Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Nov 2013 23:53:51 +0100
From:      Mathias Picker <Mathias.Picker@virtual-earth.de>
To:        Mark Felder <feld@FreeBSD.org>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: BETA3 running *hot* on my Acer 5553g (AMD Mobile Phenom)
Message-ID:  <1384383231.9609.8.camel@marcopolo.fritz.box>
In-Reply-To: <1384378499.3852.47142865.7D5C8AB6@webmail.messagingengine.com>
References:  <1384345015.1876.11.camel@marcopolo.fritz.box> <1384378499.3852.47142865.7D5C8AB6@webmail.messagingengine.com>

next in thread | previous in thread | raw e-mail | index | archive | help

On Wed, 2013-11-13 at 15:34 -0600, Mark Felder wrote:
> On Wed, Nov 13, 2013, at 6:16, Mathias Picker wrote:
> > Hi all,
> > 
> > I just installed FreeBSD 10 BETA3 on my Acer 5553g, which before had
> > 9-stable running.
> > 
> > This laptop allways was quite hot, but with 9-stable it ran around 52C
> > when idle...
> > Now this is up to 60C, and when I actually use it the temp reaches 94C
> > and it only survivies through throttling the cpu.
> > 
> > I've switched of the descrete graphics card (which doesn't work with kms
> > anyway) and use the hd4200 on the motherboard only. (see
> > http://forums.freebsd.org/showthread.php?t=29448)
> > 
> > I tried everything I know, but have no idea where to go from here. I
> > just ordered one of these horrible laptop-cooling stands, which will
> > probably help the machine to survive, but also probably be very loud :(
> > 
> > Any ideas, tips, help welcome. 
> > 
> > Some Infos:
> > 
> > - the systems seems to use C1E (only C1 state visible)
> > - dmesg: http://pastebin.com/NaEQXYBH
> > loader.conf: http://pastebin.com/bnmqPak3
> > rc.conf: http://pastebin.com/HKERzgde
> > FreeBSD marcopolo 10.0-BETA3 FreeBSD 10.0-BETA3 #0 r257580: Sun Nov  3
> > 19:43:01 UTC 2013     root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC
> > amd64
> > 
> > Anything else? 
> > 
> > Any help would be most welcome, 
> > 
> > Mathias
> 
> 
> I'm curious if you're running powerd or not

With powerd.

> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1384383231.9609.8.camel>