Date: Thu, 21 May 2015 10:39:57 +0200 From: Willem Offermans <Willem@Offermans.Rompen.nl> To: Johann <jhugo.meraka@gmail.com> Cc: freebsd-wireless@freebsd.org Subject: Re: hostapd + freeradius can't connect Message-ID: <20150521083957.GB5453@vpn.offrom.nl> In-Reply-To: <555CC261.8080505@gmail.com> References: <01e701d08d75$fed02bd0$fc708370$@gmail.com> <CAJ-VmokxL6Zz=K2p9zeg84_EF5zr6Kk4mWv=oxt2FA59JktA0w@mail.gmail.com> <003c01d08dbe$6018b900$204a2b00$@gmail.com> <CAJ-Vmo=anQCxvHq1jCR9bNk2OCjfye5gV_74jeWcr%2BOdBd1WWw@mail.gmail.com> <555CB658.6040103@gmail.com> <555CC261.8080505@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dear FreeBSD friends, Sorry to interrupt here, but I got triggered by this e-mail thread. Do I understand correctly that it is possible to connect hostapd with FreeRadius and OpenLDAP? Would it be possible to do the authentication of wireless access over the ldap server? If yes, do I need FreeRadius to intermediate between hostapd and OpenLDAP? Is there some documentation around to setup hostapd + OpenLDAP or hostapd + FreeRadius + OpenLDAP under FreeBSD? Sorry, to interrp On Wed, May 20, 2015 at 07:20:33PM +0200, Johann wrote: > On 2015/05/20 06:29 PM, Johann wrote: > >On 2015/05/16 08:03 AM, Adrian Chadd wrote: > >>Hi, > >>Has this ever worked? > > > >Yes. > > > >I got it working in April 2012 on FreeBSD 8 and 9. I've used a > >FreeRadius server and a FreeBSD client with wpa_supplicant to test > >it. > > > >At that stage you had to enable the eap_server when you compile hostapd > > > ># echo HOSTAPD_CFLAGS+=-DEAP_SERVER >> /etc/src.conf > ># cd /usr/src/usr.sbin/wpa/hostapd > ># make > ># make install > > > >but Bernhard Schmidt fixed it so that EAP_SERVER was enabled by default. > > > > > >Here is the configs that I used: > > > >rc.conf > >hostname="AP-vlan" > >wlans_ath0="wlan0" > >create_args_wlan0="wlanmode hostap country ZA" > >ifconfig_wlan0="146.64.5.5/24 mode 11g channel 6" > >defaultrouter="146.64.5.1" > >hostapd_enable="YES" > >cloned_interfaces="bridge0" > >ifconfig_bridge0="addm sis0 addm wlan0 up" > >ifconfig_sis0="up" > > > > > >hostapd.conf > >interface=wlan0 > >ctrl_interface=/var/run/hostapd > >ctrl_interface_group=wheel > >ssid=testAP > >hw_mode=g > >channel=6 > > > >wpa=1 > >wpa_pairwise=CCMP TKIP > >wpa_key_mgmt=WPA-EAP > >wpa_pairwise=TKIP CCMP > >rsn_pairwise=CCMP > > > >Hope it helps > > > >Regards > >Johann > >_______________________________________________ > >freebsd-wireless@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > >To unsubscribe, send any mail to > >"freebsd-wireless-unsubscribe@freebsd.org" > > > Looks like this part of hostapd.conf got lost. > > ieee8021x=1 > own_ip_addr=146.64.5.5 > auth_server_addr=146.64.8.25 > auth_server_port=1812 > auth_server_shared_secret=same-as-on-freeradius > > Johann > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" -- Met vriendelijke groeten, With kind regards, Mit freundlichen Gruessen, De jrus wah, Wiel ************************************* W.K. Offermans
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150521083957.GB5453>