Date: Tue, 13 Aug 2019 16:30:31 -0500 (CDT) From: Mit Matelske <mit@pt.net> To: =?iso-8859-1?Q?S=F8ren?= Schmidt <soren.schmidt@gmail.com> Cc: Marcin Wojtas <mw@semihalf.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Espressobin anyone ? Message-ID: <1021311926.304550.1565731831094.JavaMail.zimbra@perftech.com> In-Reply-To: <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <1565435583431-0.post@n6.nabble.com> <1F22D8DA-E583-4858-911F-F057EC1A30E0@gmail.com> <532380450.3296650.1565636798211.JavaMail.zimbra@perftech.com> <4A647617-EEC0-4A75-ADF6-3D3F553F9AFF@gmail.com> <1634814667.34671.1565644485029.JavaMail.zimbra@perftech.com> <CAPv3WKeMEe9mW8YYS8k=J9obwde9KEidMHHQpPJ0idrhcyx=RQ@mail.gmail.com> <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Soren-=20
Thanks for the code snippet! That will fix one of the problems.=20
I still can't mount my filesystem, though. I think I'm doing something real=
ly simple, wrong. I believe I'm running the latest code and added some prin=
tfs to show the kernel setting the regulator:=20
usbus1 on ehci0=20
syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1=20
sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) =3D 19=20
sdhci_xenon0: vqmmc-supply regulator found=20
sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0x1e808-0=
x1e80b irq 24 on simplebus1=20
ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1=20
Could there be a problem with how I am setting up my filesystem? I've tried=
both freebsd-ufs and freebsd as the type, with no luck. A gpart listing of=
my SD card:=20
root@fbl:~ # gpart list da3=20
Geom name: da3=20
modified: false=20
state: OK=20
fwheads: 255=20
fwsectors: 63=20
last: 62521335=20
first: 3=20
entries: 4=20
scheme: GPT=20
Providers:=20
1. Name: da3p1=20
Mediasize: 41943040 (40M)=20
Sectorsize: 512=20
Stripesize: 0=20
Stripeoffset: 1536=20
Mode: r0w0e0=20
efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)=20
rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0=20
rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b=20
label: (null)=20
length: 41943040=20
offset: 1536=20
type: efi=20
index: 1=20
end: 81922=20
start: 3=20
2. Name: da3p2=20
Mediasize: 31968979456 (30G)=20
Sectorsize: 512=20
Stripesize: 0=20
Stripeoffset: 41944576=20
Mode: r0w0e0=20
efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)=
=20
rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0=20
rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b=20
label: (null)=20
length: 31968979456=20
offset: 41944576=20
type: freebsd-ufs=20
index: 2=20
end: 62521335=20
start: 81923=20
Consumers:=20
1. Name: da3=20
Mediasize: 32010928128 (30G)=20
Sectorsize: 512=20
Mode: r0w0e0=20
Thanks!!=20
Mit=20
From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com>=20
To: "Marcin Wojtas" <mw@semihalf.com>=20
Cc: "Mit Matelske" <mit@pt.net>, "freebsd-arm" <freebsd-arm@freebsd.org>=20
Sent: Tuesday, August 13, 2019 12:55:09 PM=20
Subject: Re: Espressobin anyone ?=20
Hi=20
That doesn=E2=80=99t seen to work on the espressobin, or least I can=E2=80=
=99t get it to pick it up.=20
I use this patch as a workaround:=20
Index: main.c=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
--- main.c (revision 350496)=20
+++ main.c (working copy)=20
@@ -463,6 +462,13 @@=20
int rv;=20
char *rootdev;=20
+#if defined(__aarch64__)=20
+ /* SOS HACK in rootdev, at least Espressobin gets this wrong */=20
+ printf("Setting currdev hack\n");=20
+ set_currdev("disk0p2");=20
+ return (0);=20
+#endif=20
+=20
/*=20
* First choice: if rootdev is already set, use that, even if=20
* it's wrong.=20
Its not pretty but it does the job until I get time to look into why bootar=
gs aren=E2=80=99t passed / won=E2=80=99t stick, probably something I havn=
=E2=80=99t backported to my -stable12 sources yet...=20
-S=C3=B8ren=20
On 13 Aug 2019, at 01.38, Marcin Wojtas < [ mailto:mw@semihalf.com | mw@sem=
ihalf.com ] > wrote:=20
Hi,=20
Not sure if it's what you are looking for, but in order to autoboot, I=20
simply pass 'rootdev=3DdiskXpY' in the bootargs variable. Here's example fr=
om=20
A3720-DB (same should work on EspressoBin):=20
Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatload usb 0:1=20
${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}=20
boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}=20
resetting USB...=20
USB0: Register 2000104 NbrPorts 2=20
Starting the controller=20
USB XHCI 1.00=20
USB1: USB EHCI 1.00=20
- ______ ____ _____ _____=20
| ____| | _ \ / ____| __ \=20
| |___ _ __ ___ ___ | |_) | (___ | | | |=20
| ___| '__/ _ \/ _ \| _ < \___ \| | | |=20
| | | | | __/ __/| |_) |____) | |__| |=20
| | | | | | || | | |=20
|_| |_| \___|\___||____/|_____/|_____/=20
```=20
`=20
=E2=95=94=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=
=95=90=E2=95=90=E2=95=90=E2=95=90Welcome to FreeBSD=E2=95=90=E2=95=90=E2=95=
=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=
=E2=95=90=E2=95=97 s` `.....---.......--.```=20
-/=20
=E2=95=91 =E2=95=91 +o .--` /y:`=20
+.=20
=E2=95=91 1. Boot Multi user [Enter] =E2=95=91 yo`:. :o=20
`+-=20
=E2=95=91 2. Boot Single user =E2=95=91 y/ -/` -o/=20
=E2=95=91 3. Escape to loader prompt =E2=95=91 .-=20
::/sy+:.=20
=E2=95=91 4. Reboot =E2=95=91 / `--=20
/=20
=E2=95=91 =E2=95=91 `:=20
:`=20
=E2=95=91 Options: =E2=95=91 `:=20
:`=20
=E2=95=91 5. Kernel: default/kernel (1 of 1) =E2=95=91 /=20
/=20
=E2=95=91 6. Boot Options =E2=95=91 .-=20
-.=20
=E2=95=91 =E2=95=91 -- -.=20
=E2=95=91 =E2=95=91 `:` `:`=20
=E2=95=91 =E2=95=91 .-- `--.=20
=E2=95=9A=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=
=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=
=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=
=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=
=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=
=90=E2=95=9D .---.....----.=20
Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop=20
Loading kernel...=20
/boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa94=20
syms=3D[0x8+0x13aaa8+0x8+0x12610d]=20
Loading configured modules...=20
can't find '/boot/entropy'=20
Using DTB provided by EFI at 0x8000000.=20
---<<BOOT>>---=20
KDB: debugger backends: ddb=20
KDB: current backend: ddb=20
Copyright (c) 1992-2019 The FreeBSD Project.=20
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=20
The Regents of the University of California. All rights reserved.=20
FreeBSD is a registered trademark of The FreeBSD Foundation.=20
FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC arm64=20
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM=
=20
8.0.0)=20
WARNING: WITNESS option enabled, expect reduced performance.=20
VT: init without driver.=20
Starting CPU 1 (1)=20
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=20
[...]=20
Best regards,=20
Marcin=20
pon., 12 sie 2019 o 23:14 Mit Matelske < [ mailto:mit@pt.net | mit@pt.net ]=
> napisa=C5=82(a):=20
BQ_BEGIN
Soren-=20
Thanks for the quick response. I built this kernel with revision 350924.=20
I'll dig into whats going on in the morning.=20
Mind posting your diff for your loader.efi?=20
Thanks again!=20
Mit=20
----- Original Message -----=20
From: "S=C3=B8ren Schmidt" < [ mailto:soren.schmidt@gmail.com | soren.schmi=
dt@gmail.com ] >=20
To: "Mit Matelske" < [ mailto:mit@pt.net | mit@pt.net ] >=20
Cc: "tscho" < [ mailto:johannes@t-beutel.com | johannes@t-beutel.com ] >, "=
freebsd-arm" <=20
[ mailto:freebsd-arm@freebsd.org | freebsd-arm@freebsd.org ] >=20
Sent: Monday, August 12, 2019 3:49:48 PM=20
Subject: Re: Espressobin anyone ?=20
Hi=20
Looks like your sources may be too old, you need to be at least at r348882=
=20
to get the fix for the SD card VCC regulator.=20
That change fixed it for me backported to 12-stable...=20
The currdev problem still exists, I have it hardwired in my loader for=20
aarch64 :)=20
-S=C3=B8ren=20
BQ_BEGIN
On 12 Aug 2019, at 21.06, Mit Matelske < [ mailto:mit@pt.net | mit@pt.net ]=
> wrote:=20
I'm having a couple little hiccups booting this board also. One has=20
been commented on already, that I can't get the loader to automatically=20
start loading the kernel on "disk0p2"...=20
BQ_BEGIN
The second, is that the kernel can't find the SD card after booting so=20
BQ_END
it can't mount the root filesystem. I'm using the dts/dtb and kernel from=
=20
the 13-current branch.=20
BQ_BEGIN
Thanks for any and all help. I haven't used u-boot in about decade.=20
BQ_END
Spoiled by the x86 platform.=20
BQ_BEGIN
Mit Matelske=20
***U-boot environment:***=20
Marvell>> printenv=20
baudrate=3D115200=20
