Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 18 May 2011 14:31:28 +0200
From:      Maciej Milewski <milu@dat.pl>
To:        "crsnet.pl" <crsnet@crsnet.pl>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: Re: Re: FreeBSD 8.2 and Lenovo X300 WWAN Modem
Message-ID:  <201105181431.29074.milu@dat.pl>
In-Reply-To: <c49aae006cbd2ed51ec4fadaa89d4912@i-pi.pl>
References:  <8bce9b8a86d5c7a83095d8e58f794f64@i-pi.pl> <201105181307.01358.milu@dat.pl> <c49aae006cbd2ed51ec4fadaa89d4912@i-pi.pl>

next in thread | previous in thread | raw e-mail | index | archive | help


Wednesday 18 of May 2011 14:13:00 crsnet.pl napisał(a):
> >>  No.
> >>  I check with minicom that AT+CFUN=1 (Turns modem on) give Error but
> >>  AT+PCSTATE=1 turns it on.
> >>  Unfortunately when i change it in ppp.conf from AT+CFUN=1 to
> >>  AT+PCSTATE=1 that give me
> >>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Send: AT+PCSTATE=1^M
> >>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Expect(2): OK
> >> 
> >>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Received:
> >> AT+PCSTATE=1^M^M
> >> 
> >>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Received: ERROR^M
> >>  May 18 12:13:50 x60s ppp[2697]: tun0: Chat: Expect timeout
> > 
> > Oh and very important thing:
> > MC5725 is a CDMA EV-DO card. It will not work in GSM/UMTS network
> > AFAIK.
> > 
> > https://www.sierrawireless.com/Newsroom/newsreleases/2006/09-18_sierra_wi
> > reless_reaches_two_ev- do_revision_a_product_milestones.aspx
> > 
>  :( I must check that is a available CDMA network in Poland.
Look on the http://www.bez-
kabli.pl/viewtopic.php?t=12788&postdays=0&postorder=asc&start=15

>  But if any here know that i can use GPS builded into this Modem i will
>  be gratful.
> 
>  Adrian.
http://forum.thinkpads.com/viewtopic.php?f=30&t=61164

--
Maciej



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201105181431.29074.milu>