Date: Thu, 15 Nov 2007 02:58:56 -0500 From: Will McCutcheon <freebsd2@toyingwithfate.com> To: freebsd-drivers@freebsd.org Cc: des@des.no Subject: Re: Broadcom BCM5701KHB Message-ID: <20071115025856.mazfjnsm8g4so0cc@mail.toyingwithfate.com> In-Reply-To: <867ikk3o48.fsf@ds4.des.no> References: <20071114040351.vll77326ck8so4go@mail.toyingwithfate.com> <867ikk3o48.fsf@ds4.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Dag-Erling Sm=F8rgrav <des@des.no>:
> Will McCutcheon <freebsd2@toyingwithfate.com> writes:
>> I'm sure I'm doing something embarrassingly wrong, here,
>
> yes, at least two things: you didn't mention which FreeBSD version
> you're running, nor did you provide a dmesg.
Ah, I though I'd mentioned that I was running 5.5-STABLE but =20
apparently managed not to. My apologies. I provided the excerpt from =20
dmesg I thought was relevant, but I'll include the whole thing at the =20
bottom in case I was wrong.
>> none2@pci0:15:0:=09class=3D0x020000 card=3D0x0008106b chip=3D0x1645106b
>
> Supported by bge since June 2006 in HEAD and August 2006 in RELENG_6
> (including 6.2-RELEASE)
I assume, then, that it never made it's way into 5.5-STABLE and that =20
I'll need to upgrade to 6.2-RELEASE or later? Just want to make sure =20
before I buckle down and upgrade the whole OS. :) Thanks for your help!
W
dmesg output below:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.5-STABLE #15: Wed Nov 14 02:44:51 EST 2007
root@toyingwithfate.com:/usr/obj/usr/src/sys/WHISPER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (698.40-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1
=20
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMO=
V,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 268435456 (256 MB)
avail memory =3D 253018112 (241 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem =20
0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port =20
0x10a0-0x10af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1080-0x109f =20
irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <display, VGA> at device 13.0 (no driver attached)
fwohci0: <Texas Instruments TSB82AA2> mem =20
0xe0810000-0xe0813fff,0xe0814000-0xe08147ff irq 10 at device 14.0 on =20
pci0
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 55:aa:55:aa:55:aa:55:aa
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci0: <network, ethernet> at device 15.0 (no driver attached)
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port =20
0x10b0-0x10bf mem 0xe0000000-0xe07fffff irq 9 at device 16.0 on pci0
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x1000-0x107f mem =20
0xe0814c00-0xe0814c7f irq 3 at device 17.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:c3:39:2e
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi=
0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
orm0: <ISA Option ROMs> at iomem =20
0xe4000-0xeffff,0xe0000-0xe3fff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 698395737 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19541MB <Maxtor 52049U4/DAC10SC0> [39703/16/63] at ata0-master UDMA33
acd0: DVDROM <HITACHI DVD-ROM GD-5000/0212> at ata1-master PIO4
acd1: CDRW <SONY CD-RW CRX140E/1.0n> at ata1-slave PIO4
twed0: <Unit 1, JBOD, Normal> on twe0
twed0: 190782MB (390721968 sectors)
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071115025856.mazfjnsm8g4so0cc>