21 Mar 2006, Eric Anderson wrote: > jason kawaja wrote: >> ibm xseries 346, dual xeon dual core with qlogic fc card. >> >> external disk device shows up within the qlogic bios (once wwid is >> correctly added to the disk array manager,ibm shark) however does not >> show from within freebsd. any ideas? information below. thank you. >> >> isp0: <Qlogic ISP 6312 PCI FC-AL Adapter> port 0x4000-0x40ff mem >> 0xdefff000-0xdeffffff irq 96 at device 4.0 on pci4 >> isp0: [GIANT-LOCKED] >> isp0: bad hard address 125- resetting to zero > > I'm guessing the "bad hard address 125" is the problem. Sounds like > you manually set a hard address in the BIOS - is that necessary for > your configuration? it is not set manually, defaults are set. is 125- a truncated number? could a malformatted partition (on the fc disk device) cause this behavior? -- Jason Kawaja 2-4568 http://www.ietf.org/rfc/rfc1855.txt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.62.0603210924180.17308>