Date: Mon, 16 Jun 2014 10:33:02 +0200 From: Matthias Apitz <guru@unixarea.de> To: Hans Petter Selasky <hps@selasky.org> Cc: freebsd-usb@freebsd.org Subject: Re: Fwd: USB to parallel for printer HP LaserJet 4mL Message-ID: <20140616083302.GA1790@La-Habana> In-Reply-To: <539E94C5.50405@selasky.org> References: <20140610054403.GA1589@La-Habana> <539964AB.1030909@selasky.org> <20140613184921.GA1748@La-Habana> <539BEE2E.9050108@selasky.org> <20140614181138.GA1598@La-Habana> <539C9181.10304@selasky.org> <20140616054141.GA1358@La-Habana> <539E87EF.9080404@selasky.org> <20140616065050.GA1552@La-Habana> <539E94C5.50405@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
El día Monday, June 16, 2014 a las 08:55:01AM +0200, Hans Petter Selasky escribió: > Hi, > > If you disconnect the LPT port from the printer and repeat? > > Is the device sufficiently powered? Hi, I did: # kldunload ulpt.ko # kldload modules/usb/ulpt/ulpt.ko # sysctl hw.usb.ulpt.debug=15 hw.usb.ulpt.debug: 0 -> 15 now I power-cycled the printer, let it print the self test page, plug'ed in the cable into the printers parallel port, plug'ed in the USB end into the laptop, and: # date lunes, 16 de junio de 2014, 10:27:29 CEST # date > /dev/unlpt0 ^C # date lunes, 16 de junio de 2014, 10:27:52 CEST Jun 16 10:27:18 La-Habana kernel: ugen1.2: <Prlific Technology Inc.> at usbus1 Jun 16 10:27:18 La-Habana kernel: ulpt_probe: Jun 16 10:27:18 La-Habana kernel: ulpt_probe: Jun 16 10:27:18 La-Habana kernel: ulpt_attach: sc=0xc5839200 Jun 16 10:27:18 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1 Jun 16 10:27:18 La-Habana kernel: ulpt_attach: setting alternate config number: 1 Jun 16 10:27:18 La-Habana kernel: ulpt0: using bi-directional mode Jun 16 10:27:18 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status Jun 16 10:27:31 La-Habana last message repeated 13 times Jun 16 10:27:32 La-Habana kernel: ulpt_write_callback: state=0x0 actlen=0 Jun 16 10:27:32 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status Jun 16 10:27:49 La-Habana last message repeated 17 times Jun 16 10:27:50 La-Habana kernel: ulpt0: at uhub1, port 1, addr 2 (disconnected) Jun 16 10:27:50 La-Habana kernel: ulpt_detach: sc=0xc5839200 Jun 16 10:27:50 La-Habana kernel: ulpt_write_callback: state=0x2 actlen=0 Jun 16 10:27:51 La-Habana kernel: ulpt_probe: Jun 16 10:27:51 La-Habana kernel: ulpt_probe: Jun 16 10:27:51 La-Habana kernel: ulpt_attach: sc=0xc5529a80 Jun 16 10:27:51 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1 Jun 16 10:27:51 La-Habana kernel: ulpt_attach: setting alternate config number: 1 Jun 16 10:27:51 La-Habana kernel: ulpt0: using bi-directional mode Jun 16 10:27:51 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status Jun 16 10:27:57 La-Habana last message repeated 6 times Jun 16 10:27:57 La-Habana kernel: ugen1.2: <Prlific Technology Inc.> at usbus1 (disconnected) Jun 16 10:27:57 La-Habana kernel: ulpt0: at uhub1, port 1, addr 2 (disconnected) Jun 16 10:27:57 La-Habana kernel: ulpt_detach: sc=0xc5529a80 Thx matthias -- Matthias Apitz | /"\ ASCII Ribbon Campaign: E-mail: guru@unixarea.de | \ / - No HTML/RTF in E-mail WWW: http://www.unixarea.de/ | X - No proprietary attachments phone: +49-170-4527211 | / \ - Respect for open standards | en.wikipedia.org/wiki/ASCII_Ribbon_Campaign
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140616083302.GA1790>