Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Feb 2004 20:21:13 -0000
From:      "Jimmy Firewire" <trigonometric@softhome.net>
To:        "Kris Kennaway" <kris@obsecurity.org>
Cc:        freebsd-current@freebsd.org
Subject:   Re: RSA/DSA Host key generation didn't happen
Message-ID:  <01a201c3ec25$9a7156d0$0601a8c0@SPECULUSHX1THE>
References:  <00d901c3ec11$5a600ff0$0601a8c0@SPECULUSHX1THE> <20040205183346.GA18731@xor.obsecurity.org>

next in thread | previous in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
On Thu, Feb 05, 2004 at 05:56:17PM -0000, Jimmy Firewire wrote:
>> Did anyone else find that on 5.2-RELEASE, that the RSA and DSA host keys
>> were not generated on first boot, as happens on other distros? Could this
>> possibly be related to the DHCP/resolve.conf issue mentioned a while
back:
>>
>> http://makeashorterlink.com/?A5D921F47
>>
>> I also experienced some strange DHCP problem.
----- Original Message ----- 
From: "Kris Kennaway" <kris@obsecurity.org>
To: "Jimmy Firewire" <trigonometric@softhome.net>
Cc: <freebsd-current@freebsd.org>
Sent: Thursday, February 05, 2004 6:33 PM
Subject: Re: RSA/DSA Host key generation didn't happen
>Unlikely, unless there's something deeper going on.

>it would help if you could provide a log showing what the boot scripts
>are doing during the first boot.

OK, I just installed it again on a different partition. I have attached the
output from dmesg.
Is this what you wanted? Is there some other way I should have taken more
logs?

I have just confirmed that on this box, it does not even attempt to setup
the host keys,
or run sshd at startup, is this supposed to happen?

And also, using dhclient doesn't work properly. Touching /etc/resolv.conf
causes the file to be populated with the line:

nameserver 192.168.1.23

This is wierd...

thanks

anonymousPseudonym

[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
    root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e1000.
mptable_probe: MP Config Table has bad signature: Mous
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 3200+ (2205.01-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1073676288 (1023 MB)
avail memory = 1033519104 (985 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdeb0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xc0000000-0xcfffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe3002000-0xe3002fff irq 5 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe3003000-0xe3003fff irq 11 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:5 INTA BIOS irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xe2000000-0xe20000ff irq 11 at device 5.0 on pci1
rl0: Ethernet address: 00:40:f4:7b:ac:f4
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
pci2: <display> at device 0.1 (no driver attached)
orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 2205014715 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6b3f660
ad0: 152627MB <WDC WD1600JB-00EVA0> [310101/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc6b3f360
ad1: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-slave UDMA100
acd0: DVDR <ASUS DVD-RW DRW-0402P> at ata1-master PIO4
Mounting root from ufs:/dev/ad1s2a

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01a201c3ec25$9a7156d0$0601a8c0>