bootargs=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000=20
BQ_END
root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevname=3D0=20
BQ_BEGIN
bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc=
=20
BQ_END
0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr=20
BQ_BEGIN
bootdelay=3D2=20
bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc=
=20
BQ_END
0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr=20
BQ_BEGIN
console=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000=20
eth1addr=3D00:51:82:11:22:01=20
eth2addr=3D00:51:82:11:22:02=20
eth3addr=3D00:51:82:11:22:03=20
ethact=3Dneta@30000=20
ethaddr=3DF0:AD:4E:09:6B:8F=20
ethprime=3Deth0=20
fdt_addr=3D0x4f00000=20
fdt_high=3D0xffffffffffffffff=20
fdt_name=3Defi/boot/armada-3720-espressobin.dtb=20
fdtcontroladdr=3D3f7161b8=20
gatewayip=3D10.4.50.254=20
get_images=3Dtftpboot $kernel_addr $image_name; tftpboot $fdt_addr=20
BQ_END
$fdt_name; run get_ramfs=20
BQ_BEGIN
get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv ramfs_addr=20
BQ_END
0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi=20
BQ_BEGIN
hostname=3Dmarvell=20
image_name=3Defi/freebsd/loader.efi=20
initrd_addr=3D0xa00000=20
initrd_size=3D0x2000000=20
ipaddr=3D0.0.0.0=20
kernel_addr=3D0x5000000=20
loadaddr=3D0x5000000=20
netdev=3Deth0=20
netmask=3D255.255.255.0=20
ramfs_addr=3D0x8000000=20
ramfs_name=3D-=20
root=3Droot=3D/dev/nfs rw=20
rootpath=3D/srv/nfs/=20
serverip=3D0.0.0.0=20
set_bootargs=3Dsetenv bootargs $console $root=20
BQ_END
ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none=20
nfsroot=3D$serverip:$rootpath $extra_params=20
BQ_BEGIN
stderr=3Dserial@12000=20
stdin=3Dserial@12000=20
stdout=3Dserial@12000=20
***Full boot logs:***=20
U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)=20
Model: Marvell Armada 3720 Community Board ESPRESSOBin=20
CPU @ 1000 [MHz]=20
L2 @ 800 [MHz]=20
TClock @ 200 [MHz]=20
DDR @ 800 [MHz]=20
DRAM: 1 GiB=20
U-Boot DT blob at : 000000003f7161b8=20
Comphy-0: USB3 5 Gbps=20
Comphy-1: PEX0 2.5 Gbps=20
Comphy-2: SATA0 6 Gbps=20
SATA link 0 timeout.=20
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode=20
flags: ncq led only pmp fbss pio slum part sxs=20
PCIE-0: Link down=20
MMC: sdhci@d0000: 0, sdhci@d8000: 1=20
SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,=20
BQ_END
total 4 MiB=20
BQ_BEGIN
Net: eth0: neta@30000 [PRIME]=20
Hit any key to stop autoboot: 0=20
switch to partitions #0, OK=20
mmc0 is current device=20
reading efi/freebsd/loader.efi=20
603872 bytes read in 49 ms (11.8 MiB/s)=20
reading efi/boot/armada-3720-espressobin.dtb=20
15946 bytes read in 17 ms (916 KiB/s)=20
## Starting EFI application at 05000000 ...=20
Scanning disk [ mailto:sdhci@d0000.blk | sdhci@d0000.blk ] ...=20
Card did not respond to voltage select!=20
mmc_init: -95, time 50=20
Found 1 disks=20
Consoles: EFI console=20
FreeBSD/arm64 EFI loader, Revision 1.1=20
Command line arguments: loader.efi=20
EFI version: 2.05=20
EFI Firmware: Das U-boot (rev 0.00)=20
Console: efi (0)=20
Failed to find bootable partition=20
Startup error in /boot/lua/loader.lua: seconds=20
LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.=20
can't load 'kernel'=20
Type '?' for a list of commands, 'help' for more detailed help.=20
OK=20
OK set currdev=3Ddisk0p2=20
OK boot=20
/boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94=20
BQ_END
syms=3D[0x8+0x137dd8+0x8+0x126260]=20
BQ_BEGIN
Using DTB provided by EFI at 0x8000000.=20
---<<BOOT>>---=20
KDB: debugger backends: ddb=20
KDB: current backend: ddb=20
Copyright (c) 1992-2019 The FreeBSD Project.=20
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=20
The Regents of the University of California. All rights reserved.=20
FreeBSD is a registered trademark of The FreeBSD Foundation.=20
FreeBSD 13.0-CURRENT GENERIC arm64=20
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on=20
BQ_END
LLVM 6.0.1)=20
BQ_BEGIN
WARNING: WITNESS option enabled, expect reduced performance.=20
VT: init without driver.=20
Starting CPU 1 (1)=20
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=20
arc4random: WARNING: initial seeding bypassed the cryptographic random=20
BQ_END
device because it was not yet seeded and the knob 'bypass_before_seeding'=
=20
was enabled.=20
BQ_BEGIN
random: entropy device external interface=20
