Date: Mon, 4 Apr 2005 19:07:02 -0400 From: Walentyn <Walentyn@gorsk.com> To: freebsd-stable@freebsd.org Subject: Re: FreeBSD mpd PPTP client connection to SnapGearLITE+ Message-ID: <1112656022.4251c896e7046@w2b.bigimap.com> In-Reply-To: <200504041014.00115.doconnor@gsoft.com.au> References: <1112572809.42508389e0170@w2b.bigimap.com> <200504041014.00115.doconnor@gsoft.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Daniel O'Connor <doconnor@gsoft.com.au>: > > I've done Windows -> FreeBSD PopTop server without any big issues. > So have I, but I'm going from FreeBSD client to SnapGearLITE UCLinux PopTop server appliance > It would be helpful if you supplied log files and configs to download > somewhere. > (Please see below.) > PS PPTP encryption sucks, use openvpn or IPSec :) > Unfortunately, have no choice in the matter. > -- > Daniel O'Connor software and network engineer > for Genesis Software - http://www.gsoft.com.au > "The nice thing about standards is that there > are so many of them to choose from." > -- Andrew Tanenbaum > GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C > Thank you! -- Walentyn -------------------------------------------------- # cat /usr/local/etc/mpd/mpd.conf # default: load vpn vpn: new -i ng0 vpn vpn set iface disable on-demand set iface enable proxy-arp set bundle disable multilink set bundle authname "[remote username]" set bundle password "[password]" set link yes acfcomp protocomp set link mtu 1400 #### set link mru 1400 set link no pap chap set link enable chap set link keep-alive 60 180 set ipcp yes vjcomp set bundle enable compression set ccp yes mppc set ccp yes mpp-e40 #### set ccp no mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless set bundle yes crypt-reqd open -------------------------------------------------- # cat /usr/local/etc/mpd/mpd.links # vpn: set link type pptp set pptp self [FBSD client IP] set pptp peer [SGL server IP] set pptp enable originate outcall set pptp disable incoming -------------------------------------------------- Console output: # mpd Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 12394, version 3.18 (root@freebsd.org 08:48 21-Mar-2005) [vpn] ppp node is "mpd12394-vpn" [vpn] using interface ng0 [vpn] IFACE: Open event [vpn] IPCP: Open event [vpn] IPCP: state change Initial --> Starting [vpn] IPCP: LayerStart [vpn:vpn] [vpn] bundle: OPEN event in state CLOSED [vpn] opening link "vpn"... [vpn] link: OPEN event [vpn] LCP: Open event [vpn] LCP: state change Initial --> Starting [vpn] LCP: LayerStart [vpn] device: OPEN event in state DOWN pptp0: connecting to [SGL server IP]:1723 [vpn] device is now in state OPENING pptp0: connected to [SGL server IP]:1723 pptp0: attached to connection with [SGL server IP]:1723 pptp0-0: outgoing call connected at 64000 bps [vpn] PPTP call successful [vpn] device: UP event in state OPENING [vpn] device is now in state UP [vpn] link: UP event [vpn] link: origination is local [vpn] LCP: Up event [vpn] LCP: state change Starting --> Req-Sent [vpn] LCP: phase shift DEAD --> ESTABLISH [vpn] LCP: SendConfigReq #1 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #2 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #3 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #4 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #5 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #6 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #7 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #8 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #9 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigReq #10 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 1dcbdb30 AUTHPROTO CHAP MSOFTv2 [vpn] LCP: state change Req-Sent --> Stopped [vpn] LCP: LayerFinish [vpn] LCP: parameter negotiation failed [vpn] LCP: LayerFinish [vpn] device: CLOSE event in state UP pptp0-0: clearing call [vpn] device is now in state CLOSING [vpn] device: CLOSE event in state CLOSING [vpn] device is now in state CLOSING [vpn] device: DOWN event in state CLOSING [vpn] device is now in state DOWN [vpn] link: DOWN event [vpn] LCP: Down event [vpn] LCP: state change Stopped --> Starting [vpn] LCP: phase shift ESTABLISH --> DEAD [vpn] LCP: LayerStart [vpn] device: OPEN event in state DOWN [vpn] pausing 9 seconds before open [vpn] device is now in state DOWN [vpn] device: OPEN event in state DOWN [vpn] device is now in state DOWN pptp0-0: peer call disconnected res=disconnect request err=none pptp0-0: killing channel pptp0: closing connection with [SGL server IP]:1723 pptp0: killing connection with [SGL server IP]:1723 [vpn] device: OPEN event in state DOWN -------------------------------------------------- SnapGearLITE corresponding log entries: Apr 04 22:48:32 pptpd[10188]: CTRL: Client [FBSD client IP] control connection started Apr 04 22:48:32 pptpd[10188]: CTRL: Starting call (launching pppd, opening GRE) Apr 04 22:48:32 pptpd[10188]: CTRL: Allocating pty/tty pair Apr 04 22:48:32 pptpd[10188]: CTRL: Allocated pty/tty pair (/dev/ptyp1,/dev/ttyp1) Apr 04 22:48:33 pppd[10189]: pppd 2.3.8 started by (unknown), uid 0 Apr 04 22:48:33 pppd[10189]: Using interface ppp2 Apr 04 22:48:33 pppd[10189]: pppd create pidfile Apr 04 22:48:33 pppd[10189]: Connect: ppp2 <--> /dev/ttyp1 Apr 04 22:48:33 pppd[10189]: Will not do PAP for user PoPToP Apr 04 22:48:33 pppd[10189]: Will not do CHAP for user PoPToP Apr 04 22:48:33 pptpd[10188]: GRE: Discarding duplicate packet Apr 04 22:48:33 pptpd[10188]: CTRL: EOF or bad error reading ctrl packet length. Apr 04 22:48:33 pptpd[10188]: CTRL: couldn't read packet header (exit) Apr 04 22:48:33 pptpd[10188]: CTRL: CTRL read failed Apr 04 22:48:33 pptpd[10188]: CTRL: Client [FBSD client IP] control connection finished Apr 04 22:48:33 pppd[10189]: Modem hangup Apr 04 22:48:33 pppd[10189]: Connection terminated. Apr 04 22:48:33 pppd[10189]: Exit. --------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1112656022.4251c896e7046>