Date: Sun, 05 Oct 2003 01:55:43 +0300 From: Dan Naumov <dan.naumov@ofw.fi> To: ticso@cicely.de Cc: freebsd-current@freebsd.org Subject: Re: SMBus / I2C h/w sensors and FreeBSD 5.1 Message-ID: <1065308142.966.15.camel@localhost.localdomain> In-Reply-To: <20031004214443.GV886@cicely12.cicely.de> References: <1065281296.966.11.camel@localhost.localdomain> <20031004214443.GV886@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 2003-10-05 at 00:44, Bernd Walter wrote:
> You need to have intpm hardware to get this driver working.
> There are other drivers available depending on your chipset.
> What is the pciconf -lv output?
There you go:
====================================================
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x700e1022 rev=0x13
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-761 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x700f1022 rev=0x00
hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-761 CPU to AGP Bridge (AGP 4x)'
class = bridge
subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x06861106 chip=0x06861106 rev=0x40
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686/A/B "Super South" PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:7:1: class=0x01018a card=0x05711106 chip=0x05711106
rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
uhci0@pci0:7:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x1a
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1@pci0:7:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x1a
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
none0@pci0:7:4: class=0x0c0500 card=0x30571106 chip=0x30571106 rev=0x40
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686A/B ACPI Power Management Controller'
class = serial bus
subclass = SMBus
rl0@pci0:10:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
class = network
subclass = ethernet
pcm0@pci0:14:0: class=0x040100 card=0x20001274 chip=0x58801274 rev=0x02
hdr=0x00
vendor = 'Creative (Was: Ensoniq)'
device = '5880 AudioPCI'
class = multimedia
subclass = audio
nvidia0@pci1:5:0: class=0x030000 card=0x87001462 chip=0x025310de
rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GeForce4 Ti 4200 [NV25.4]'
class = display
subclass = VGA
====================================================
> > Investingating further, I see that I have no "/dev/smb" on my system
> > even though I have "device smb" in my kernel config. I've also noticed a
> > line saying "pci0: <serial bus, SMBus> at device 7.4 (no driver
> > attached)" in my dmesg.
>
> So it's no intpm hardware.
What drivers should I be using then ? I had lm_sensors on Linux work
with this hardware...
Sincerely,
Dan Naumov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1065308142.966.15.camel>