Date: Thu, 11 Jan 2007 02:25:54 +0800 From: "Mars G. Miro" <marsgmiro@gmail.com> To: "Bruce A. Mah" <bmah@freebsd.org>, "LI Xin" <delphij@delphij.net>, freebsd-stable@freebsd.org Subject: Re: Marvell 8053 support? Message-ID: <28edec3c0701101025p1983c89byc11ed3e4ec4fe9d7@mail.gmail.com> In-Reply-To: <45A3C0F2.9080909@freebsd.org> References: <28edec3c0701090319i2d4f90d1kcc38bd5b02fd6ff7@mail.gmail.com> <45A385EC.6030404@delphij.net> <28edec3c0701090758l24c32e48m3375cc34a03529be@mail.gmail.com> <45A3BD36.1060707@delphij.net> <45A3C0F2.9080909@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1/10/07, Bruce A. Mah <bmah@freebsd.org> wrote: > If memory serves me right, LI Xin wrote: > > > Not sure if the snapshot contained the changes, though... IIRC the > > January snapshot is not released yet? > > The January CURRENT snapshots are being built and uploaded now. The > mirrors might have some of the architectures, but an announcement will > come only after everything's been uploaded (and had a little while to > propagate). > I just booted the january/amd64 snapshot ISO and it detects it fine: ++++++++++++++++++++++++ pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x9000-0x9fff pcib3: memory decode 0xf9000000-0xfaffffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 found-> vendor=0x11ab, dev=0x4362, revid=0x22 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8053 Gigabit Ethernet Controller PN: Yukon 88E8053 EC: Rev. 2.2 MN: Marvell SN: AbCdEfG83CD03 CP: id 1, BAR16, off 0x3cc RV: 0x6c MSI supports 2 messages, 64 bit map[10]: type 1, range 64, base 0xfa000000, size 14, enabled pcib3: requested memory range 0xfa000000-0xfa003fff: good map[18]: type 4, range 32, base 0x9000, size 8, enabled pcib3: requested I/O range 0x9000-0x90ff: in range pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0x9000-0x90ff mem 0xfa000000-0xfa003fff irq 16 at device 0.0 on pci3 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfa000000 mskc0: MSI count : 2 mskc0: attempting to allocate 2 MSI vectors (2 supported) mskc0: using IRQs 258259 for MSI mskc0: RAM buffer size : 48KB mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:16:e6:83:cd:03 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [MPSAFE] mskc0: [FAST] +++++++++++++++ Thanks. > Bruce. > > > cheers mars
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?28edec3c0701101025p1983c89byc11ed3e4ec4fe9d7>