Date: Sat, 24 Mar 2001 23:01:15 -0800 From: "Kulraj Gurm (bosa.ca account)" <kulraj@bosa.ca> To: <freebsd-hardware@freebsd.org> Subject: IDE Hard Drives Message-ID: <005201c0b4f9$6264bf40$64c8a8c0@asknet.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Seeking hardware advice, on which brand IDE drives are recomended to work at ATA100. Problem : ad0: 29319MB <FUJITSU MPG3307AT> [59570/16/63] at ata0-master UDMA66 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at sym0 bus 0 target 0 lun 0 da0: <IBM DGHS09V 03E0> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) ad0: UDMA ICRC WRITE ERROR blk# 2111 retrying ad0: UDMA ICRC WRITE ERROR blk# 2111 retrying ad0: UDMA ICRC WRITE ERROR blk# 2111 retrying ad0: UDMA ICRC WRITE ERROR blk# 2111 falling back to PIO mode Hardware : Gigabyte 7ZX Rev 5 (ATA100 compliant) AMD Athlon 800 Tekram 390F IBM 9.1Gb SCSI-3 Drive Fujitsu 30Gb Hard Drive The Fujitsu IDE drive is new, just added (and still empty) and therefore right now it would be painless to remove and replace with a drive that will not give those ICRC WRITE ERROR's. There are many posts in the mailing list archives about these and related issues but everyone falls short of recommending a drive or even sharing their experience about a drive that does work to full potential. If anyone has a drive working at ATA66 or even better ATA100 please let me know which brand. Or am I barking up the wrong tree? Is the issue the VIA IDE controller and therefore I'm stuck with it? Thanking anyone in advance for taking the trouble to reply. Kulraj Gurm [-- Attachment #2 --] <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Seeking hardware advice, on which brand IDE drives are recomended to work at ATA100.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Problem : </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2> ad0: 29319MB <FUJITSU MPG3307AT> [59570/16/63] at ata0-master UDMA66 <BR> Waiting 15 seconds for SCSI devices to settle <BR> Mounting root from ufs:/dev/da0s1a<BR> da0 at sym0 bus 0 target 0 lun 0<BR> da0: <IBM DGHS09V 03E0> Fixed Direct Access SCSI-3 device <BR> da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled<BR> da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)<BR> ad0: UDMA ICRC WRITE ERROR blk# 2111 retrying<BR> ad0: UDMA ICRC WRITE ERROR blk# 2111 retrying<BR> ad0: UDMA ICRC WRITE ERROR blk# 2111 retrying<BR> ad0: UDMA ICRC WRITE ERROR blk# 2111 falling back to PIO mode</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Hardware :</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Gigabyte 7ZX Rev 5 (ATA100 compliant)</FONT></DIV> <DIV><FONT face=Arial size=2>AMD Athlon 800</FONT></DIV> <DIV><FONT face=Arial size=2>Tekram 390F</FONT></DIV> <DIV><FONT face=Arial size=2>IBM 9.1Gb SCSI-3 Drive</FONT></DIV> <DIV><FONT face=Arial size=2>Fujitsu 30Gb Hard Drive</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>The Fujitsu IDE drive is new, just added (and still empty) and therefore right now it would be painless to remove and replace with a drive that will not give those ICRC WRITE ERROR's.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>There are many posts in the mailing list archives about these and related issues but everyone falls short of recommending a drive or even sharing their experience about a drive that does work to full potential. If anyone has a drive working at ATA66 or even better ATA100 please let me know which brand.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Or am I barking up the wrong tree? Is the issue the VIA IDE controller and therefore I'm stuck with it? </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Thanking anyone in advance for taking the trouble to reply.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Kulraj Gurm</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?005201c0b4f9$6264bf40$64c8a8c0>