Date: Thu, 5 Apr 2007 08:09:39 +0200 From: Richard Walter <Richard.Walter@hob.de> To: Marcel Moolenaar <xcllnt@mac.com> Cc: freebsd-ia64@freebsd.org Subject: Re: Install problem HP integrity rx2660(Montecito) Message-ID: <461492A3.9@hob.de> In-Reply-To: <FFBC286D-78B2-4368-903B-2D8DA755FA4E@mac.com> References: <461357FF.1060505@hob.de> <FFBC286D-78B2-4368-903B-2D8DA755FA4E@mac.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, I have attached my console at the serial port at the backside of the machine (console IOIOIO). There is an auxiliary serial port too and a vga port. Where can i look for the vendor or divice ID, i have attached some outputs: Here are some outputs of the EFI Menu: Console Configuration P Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600 S VGA Acpi(HWP0002,PNP0A03,0)/Pci(3|0) devices C T D T Y C I R P F A L E G G #P #D #C Device Name == = = = == == == ============================================================= 0D R - - - 1 7 Acpi(HWP0002,PNP0A03,0) 0E R - - - 1 3 Acpi(HWP0002,PNP0A03,200) 0F R - - - 1 - Acpi(HWP0002,PNP0A03,300) 10 R - - - 1 - Acpi(HWP0002,PNP0A03,600) 11 R - - - 1 - Acpi(HWP0002,PNP0A03,700) 15 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|0) 16 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|1) 17 B - - 1 1 1 Acpi(HWP0002,PNP0A03,0)/Pci(1|2) 18 B - - 1 2 4 Usb Open Host Controller 19 B - - 1 2 1 Usb Open Host Controller 1A D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|2) 1B B - - 1 5 2 Acpi(HWP0002,PNP0A03,0)/Pci(3|0) 1D B X X 1 1 1 LSI Logic SAS Controller 1E B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|0) 1F B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|1) 2F D - - 2 - - Primary Standard Error Device 30 D - - 4 - - Primary Console Input Device 31 D - - 2 - - Primary Console Output Device 36 B - - 1 1 1 16550 Serial UART 37 B - - 1 5 3 VT-100+ Serial Console 38 B X - 1 3 1 Generic Usb Keyboard 39 B - - 1 2 1 Generic Usb Mouse 3A B X - 1 3 1 Generic Usb Keyboard 3B D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Usb(2, 1) 3E B - - 1 4 1 Usb Bot Mass Storage 4F B X X 1 2 3 HP DG146ABAB4 HPD5 50 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704) 51 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704) 8E D - - 1 2 - FAT File System [FAT12] 16 MB 8F D - - 1 2 - FAT File System [FAT32] 500 MB 90 D - - 1 1 - Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part2,Sig6F497DFA-D161-11DB-8003-D6217B60E588) 91 D - - 1 2 - FAT File System [FAT32] 400 MB Shell> Shell> map Device mapping table fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0) fs1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part1,Sig6F497DDC-D161-11DB-8002-D6217B60E588) fs2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part3,Sig6F497E18-D161-11DB-8004-D6217B60E588) blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0) blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0) blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0) blk3 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part1,Sig6F497DDC-D161-11DB-8002-D6217B60E588) blk4 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part2,Sig6F497DFA-D161-11DB-8003-D6217B60E588) blk5 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part3,Sig6F497E18-D161-11DB-8004-D6217B60E588) Shell> info -a all SYSTEM INFORMATION Date/Time: Apr 5, 2007 05:45:55 (20:07:04:05:05:45:55) Manufacturer: hp Product Name: server rx2660 Product Number: AD245A Serial Number: DEH47110B1 UUID: B6F1E2E1-EDF7-11DB-BAF2-FEFC60E9A772 System Bus Frequency: 266 MHz PROCESSOR MODULE INFORMATION # of L3 L4 Family/ CPU Logical Cache Cache Model Processor Module CPUs Speed Size Size (hex.) Rev State ------ ------- -------- ------ ------ ------- --- ------------ 0 2 1.6 GHz 9 MB None 20/00 C2 Active 1 2 1.6 GHz 9 MB None 20/00 C2 Active CPU threads are turned off. MEMORY INFORMATION ---- DIMM A ----- ---- DIMM B ----- DIMM Current DIMM Current --- ------ ---------- ------ ---------- 0 2048MB Active 2048MB Active 1 2048MB Active 2048MB Active 2 ---- ---- 3 ---- ---- Active Memory : 8192 MB Installed Memory : 8192 MB I/O INFORMATION BOOTABLE DEVICES Order Media Type Path ----- ---------- --------------------------------------- 