Date: Sat, 15 Nov 2014 16:47:11 -0500 From: Dutch Ingraham <stoa@gmx.us> To: Jan =?ISO-8859-1?Q?Kokem=FCller?= <jan.kokemueller@gmail.com> Cc: freebsd-x11@freebsd.org Subject: Re: Xorg configure failure with Radeon card Message-ID: <20141115164711.dc9f2b0b219c604ceff307cf@gmx.us> In-Reply-To: <5467AD77.9060408@gmail.com> References: <5466DD69.5000205@gmx.us> <54673C5D.6040900@gmail.com> <54676567.8090200@gmx.us> <5467A3BE.2060207@gmail.com> <5467A75D.9000605@gmx.us> <5467AD77.9060408@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 15 Nov 2014 20:45:59 +0100 Jan Kokem=FCller <jan.kokemueller@gmail.com> wrote: > > Thanks again, Jan. I already had that there (from the 10.1-RELEASE > > notes), so the error is with that tuner set. >=20 > Does "kldload radeonkms" as root work, as in gives you a nice looking=20 > console in native screen resolution? If that works, at least the KMS=20 > driver does something correctly. >=20 > Another idea is to try to rebuild the "x11-drivers/xf86-video-ati" port,= =20 > if you haven't done that already. >=20 > Can you post the complete contents of /var/log/Xorg.0.log and the output= =20 > of dmesg after a failed attempt to start the X server? >=20 > -Jan Jan!! That's just the wake-up I needed! I went back to the last section o= f the wiki on graphics referred to above and re-read it. For some reason, = I was under the impression that loading the radeon firmware in the method d= escribed in that section was only if I wanted/needed kms to be loaded early= ; I assumed it would be loaded later in the boot process on its own, though= . =20 I was wrong. After issuing a #<kldload radeonkms> as you suggested, the fb= graphical resolution loaded. Then, taking wblock@'s advice (elsewhere) th= at Xorg -config is now generally unnecessary, just issued a <startx> and th= ings were working properly. A little xrandr action and both monitors are w= orking as desired. For the record, if anyone else is having this radeon issue, here is a summa= ry specific to the 5450 card (note some of this may be unnecessary, I haven= 't tested each yet): In loader.conf kern.vty=3Dvt radeonkmsfw_CEDAR_pfp_load=3D"YES" radeonkmsfw_CEDAR_me_load=3D"YES" radeonkmsfw_CEDAR_rlc_load=3D"YES" radeonkms_load=3D"YES" In make.conf: WITH_NEW_XORG=3DYES WITH_KMS=3DYES OPTIONS_SET=3DGALLIUM (or WITH_GALLIUM=3DYES, but the compiler will warn on= this when building dri) Thanks again for all your help, Jan. --=20 Dutch Ingraham <stoa@gmx.us>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141115164711.dc9f2b0b219c604ceff307cf>