Date: Tue, 18 Apr 2017 10:57:32 -0600 From: Ian Lepore <ian@freebsd.org> To: =?ISO-8859-1?Q?Otac=EDlio?= <otacilio.neto@bsd.com.br>, freebsd-arm@freebsd.org Subject: Re: beaglebone black: MMC partition switch failed Message-ID: <1492534652.96207.28.camel@freebsd.org> In-Reply-To: <e3db0f4b-ff4c-0c23-3fac-933d953d6f9c@bsd.com.br> References: <5bac0dbc-6d2b-c757-0cd3-babbd048cfd2@gmail.com> <CAKE2PDubyQx2VtOJQt=2NTYVDgfUzxi1UO5RDhJ_M0xVe2nZRg@mail.gmail.com> <20170418155102.GO2455@FreeBSD.org> <e3db0f4b-ff4c-0c23-3fac-933d953d6f9c@bsd.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 2017-04-18 at 13:54 -0300, Otacílio wrote: > Em 18/04/2017 12:51, Glen Barber escreveu: > > > > On Tue, Apr 18, 2017 at 08:42:58AM -0700, jungle Boogie wrote: > > > > > > On 15 April 2017 at 18:50, jungle boogie <jungleboogie0@gmail.com > > > > wrote: > > > > > > > > Hi All, > > > > > > > > It's been awhile since I've been able to run FreeBSD on my BBB. > > > > It was > > > > failing somewhere, but I didn't have good serial cable to see > > > > what was > > > > happening. > > > > > > > > Using the latest freebsd head image: > > > > FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img > > > > > > > > I'm writing it to my microSD card: > > > > sudo dd if=FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413- > > > > r316750.img > > > > of=/dev/sdf bs=8M > > > > 128+0 records in > > > > 128+0 records out > > > > 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.01005 s, 1.1 GB/s > > > > > > > > > > > > Putting it in the BB and holding s2 for three seconds as > > > > mentioned in the > > > > FBSD Journal article[0]. > > > > > > > > Upon doing so, I see this: > > > > U-Boot SPL 2017.01-rc3 (Apr 13 2017 - 12:30:59) > > > > Trying to boot from MMC1** First descriptor is NOT a primary > > > > desc on 0:1 ** > > > > MMC partition switch failed > > > > *** Warning - MMC partition switch failed, using default > > > > environment > > > > > > > > ** Partition 1 not valid on device 0 ** > > > > spl_register_fat_device: fat register err - -1 > > > > spl_load_image_fat: error reading image u-boot.img, err - -1 > > > > MMC partition switch failed > > > > *** Warning - MMC partition switch failed, using default > > > > environment > > > > > > > > spl: no partition table found > > > > SPL: failed to boot from all boot devices > > > > ### ERROR ### Please RESET the board ### > > > > > > > Anyone have recommendations on how to fix this? > > There appears to be an issue with the 20170413 image. Please check > > if > > the FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170405- > > r316508.img.xz > > image works. > > > > Glen > > > I tested them a few days ago and none of them worked. I also > compiled > locally and it does not work, even an image generated for the RPI3 > prints the same error message. The 20170405 image Glen mentioned works fine, I just DLed and tested it. -- Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1492534652.96207.28.camel>