Date: Thu, 10 May 2012 09:00:31 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Mike Tancsa <mike@sentex.net> Cc: freebsd-hackers@freebsd.org, Hans Petter Selasky <hselasky@c2i.net> Subject: Re: PCEngines alix.6 with dual SIM Message-ID: <E1SSMQR-0005Lf-LU@kabab.cs.huji.ac.il> In-Reply-To: <4FAA86B0.4070202@sentex.net> References: <E1SS89T-000H1R-W1@kabab.cs.huji.ac.il> <4FAA86B0.4070202@sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 5/9/2012 10:46 AM, Daniel Braniss wrote: > > Hi, > > after a long time, I finaly got around trying to get the GSM/UMTS working, > > but so far it thinks it's a mass storage! > > > > ugen0.2: <USB MMC Storage Sierra Wireless> at usbus0, cfg=0 md=HOST spd=FULL > > (12Mbps) pwr=ON > > > > bLength = 0x0012 > > bDescriptorType = 0x0001 > > bcdUSB = 0x0110 > > bDeviceClass = 0x0000 > > bDeviceSubClass = 0x0000 > > bDeviceProtocol = 0x0000 > > bMaxPacketSize0 = 0x0040 > > idVendor = 0x1199 > > idProduct = 0x0fff > > bcdDevice = 0x0000 > > iManufacturer = 0x0001 <Sierra Wireless> > > iProduct = 0x0002 <USB MMC Storage> > > iSerialNumber = 0x0003 <SWOC22905731> > > bNumConfigurations = 0x0001 > > > > I added > > U3G_DEV(SIERRA, TRUINSTALL, 0), > > > > to sys/dev/usb/serial/u3g.c but that did not help > > Normally its U3GINIT_SIERRA in the driver I have in stable. If you do a > camcontrol eject pass0 > does it put the device into modem mode ? If you add > hw.usb.u3g.debug=1 > to /boot/loader.conf > what does the dmesg look like. I have used a number of sierra devices > in the past with the Alix boxes and they do work. Not sure about your > particular unit. > > ---Mike hi all, I removed the line I added to urg.c, then kldloaded u3g, and voila: ugen0.2: <AirCard Sierra Wireless, Incorporated> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON Mike, which minipci cards do you recomend? thanks all, danny ps: now the fun begins - coding
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1SSMQR-0005Lf-LU>