MAP 3e681000 mode 2 pages 1=20
MAP 3ffa6000 mode 2 pages 1=20
kbd0 at kbdmux0=20
ofwbus0: <Open Firmware Device Tree>=20
simplebus0: <Flattened device tree simple bus> on ofwbus0=20
simplebus1: <Flattened device tree simple bus> on simplebus0=20
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f on simplebus1=20
BQ_BEGIN
simple_mfd1: <Simple MFD (Multi-Functions Device)> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f on simplebus1=20
BQ_BEGIN
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0=20
gic0: <ARM Generic Interrupt Controller v3.0> mem=20
BQ_END
0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d9=
1fff,0x1da0000-0x1dbffff=20
irq 27 on simplebus1=20
BQ_BEGIN
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on=
=20
simple_mfd0=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpioregulator0: <GPIO controlled regulator> on ofwbus0=20
gpioregulator0: cannot get pin 0=20
gpioregulator0: cannot parse parameters=20
device_attach: gpioregulator0 attach returned 6=20
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0=20
Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000=20
Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000=20
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on=
=20
simple_mfd0=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpioregulator0: <GPIO controlled regulator> on ofwbus0=20
gpioregulator0: cannot get pin 0=20
gpioregulator0: cannot parse parameters=20
device_attach: gpioregulator0 attach returned 6=20
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on=
=20
simple_mfd0=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpioregulator0: <GPIO controlled regulator> on ofwbus0=20
gpioregulator0: cannot get pin 0=20
gpioregulator0: cannot parse parameters=20
device_attach: gpioregulator0 attach returned 6=20
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on=
=20
simple_mfd0=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpioregulator0: <GPIO controlled regulator> on ofwbus0=20
gpioregulator0: cannot get pin 0=20
gpioregulator0: cannot parse parameters=20
device_attach: gpioregulator0 attach returned 6=20
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on=
=20
simple_mfd0=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
gpioregulator0: <GPIO controlled regulator> on ofwbus0=20
gpioregulator0: cannot get pin 0=20
gpioregulator0: cannot parse parameters=20
device_attach: gpioregulator0 attach returned 6=20
cpulist0: <Open Firmware CPU Group> on ofwbus0=20
cpu0: <Open Firmware CPU> on cpulist0=20
cpu1: <Open Firmware CPU> on cpulist0=20
pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0=20
syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1=20
syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1=20
uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on=20
BQ_END
simplebus1=20
BQ_BEGIN
uart0: console (115200,n,8,1)=20
gpio0: <Armada 37x0 North Bridge GPIO Controller> mem=20
BQ_END
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on=
=20
simple_mfd0=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1=20
gpio0: <Armada 37x0 South Bridge GPIO Controller> mem=20
BQ_END
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20
BQ_BEGIN
gpio0: cannot allocate memory window=20
device_attach: gpio0 attach returned 6=20
mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1=20
mvneta0: version is 10=20
mvneta0: Ethernet address: 00:a6:39:ca:e8:00=20
mdio0: <MDIO> on mvneta0=20
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0=20
e6000sw0: <Marvell 88E6341> on mdio0=20
e6000sw0: multi-chip addressing mode (0x1)=20
e6000sw0: CPU port at 0=20
e6000sw0: fixed port at 0=20
e6000sw0: PHY at port 1=20
miibus0: <MII bus> on e6000sw0=20
e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0=20
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,=20
BQ_END
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto=20
BQ_BEGIN
e6000sw0: PHY at port 2=20
miibus1: <MII bus> on e6000sw0=20
e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1=20
e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,=20
BQ_END
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto=20
BQ_BEGIN
e6000sw0: PHY at port 3=20
miibus2: <MII bus> on e6000sw0=20
e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2=20
