Date: Sun, 10 Feb 2013 00:09:39 +0100 From: Joel Dahl <joel@freebsd.org> To: Alexander Motin <mav@FreeBSD.org> Cc: freebsd-current@freebsd.org, Hans Petter Selasky <hselasky@c2i.net> Subject: Re: HEAD memsticks broken? [USB/CAM Problems?] Message-ID: <20130209230939.GQ21730@jd.benders.se> In-Reply-To: <51169568.60402@FreeBSD.org> References: <20130209073241.GN21730@jd.benders.se> <20130209092659.GO21730@jd.benders.se> <201302091115.24790.hselasky@c2i.net> <51169568.60402@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 09-02-2013 20:28, Alexander Motin wrote: > How long ago that HEAD was built? Could you get full dmesg? I don't > think that "PREVENT ALLOW MEDIUM REMOVAL" should cause device drop. "No > sense data present" also doesn't look right. As I mentioned earlier, I've tried several HEAD snapshots. This is booting a r246472 memstick. I currently have no way to get a full dmesg, but I have hand-typed the last parts below: usbus0: 480Mbps High Speed USB v2.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <0x1033> at usbus1 uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Intel SSDSA2BW160G3L 4PC1LE05> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 152627MB (312581808 512 byte sectors: 1H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1395499430 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus2 usbus0 uhub0: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 Root mount wating for: usbus2 usbus0 ugen0.4: <Broadcom Corp> at usbus0 ugen0.5: <Chicony Electronics Cp,. Ltd.> at usbus0 ugen2.3: <Kingston> at usbus2 umass0: <Kingston DataTraveler G3, class 0/0, rev 2.00/1.00, addr 3> on usbus2 umass0: SCSI over BUlk-Only; quirks = 0x0100 umass0:5:0:-1: Attached to scbus5 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: <Kingston DataTraveler G3 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3690MB (7557704 512 byte sectors: 255H 63S/T 470C) (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 (da0:umass-sim0:0:0:0): CAM status: Auto-Sense Retrieval Failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): got CAM status 0x50 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 4 refs (da0:umass-sim0:0:0:0): removing device entry Root mount waiting for: usbus2 ugen2.4: <Lenovo> at usbus2 Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro, noatime]... mountroot: waiting for device /dev/ufs/FreeBSD_Install ... Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. mountroot> I can probably take a couple of pictures of the entire dmesg, if that would be of any interest. -- Joel
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130209230939.GQ21730>