Date: Wed, 19 Dec 2012 11:59:31 +0100 From: Johan Hendriks <joh.hendriks@gmail.com> To: jg@internetx.com, freebsd-fs@freebsd.org Subject: Re: HAST + ZFS Problem Message-ID: <50D19E13.8020609@gmail.com> In-Reply-To: <50D036D7.4040206@internetx.com>
index | next in thread | previous in thread | raw e-mail
Juergen Gotteswinter schreef: > Hello, > > Currently I try to realize a Filer Setup, based up on FreeBSD 9 with > Carp, HAST and ZFS. Failover etc works fine so far, but when I start > writing data on the ZFS device the following error pops up continuously: > > Dec 17 14:59:06 filer1 hastd[2211]: [disk7] (primary) Remote request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2205]: [disk5] (primary) Remote request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2202]: [disk4] (primary) Remote request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2193]: [disk1] (primary) Remote request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2220]: [disk10] (primary) Remote request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2208]: [disk6] (primary) Remote request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2193]: [disk1] (primary) Local request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2199]: [disk3] (primary) Local request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2208]: [disk6] (primary) Local request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2220]: [disk10] (primary) Local request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2217]: [disk9] (primary) Local request > failed (Operation not supported by device): FLUSH. > Dec 17 14:59:06 filer1 hastd[2196]: [disk2] (primary) Remote request > failed (Operation not supported by device): FLUSH. > > > I already found threads where setting vfs.zfs.vdev.bio_flush_disable=1 > seemed to fix this, for me it had no effect. Also i tried setting > metaflush off in hast.conf, which doesnt change anything, too > > > Hardware Platform is a Dell Poweredge R515, with Perc H700 Controller > (configured to 10 Raid-0 Devices to get the single Disks). > > Any Ideas how to fix this? > > Cheers, > > Juergen > _______________________________________________ > freebsd-fs@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-fs > To unsubscribe, send any mail to "freebsd-fs-unsubscribe@freebsd.org" I am no expert on this, but nobody answered, so i will try. :D It seems to be a known issue is FreeBSD 9.0 i found the following on the net. ################## start r225832 has been merged to 9-STABLE on 4 Jan 2012 as r229509 and you shouldn't observe 'FLUSH: Operation not supported by device' constantly repeating. If you do this is very strange and you should recheck your build. Please provide the output of ident /sbin/hastd command. JK> and hast.conf configuration from both machines: JK> I've decided to put metaflush option on every single level just to be JK> sure. No effect. No need in disabling metaflush in your case. It will disable automatically after the first attempt failed. #################### end FreeBSD 9.0 was also released in january!, but i can not tell if this patch has made it into release 9.0 I think it does not. So if time permits, maybe try FreeBSD 9.1 which will proberbly be released any time now! regards and best wishes Johan Hendriks Neuteboom Automatiseringhome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50D19E13.8020609>