Date: Mon, 28 Nov 2011 01:22:47 +0330 From: Mostaf Faridi <mostafafaridi@gmail.com> To: Fatal Error <jinhitman@gmail.com> Cc: freebsd-pf@freebsd.org Subject: Re: one ADSL connection with 10 static IPs and PF Message-ID: <CAPCZ5JgJooWdrEyzwDbhOSnFVFWSVGXKK933SzeXLDdFLHY=eA@mail.gmail.com> In-Reply-To: <4ED2735A.5020406@gmail.com> References: <4ED19ADF.90409@gmail.com> <4ED2735A.5020406@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks all, So I must choose PPoe, for this problem, but what I must do when I want use all ten static IPs? On Nov 27, 2011 9:28 PM, "Fatal Error" <jinhitman@gmail.com> wrote: > On 11/27/2011 04:05 AM, Gholam Mostafa Faridi wrote: > >> we had Leased line before and we had 27 static IPs before , but our ISP >> do not support is very well , and we change our ISP and we buy ADSL >> connection with 10 static IPs , my NAT Server is OpenBSD 5 , and I will >> change it FreeBSD 8.2 . >> Can I do this with FreeBSD 8.2 and PF ? Do I have to add some options in >> Kernel or no ? >> before we change our connection type from Leased line to ADSL , we have >> cisco 800 router and Leased line connect to cisco 800 and after that we >> connect it to our NAT server , every thing was good and it work like charm >> , but after change connection type , ISP give us Zyxcel ADSL modem with 10 >> startic IP , and our IPS do not say what we must do with this ADSL modem >> and these IPs. >> we do not know , which mode we must use in ADSL modem , PPoE or bridge ? >> we do not know use PPoE or Bridge mode with ADSL modem and our ISP do not >> give us enough information , if I want make NAT server with PF with mode I >> must set in ADSL modem ? PPoE or bridge ? >> we do not know how we must config our NAT server , >> we do not know we need ppp or no ? >> we do not konw how we must config PF . >> we have to use 10 static IPs and we can not use one static IP , because >> of our policy . >> which options , I must add to my PF.conf >> ______________________________**_________________ >> freebsd-pf@freebsd.org mailing list >> http://lists.freebsd.org/**mailman/listinfo/freebsd-pf<http://lists.freebsd.org/mailman/listinfo/freebsd-pf>; >> To unsubscribe, send any mail to "freebsd-pf-unsubscribe@**freebsd.org<freebsd-pf-unsubscribe@freebsd.org> >> " >> > Hi. > I had same problem with Zyxcel Brand Adsl Modem two weeks ago. I did not > find true options how to use bridge mode option with PPPoE Protocol on > Zyxcel P-600 with same time and together. Because the Zyxel P-600 doesn't > support Bridge Mode Option on PPPoE. Than I choosed PPPoE. At least this > time I have a reliable Adsl connection. You have two option. > -Change adsl modem another one which support PPPoE and Bridge Mode Options > on the same time (and together). This option is easy and preferably. > -Choose the PPPoE mode. Make more than one virtual interfaces on the > OpenBSD, and write your own rules for nat. If you need to further > information about virtual interfaces, fallow below link. > http://www.openbsd.org/faq/**faq6.html#Setup.aliases<http://www.openbsd.org/faq/faq6.html#Setup.aliases>; > ______________________________**_________________ > freebsd-pf@freebsd.org mailing list > http://lists.freebsd.org/**mailman/listinfo/freebsd-pf<http://lists.freebsd.org/mailman/listinfo/freebsd-pf>; > To unsubscribe, send any mail to "freebsd-pf-unsubscribe@**freebsd.org<freebsd-pf-unsubscribe@freebsd.org> > " >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPCZ5JgJooWdrEyzwDbhOSnFVFWSVGXKK933SzeXLDdFLHY=eA>