Date: Sat, 13 Jul 2019 19:16:30 +0900 From: Denis Polygalov <dpolyg@gmail.com> To: freebsd-arm@freebsd.org Subject: Booting FreeBSD on Rock64 Message-ID: <169de7cf-32f2-7b7b-c12e-a86a4b6a9e87@gmail.com>
index | next in thread | raw e-mail
[-- Attachment #1 --] Here is my attempt to advance this thread: http://freebsd.1045724.x6.nabble.com/Booting-FreeBSD-on-Rock64-td6312109.html by using new release of ayufan's u-boot: 2017.09-rockchip-ayufan-1063-g29843fbd42 and most recent FreeBSD image: FreeBSD-13.0-CURRENT-arm64-aarch64-20190711-r349909-memstick.img Booting from USB drive lead to near the same infinite reset loop: ... Found 3 disks Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi EFI version: 2.05 EFI Firmware: Das U-boot (rev 0.00) Console: efi (0) Load Path: \efi\boot\bootaa64.efi Load Device: UNKNOWN(0001,0004) "Synchronous Abort" handler, esr 0x96000210 ELR: fbec72c4 LR: fbe97500 x0 : 0000000000000000 x1 : 0000000000000000 x2 : 0000000000000000 x3 : 0000000000000000 x4 : 00000000fbecf890 x5 : 00000000fbec6838 x6 : 00000000fbeea150 x7 : 0000000000000000 x8 : 0000000000000000 x9 : 0000000000000074 x10: 00000000fbeef8a8 x11: 0000000000000296 x12: 0000000000000296 x13: 0000000000000000 x14: 00000000f9f68b90 x15: 0000000000000000 x16: 0000000000000045 x17: 0000000000000000 x18: 0000000000000000 x19: 00000000fbee9e48 x20: 00000000fbece8d3 x21: 0000000000000000 x22: 0000000000000000 x23: 00000000fbeef8b0 x24: 0000000000000000 x25: 0000000000000000 x26: 00000000fbeeeb40 x27: 0000000020001000 x28: 8000000000000005 x29: 00000000fbee9e00 Resetting CPU ... Notice however absence of line "Failed to find bootable partition" comparing to the first post in original thread. As of the network boot it reaches screen with ASCII art of the FreeBSD loader and then hangs here: Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop Loading kernel... /boot/kernel/kernel text=0x93951c data=0x1914c8+0x84ab1c syms=[0x8+0x1387f8+0x8+0x124a11] Loading configured modules... can't find '/boot/entropy' Using DTB provided by EFI at 0x8200000. / For the network boot I'm using the same image as for USB boot: FreeBSD-13.0-CURRENT-arm64-aarch64-20190711-r349909-memstick.img unpacked and served via NFS. Can someone suggest what is going on here? Full USB and network boot logs are attached. Regards, Denis. [-- Attachment #2 --] DDR version 1.13 20180428 ID:0x805 N In LPDDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB ddrconfig:7 OUT U-Boot SPL 2017.09-rockchip-ayufan-1063-g29843fbd42 (Jul 08 2019 - 11:55:08) board_init_sdmmc_pwr_en setup_ddr_param 1 booted from SPI flash Trying to boot from SPI NOTICE: BL31: v1.3(debug):9d3f591 NOTICE: BL31: Built : 14:39:02, Jan 17 2018 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-rockchip-ayufan-1063-g29843fbd42 (Jul 08 2019 - 11:55:26 +0000) Model: Pine64 Rock64 DRAM: 4 GiB MMC: rksdmmc@ff520000: 0, rksdmmc@ff500000: 1 SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 misc_init_r cpuid=XXX serial=XXX Net: eth0: ethernet@ff540000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! mmc_init: -95, time 9 Card did not respond to voltage select! mmc_init: -95, time 9 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: Core Release: 3.10a USB3: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 3 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Sony Rev: PMAP Prod: Storage Media Type: Removable Hard Disk Capacity: 7416.0 MB = 7.2 GB (15187968 x 512) ... is now current device Scanning usb 0:1... Found EFI removable media binary efi/boot/bootaa64.efi reading efi/boot/bootaa64.efi 641560 bytes read in 60 ms (10.2 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC ## Starting EFI application at 02000000 ... Card did not respond to voltage select! mmc_init: -95, time 9 Scanning disk rksdmmc@ff520000.blk... MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x44 exceeds max(0x0) Card did not respond to voltage select! mmc_init: -95, time 9 Scanning disk rksdmmc@ff500000.blk... MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x44 exceeds max(0x0) Scanning