1 CDROM Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0) 2 HARDDRIVE Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part1,Sig6F497DDC-D161-11DB-8002-D6217B60E588) 3 HARDDRIVE Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part3,Sig6F497E18-D161-11DB-8004-D6217B60E588) Seg Bus Dev Fnc Vendor Device Slot # # # # ID ID # Path --- --- --- --- ------ ------ --- ----------- 00 00 01 00 0x103C 0x1303 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|0) 00 00 01 01 0x103C 0x1302 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|1) 00 00 01 02 0x103C 0x1048 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|2) 00 00 02 00 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|0) 00 00 02 01 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|1) 00 00 02 02 0x1033 0x00E0 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|2) 00 00 03 00 0x1002 0x515E XX Acpi(HWP0002,PNP0A03,0)/Pci(3|0) 00 01 01 00 0x1000 0x0054 XX Acpi(HWP0002,PNP0A03,200)/Pci(1|0) 00 01 02 00 0x14E4 0x1648 XX Acpi(HWP0002,PNP0A03,200)/Pci(2|0) 00 01 02 01 0x14E4 0x1648 XX Acpi(HWP0002,PNP0A03,200)/Pci(2|1) Fast initialization: Enabled System Wake-On-LAN: Enabled BOOT INFORMATION Monarch CPU: Current Preferred Monarch Monarch CPU CPU Module/ Module/ Logical Logical Warnings ------- --------- -------- 0/0 0/0 AutoBoot: ON - Timeout is : 10 sec Boottest: BOOTTEST Settings Default Variable OS is not speedy boot aware. Selftest Setting --------- -------------- early_cpu Run this test late_cpu Run this test platform Run this test chipset Run this test io_hw Run this test mem_init Run this test mem_test Run this test LAN Address Information: LAN Address Path ----------------- ---------------------------------------- *Mac(0017A499ADBB) Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Mac(0017A499ADBB) Mac(0017A499ADBA) Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Mac(0017A499ADBA) FIRMWARE INFORMATION *System Firmware A Revision: 1.05 [4645] PAL_A: 7.31/7.46 PAL_B: 8.30 EFI Spec: 1.10 EFI Intel Drop: 14.62 EFI Build: 5.65 SAL Spec: 3.20 SAL_A: 2.00 SAL_B: 1.05 POSSE: 0.21 ACPI: 7.00 SMBIOS: 2.3.2a System Firmware B Revision: 1.05 [4645] BMC Revision: 5.02 IPMI: 1.00 Management Processor Revision: F.01.58 Updatable EFI Drivers: Floating-Point Software Assistance Handler: 00000118 Broadcom Gigabit Ethernet Driver: 00090404 SCSI Bus Driver: 00000021 SCSI Tape Driver: 00000020 Usb Ohci Driver: 00000034 USB Bus Driver: 00000014 USB Bot Mass Storage Driver: 00000014 Generic USB Mass Storage Driver: 00000015 * Indicates active system firmware image WARNING AND STOP BOOT INFORMATION CHIP REVISION INFORMATION Chip Logical Device Chip Type ID ID Revision ------------------- ------- ------ -------- Memory Controller 0 4032 0020 Root Bridge 0 4030 0020 Host Bridge 0000 122e 0032 Host Bridge 0002 122e 0032 Host Bridge 0003 12ee 0011 Host Bridge 0006 12ee 0011 Host Bridge 0007 12ee 0011 Other Bridge 0 0 0030 Other Bridge 0 0 5004 Baseboard MC 0 0 0502 SYSTEM SECURITY CONFIGURATION Trusted Boot: Not Supported TPM: Not Present Marcel Moolenaar schrieb: > > On Apr 4, 2007, at 12:47 AM, Richard Walter wrote: > >> Hello, >> >> I'am new with itanium boxes and freebsd. I tried to install freebsd 7.0 >> 03/2007 snapshot on a HP rx2660 and have the problem, that >> installation hangs >> at message "Trying to mount root from ufs:/dev/md0". >> I have the same problem with freebsd 6.2. >> Is this a bug or do i have made something wrong? > > The problem is that you don't have a console. Only uart0 is > found and that's the debug port. You have a remote management > card that has the console, but the card is not detected: > >> pci0: <simple comms> at device 1.1 (no driver attached) >> pci0: <simple comms, UART> at device 1.2 (no driver attached) > > If you have the vendor and device IDs of that card then I can > add those. Chances are that you'll see more :-) > > BTW: You should be able to find the vendor and device ID in > EFI. > > HTH, > > --Marcel Moolenaar > xcllnt@mac.com > > ____________ Virus checked by G DATA AntiVirusKit Version: AVK 17.3771 from 05.04.2007 Virus news: www.antiviruslab.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?461492A3.9>