Date: Sat, 26 Sep 2009 23:12:54 +0800 From: Rohit Grover <rgrover1@gmail.com> To: Joe Marcus Clarke <marcus@marcuscom.com>, freebsd-current@freebsd.org Subject: Re: hald spins in a poll/read loop against /dev/usb with CURRENT Message-ID: <426bed110909260812sdba0fa8v2be21ab9a9b64332@mail.gmail.com> In-Reply-To: <4ABD96EF.8060401@FreeBSD.org> References: <426bed110909250623j44c25ba8o97ded8393f5297a9@mail.gmail.com> <20090925153212.67247375@ernst.jennejohn.org> <426bed110909251459p50ca5564mee568e14bd26d8cd@mail.gmail.com> <1253916251.1274.25.camel@shumai.marcuscom.com> <4ABD96EF.8060401@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I've updated to 8.0-RC1 using buildworld, buildkernel.. and rebuilt hald against the new sources. Hald appears to now. Thanks a lot for helping. On Sat, Sep 26, 2009 at 12:22 PM, Doug Barton <dougb@freebsd.org> wrote: > Joe Marcus Clarke wrote: >> Insufficient. =A0You need to be running on a world/kernel which are in >> sync with each other. =A0You also need to make sure the libusb port is n= o >> longer installed, and that you have run "make delete-old" after the >> upgrade. =A0Then rebuild hal. > > Would it be possible to set something based on OSVERSION so that if > libusb is installed it fails with a useful message? I think this > problem is only going to become more prevalent. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?426bed110909260812sdba0fa8v2be21ab9a9b64332>