Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 7 May 2001 18:19:27 -0700
From:      "CS Reddy" <creddy@qwest.net>
To:        <freebsd-questions@FreeBSD.ORG>
Subject:   FreeBSD 4.2/4.3 Installation saga!!
Message-ID:  <001f01c0d75c$ed1f2be0$0200000a@voicestream.com>

index | next in thread | raw e-mail

[-- Attachment #1 --]


[-- Attachment #2 --]
1)Start the Install Process from my CD-ROM.
2)Start kernel configuration in full screen Visual mode.
3)I get 7 Hardware Conflicts. This is what I see after expanding all nodes:

---Active-Drivers-----------------7 Conflicts-------Dev---IRQ--Port-- 
Storage: 
 AdvanSys SCSI narrow controller                    adv0 
 Adaptec 154x SCSI controller                       aha0  
 Adaptec 152x SCSI controller                       aic0 
 ATA/ATAPI compatible disk controller               ata0     14 0x1f0 
 ATA/ATAPI compatible disk controller               ata1     15 0x170 
 Buslogic SCSI controller                           bt0  
 Floppy disk controller                             fdc0     6  0x3f0 
Network: 
 IBM EtherJet, CS89x0-based Ethernet adapters  CONF cs0         0x300 
 NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapt CONF ed0      10 0x280 
 Fujitsu MD86960A/MB869685A Ethernet adapters  CONF fe0         0x300 
 AT&T Starlan 10 and EN100,3C507,NI5210 Ether  CONF ie0      10 0x300 
 DEC Etherworks 2 and 3 Ethernet adapters      CONF le0      5  0x300 
 Isolan, Novell NE2100/NE32-VL Ethernet adapt  CONF lnc0     10 0x280 
 SMC/Megahertz Ethernet adapters               CONF sn0      10 0x300 
Communications: 
 Parallel Port chipset                              ppc0     7 
 8250/16450/16550 Serial port                       sio0     4  0x3f8 
 8250/16450/16550 Serial port                       sio1     3  0x2f8 
Input: 
 Keyboard                                           atkbd0   1  
 PS/2 Mouse                                         psm0     12  
 Syscons console driver                             sc0  
Multimedia: 
Miscellaneous: 
 PC-card controller                           CONF pcic0     10 0x3e0 
 Math coprocessor                                   npx0     13 0xf0 
---Inactive-Drivers---------------------------------Dev-------------- 
Storage: 
Network: 
Communications: 
 8250/16450/16550 Serial port                       sio2 
 8250/16450/16550 Serial port                       sio3 
Input: 
           Multimedia: 
Miscellaneous: 
 PC-card controller                                pcic1 
--------------------------------------------------------------------- 
  
--------------------------------------------------------------------- 
[Enter] Expand device list      [X] Expand all lists 
[TAB] Switch fields             [Q] Save and Exit        [ ? ] Help

4)I resolve all hardware conflicts. I get the following screen:

---Active-Drivers------------------------------------Dev---IRQ--Port-- 
Storage: 
 ATA/ATAPI compatible disk controller               ata0     14 0x1f0 
 Floppy disk controller                             fdc0     6  0x3f0  
Network: 
Communications: 
 Parallel Port chipset                              ppc0     7 
 8250/16450/16550 Serial port                       sio0     4  0x3f8 
 8250/16450/16550 Serial port                       sio1     3  0x2f8 
Input: 
 Keyboard                                           atkbd0   1  
 PS/2 Mouse                                         psm0     12  
 Syscons console driver                             sc0  
Multimedia: 
Miscellaneous: 
 Math coprocessor                                   npx0     13 0xf0 
---Inactive-Drivers---------------------------------Dev-------------- 
Storage: 
 AdvanSys SCSI narrow controller                    adv0 
 Adaptec 154x SCSI controller                       aha0  
 Adaptec 152x SCSI controller                       aic0 
 ATA/ATAPI compatible disk controller               ata1     15 0x170 
 Buslogic SCSI controller                           bt0  
Network: 
 IBM EtherJet, CS89x0-based Ethernet adapters       cs0         0x300 
 NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapt      ed0      10 0x280 
 Fujitsu MD86960A/MB869685A Ethernet adapters       fe0         0x300 
 AT&T Starlan 10 and EN100,3C507,NI5210 Ether       ie0      10 0x300 
 DEC Etherworks 2 and 3 Ethernet adapters           le0      5  0x300 
 Isolan, Novell NE2100/NE32-VL Ethernet adapt       lnc0     10 0x280 
 SMC/Megahertz Ethernet adapters                    sn0      10 0x300 

Communications: 
 8250/16450/16550 Serial port                       sio2 
 8250/16450/16550 Serial port                       sio3 
Input: 
Multimedia: 
Miscellaneous: 
 PC-card controller                                 pcic1 
 PC-card controller                                 pcic0    10 0x3e0 
--------------------------------------------------------------------- 
  

--------------------------------------------------------------------- 
[Enter] Expand device list      [X] Expand all lists 
[TAB] Switch fields             [Q] Save and Exit        [ ? ] Help

5) I hit Q and then the probe starts. I see messages scrolling by and then I 
see I big blue screen (of death!) and it says:

"Probing Devices.... (This may take a while)"

and the process comes to a grinding halt. I waited several times for more than 30 minutes
and then I had to do a hard boot. 

I actually tried several possible ways to resolve the hardware conflicts with no luck.
I always got the blue screen.
help

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001f01c0d75c$ed1f2be0$0200000a>