Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 08 Apr 2009 09:02:16 -0700
From:      Sean Bruno <sean.bruno@dsl-only.net>
To:        Andreas Tobler <andreast-list@fgznet.ch>
Cc:        freebsd-current <freebsd-current@freebsd.org>
Subject:   Re: PPC Macbook + Firewire
Message-ID:  <1239206536.7373.2.camel@localhost.localdomain>
In-Reply-To: <49DC8D7F.5070403@fgznet.ch>
References:  <1239169884.2625.4.camel@localhost.localdomain> <1239181170.2433.1935.camel@horst-tla>  <49DC8D7F.5070403@fgznet.ch>

next in thread | previous in thread | raw e-mail | index | archive | help

> 
> In case you meant the PowerBook (PPC based), attached a dmesg.
> 
> Andreas

Yup, I did mean the "PowerBook"  :)

> fwohci0: <Apple UniNorth> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
> fwohci0: [ITHREAD]
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 8.
> fwohci0: EUI64 00:0d:93:ff:fe:35:b3:80
> fwohci0: invalid speed 7 (fixed to 3).
> fwohci0: Phy 1394a available S800, 3 ports.
> fwohci0: Link S800, max_rec 4096 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:0d:93:35:b3:80
> fwe0: Ethernet address: 02:0d:93:35:b3:80
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: fwohci_intr_core: BUS reset
> fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER mode

> firewire0: fw_explore_nodePre 1394a-2000 detected
> firewire0: fw_explore_node: fwdev->speed(S400) set lower than binfo->link_spd(S100)
> firewire0: New S400 device ID:0001d200005b017a
> sbp0: sbp_show_sdev_info: sbp0:0:0: ordered:1 type:0 EUI:0001d200005b017a node:0 speed:2 maxrec:0
> sbp0: sbp_show_sdev_info: sbp0:0:0 'Oxford Semiconductor Ltd.   ' 'OXFORD IDE Device LUN 0 ' '000138'

> da0 at sbp0 bus 0 target 0 lun 0
> da0: <Oxford S OXFORD IDE Devic 0138> Fixed Simplified Direct Access SCSI-4 device 
> da0: 50.000MB/s transfers
> da0: 131071MB (268435455 512 byte sectors: 255H 63S/T 16709C)


This looks like a successful boot.  Is everything working ok on your
PowerBook then?

Sea




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1239206536.7373.2.camel>