e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,=20
BQ_END
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto=20
BQ_BEGIN
e6000sw0: switch is ready.=20
etherswitch0: <Switch controller> on e6000sw0=20
xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on=20
BQ_END
simplebus1=20
BQ_BEGIN
xhci0: 32 bytes context size, 32-bit DMA=20
usbus0 on xhci0=20
syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1=20
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq=20
BQ_END
17 on simplebus1=20
BQ_BEGIN
usbus1: EHCI version 1.0=20
usbus1 on ehci0=20
syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1=20
sdhci_xenon0: <Armada Xenon SDHCI controller> mem=20
BQ_END
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1=20
BQ_BEGIN
ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1=20
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS=20
ahcich0: <AHCI channel> at channel 0 on ahci0=20
device_attach: ahcich0 attach returned 6=20
gpioregulator0: <GPIO controlled regulator> on ofwbus0=20
gpioregulator0: cannot get pin 0=20
gpioregulator0: cannot parse parameters=20
device_attach: gpioregulator0 attach returned 6=20
cryptosoft0: <software crypto>=20
Timecounters tick every 1.000 msec=20
mvneta0: link state changed to UP=20
e6000sw0port1: link state changed to DOWN=20
e6000sw0port2: link state changed to DOWN=20
e6000sw0port3: link state changed to DOWN=20
usbus0: 5.0Gbps Super Speed USB v3.0=20
usbus1: 480Mbps High Speed USB v2.0=20
Release APs...done=20
CPU 0: ARM Cortex-A53 r0p4 affinity: 0=20
Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>=20
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...=20
Instruction Set Attributes 1 =3D <>=20
Root mount waiting for: Processor Features 0 =3D=20
BQ_END
<GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>=20
BQ_BEGIN
usbus1 Processor Features 1 =3D <0>=20
usbus0 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS=20
BQ_END
Mem,MixedEndian,16bit ASID,1TB PA>=20
BQ_BEGIN
Memory Model Features 1 =3D <>=20
Memory Model Features 2 =3D <32b CCIDX,48b VA>=20
Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6=20
BQ_END
Breakpoints,PMUv3,Debug v8>=20
BQ_BEGIN
Debug Features 1 =3D <0>=20
Auxiliary Features 0 =3D <0>=20
Auxiliary Features 1 =3D <0>=20
CPU 1: ARM Cortex-A53 r0p4 affinity: 1=20
WARNING: WITNESS option enabled, expect reduced performance.=20
ugen0.1: <Generic XHCI root HUB> at usbus0=20
ugen1.1: <Marvell EHCI root HUB> at usbus1=20
uhub0 on usbus0=20
uhub1 on usbus1=20
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on=20
BQ_END
usbus0=20
BQ_BEGIN
uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on=20
BQ_END
usbus1=20
BQ_BEGIN
uhub0: 2 ports with 2 removable, self powered=20
uhub1: 1 port with 1 removable, self powered=20
mountroot: waiting for device /dev/ufs/FreeBSD_Install...=20
Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.=20
Loader variables:=20
vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install=20
vfs.root.mountfrom.options=3Dro,noatime=20
Manual root filesystem specification:=20
<fstype>:<device> [options]=20
Mount <device> using filesystem <fstype>=20
and with the specified (optional) option list.=20
eg. ufs:/dev/da0s1a=20
zfs:zroot/ROOT/default=20
cd9660:/dev/cd0 ro=20
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)=20
? List valid disk boot devices=20
. Yield 1 second (for background tasks)=20
<empty line> Abort manual input=20
mountroot> ?=20
List of GEOM managed disk devices:=20
mountroot>=20
BQ_END
_______________________________________________=20
[ mailto:freebsd-arm@freebsd.org | freebsd-arm@freebsd.org ] mailing list=
=20
[ https://lists.freebsd.org/mailman/listinfo/freebsd-arm | https://lists.fr=
eebsd.org/mailman/listinfo/freebsd-arm ]=20
To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"=20
BQ_END
_______________________________________________=20
[ mailto:freebsd-arm@freebsd.org | freebsd-arm@freebsd.org ] mailing list=
=20
[ https://lists.freebsd.org/mailman/listinfo/freebsd-arm | https://lists.fr=
eebsd.org/mailman/listinfo/freebsd-arm ]=20
To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"=20
BQ_END
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1021311926.304550.1565731831094.JavaMail.zimbra>