disk usb_mass_storage.lun0... Found 3 disks Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi EFI version: 2.05 EFI Firmware: Das U-boot (rev 0.00) Console: efi (0) Load Path: \efi\boot\bootaa64.efi Load Device: UNKNOWN(0001,0004) "Synchronous Abort" handler, esr 0x96000210 ELR: fbec72c4 LR: fbe97500 x0 : 0000000000000000 x1 : 0000000000000000 x2 : 0000000000000000 x3 : 0000000000000000 x4 : 00000000fbecf890 x5 : 00000000fbec6838 x6 : 00000000fbeea150 x7 : 0000000000000000 x8 : 0000000000000000 x9 : 0000000000000074 x10: 00000000fbeef8a8 x11: 0000000000000296 x12: 0000000000000296 x13: 0000000000000000 x14: 00000000f9f68b90 x15: 0000000000000000 x16: 0000000000000045 x17: 0000000000000000 x18: 0000000000000000 x19: 00000000fbee9e48 x20: 00000000fbece8d3 x21: 0000000000000000 x22: 0000000000000000 x23: 00000000fbeef8b0 x24: 0000000000000000 x25: 0000000000000000 x26: 00000000fbeeeb40 x27: 0000000020001000 x28: 8000000000000005 x29: 00000000fbee9e00 Resetting CPU ... [-- Attachment #3 --] DDR version 1.13 20180428 ID:0x805 N In LPDDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB ddrconfig:7 OUT U-Boot SPL 2017.09-rockchip-ayufan-1063-g29843fbd42 (Jul 08 2019 - 11:55:08) board_init_sdmmc_pwr_en setup_ddr_param 1 booted from SPI flash Trying to boot from SPI NOTICE: BL31: v1.3(debug):9d3f591 NOTICE: BL31: Built : 14:39:02, Jan 17 2018 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.09-rockchip-ayufan-1063-g29843fbd42 (Jul 08 2019 - 11:55:26 +0000) Model: Pine64 Rock64 DRAM: 4 GiB MMC: rksdmmc@ff520000: 0, rksdmmc@ff500000: 1 SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 misc_init_r cpuid=XXX serial=XXX Net: eth0: ethernet@ff540000 Hit any key to stop autoboot: 0 => dhcp Speed: 1000, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.201 (1 ms) Using ethernet@ff540000 device TFTP from server 192.168.1.101; our IP address is 192.168.1.201 Filename 'boot/loader.efi'. Load address: 0x800800 Loading: ############################################ 2.2 MiB/s done Bytes transferred = 641560 (9ca18 hex) => tftpboot ${kernel_addr_r} boot/loader.efi Speed: 1000, full duplex Using ethernet@ff540000 device TFTP from server 192.168.1.101; our IP address is 192.168.1.201 Filename 'boot/loader.efi'. Load address: 0x2000000 Loading: ############################################ 2.2 MiB/s done Bytes transferred = 641560 (9ca18 hex) => tftpboot ${fdt_addr_r} boot/dtb/rockchip/rk3399-rockpro64.dtb Speed: 1000, full duplex Using ethernet@ff540000 device TFTP from server 192.168.1.101; our IP address is 192.168.1.201 Filename 'boot/dtb/rockchip/rk3399-rockpro64.dtb'. Load address: 0x1f00000 Loading: ##### 1.8 MiB/s done Bytes transferred = 72977 (11d11 hex) => bootefi ${kernel_addr_r} ${fdt_addr_r} ## Starting EFI application at 02000000 ... Card did not respond to voltage select! mmc_init: -95, time 9 Scanning disk rksdmmc@ff520000.blk... MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x44 exceeds max(0x0) Card did not respond to voltage select! mmc_init: -95, time 10 Scanning disk rksdmmc@ff500000.blk... MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x1 exceeds max(0x0) MMC: block number 0x44 exceeds max(0x0) Found 2 disks Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi EFI version: 2.05 EFI Firmware: Das U-boot (rev 0.00) Console: efi (0) Load Path: boot\dtb\rockchip\rk3399-rockpr Setting currdev to net0: Speed: 1000, full duplex Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local | | ______ ____ _____ _____ | ____| | _ \ / ____| __ \ | |___ _ __ ___ ___ | |_) | (___ | | | | | ___| '__/ _ \/ _ \| _ < \___ \| | | | | | | | | __/ __/| |_) |____) | |__| | | | | | | | || | | | |_| |_| \___|\___||____/|_____/|_____/ ... Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop Loading kernel... /boot/kernel/kernel text=0x93951c data=0x1914c8+0x84ab1c syms=[0x8+0x1387f8+0x8+0x124a11] Loading configured modules... can't find '/boot/entropy' Using DTB provided by EFI at 0x8200000. /home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?169de7cf-32f2-7b7b-c12e-a86a4b6a9e87>