Date: Tue, 15 Oct 2002 17:27:04 -0700 From: "Ian Cartwright" <ian351c@cox.net> To: <hackers@freebsd.org> Subject: Logitech iTouch Cordless Desktop Message-ID: <000001c274aa$c0b2f090$6600a8c0@iansxp>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Greetings,
I have been trying to get a Logitech Cordless Desktop to work with
FreeBSD without success.
The cordless desktop consists of:
1) Cordless Keyboard model number Y-RE20
2) Cordless Mouse model number M-RR63
3) RF Receiver for Keyboard and Mouse model number C-BD9-DUAL
The receiver has a USB cable and a PS/2 cable. If I do not plug the PS/2
cable into my computer I cannot use the keyboard at all past the FreeBSD
BootMgr. With the PS/2 cable plugged in, I can use the keyboard to do
all the normal things (login, command line, etc.), but the mouse doesn't
seem to work at all. There are devices detected for ukbd0 and ums0 and
the appropriate daemons are launched (usbd and moused).
Is there any supportfor this hardware in FreeBSD as of 4.7-RELEASE? I
would be eager to help anyone currently working on support for this
hardware if not...
Thanks.
Ian Cartwright
Enclosed is output from dmesg.
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) MP (1106.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 536805376 (524224K bytes)
avail memory = 517128192 (505008K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xc000-0xc03f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:60:08:46:d8:8f
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x104c, dev=0x8020) at 10.0 irq 5
pci0: <unknown card> (vendor=0x1013, dev=0x6003) at 11.0 irq 12
isab0: <PCI to ISA bridge (vendor=1106 device=3147)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA133 controller> port 0xd800-0xd80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 12 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.05, addr 2
uhub1: 4 ports with 4 removable, bus powered
uhid0: American Power Conversion Back-UPS LS 700 FW:19.b2 .D USB FW:b2 , rev 1.10/1.06, addr 3, iclass 3/0
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 4
uhub2: 4 ports with 4 removable, self powered
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 5, iclass 7/1
ukbd0: Logitech USB Receiver, rev 1.10/13.10, addr 6, iclass 3/1
kbd1 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/13.10, addr 6, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 12 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xcc000-0xd3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
acd0: CD-RW <24X10> at ata1-master PIO4
acd1: CDROM <CD-ROM Drive/F5E> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c274aa$c0b2f090$6600a8c0>