Date: Tue, 7 Jun 2022 12:10:35 +0000 (UTC) From: Filippo Moretti <filippomore@yahoo.com> To: FreeBSD Current <freebsd-current@freebsd.org> Subject: Problem with Radeon Message-ID: <1932797089.307285.1654603835293@mail.yahoo.com> References: <1932797089.307285.1654603835293.ref@mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
------=_Part_307284_556835552.1654603835291 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable I have reinstalled CURRENT and I get an error while trying to initialize ra= deon:it was working fine before reinstalling CURRENT. [drm] radeon kernel modesetting enabled.=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 drmn0: <drmn> on vgapci0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 vgapci0: child drmn0 requested pci_enable_io=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 vgapci0: child drmn0 requested pci_enable_io=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x1043:0x0356 = 0x00)=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0 .=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 [drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO fo= r ATO=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0 M IIO=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0= =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =C2=A0 ATOM BIOS: 68D8.12.17.0.4.AS06.U122 drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [drm] Detected VRAM RAM=3D1024M, BAR=3D256M [drm] RAM width 128bits DDR [TTM] Zone=C2=A0 kernel: Available graphics memory: 8373714 KiB [TTM] Zone=C2=A0=C2=A0 dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 1024M of GTT memory ready. [drm] Loading REDWOOD Microcode drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin' r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin" [drm ERROR :evergreen_init] Failed to load firmware! drmn0: Fatal error during GPU init [drm] radeon: finishing device. [TTM] Finalizing pool allocator [TTM] Zone=C2=A0 kernel: Used memory at exit: 0 KiB [TTM] Zone=C2=A0=C2=A0 dma32: Used memory at exit: 0 KiB [drm] radeon: ttm finalized Warning: can't remove non-dynamic nodes (dri)! device_attach: drmn0 attach returned 2 acpi_wmi0: <ACPI-WMI mapping> on acpi0 These are the ports installed:drm-510-kmod-5.10.113_1=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0 DRM drivers modules drm-kmod-20220501=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2= =A0=C2=A0=C2=A0=C2=A0 Metaport of DRM modules for the linuxkpi-based KMS co= mponents gpu-firmware-amd-kmod-banks-20220511 Firmware modules for banks AMD GPUs gpu-firmware-kmod-20220511,1=C2=A0=C2=A0 Firmware modules for the drm-kmod = drivers gpu-firmware-radeon-kmod-aruba-20220511 Firmware modules for aruba Radeon G= PUs FreeBSD STING 14.0-CURRENT FreeBSD 14.0-CURRENT #1 main-85d7875d42: Mon Jun= =C2=A0 6 13:40:11 CEST 2022=C2=A0=C2=A0=C2=A0=C2=A0 filippo@STING:/usr/obj/= usr/src/amd64.amd64/sys/STING amd64 ------=_Part_307284_556835552.1654603835291 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div class=3D"yahoo-style-wrap" style=3D"font-fami= ly:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:13px;"><div dir= =3D"ltr" data-setdir=3D"false">I have reinstalled CURRENT and I get an erro= r while trying to initialize radeon:it was working fine before reinstalling= CURRENT.<br></div><div dir=3D"ltr" data-setdir=3D"false"><br></div><div di= r=3D"ltr" data-setdir=3D"false"><span></span><div>[drm] radeon kernel modes= etting enabled. = &nb= sp; = &nb= sp; = <br>drmn0: <drmn> on vgapci0 &nbs= p; &= nbsp; &nbs= p; &= nbsp; &nbs= p; &= nbsp; &nbs= p; <br>vgapci0: child drmn0 requested pci_enable_io= &nb= sp; = &nb= sp; = <br>vgap= ci0: child drmn0 requested pci_enable_io  = ; &n= bsp;  = ; &n= bsp;  = ; <br>sysctl_warn_reuse: can't re-use a leaf = (hw.dri.debug)! = &nb= sp; = &nb= sp; <br>[drm] initializing kernel modesetting (REDWOOD 0x= 1002:0x68D8 0x1043:0x0356 0x00) &n= bsp;  = ; . = &nb= sp; = &nb= sp; = &nb= sp;  = ;<br>[drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MM= IO for ATO  = ; &n= bsp; M IIO  = ; &n= bsp;  = ; &n= bsp;  = ; &n= bsp;  = ; <br>ATOM BIOS: 68D8= .12.17.0.4.AS06.U122<br>drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003= FFFFFFF (1024M used)<br>drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007F= FFFFFF<br>[drm] Detected VRAM RAM=3D1024M, BAR=3D256M<br>[drm] RAM width 12= 8bits DDR<br>[TTM] Zone kernel: Available graphics memory: 8373714 Ki= B<br>[TTM] Zone dma32: Available graphics memory: 2097152 KiB<b= r>[TTM] Initializing pool allocator<br>[drm] radeon: 1024M of VRAM memory r= eady<br>[drm] radeon: 1024M of GTT memory ready.<br>[drm] Loading REDWOOD M= icrocode<br>drmn0: could not load firmware image 'radeon/REDWOOD_pfp.bin'<b= r>r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"<br>[drm ERROR := evergreen_init] Failed to load firmware!<br>drmn0: Fatal error during GPU i= nit<br>[drm] radeon: finishing device.<br>[TTM] Finalizing pool allocator<b= r>[TTM] Zone kernel: Used memory at exit: 0 KiB<br>[TTM] Zone &n= bsp; dma32: Used memory at exit: 0 KiB<br>[drm] radeon: ttm finalized<br>Wa= rning: can't remove non-dynamic nodes (dri)!<br>device_attach: drmn0 attach= returned 2<br><div>acpi_wmi0: <ACPI-WMI mapping> on acpi0</div><div>= <br></div></div><div dir=3D"ltr" data-setdir=3D"false">These are the ports = installed:</div><div dir=3D"ltr" data-setdir=3D"false"><div>drm-510-kmod-5.= 10.113_1 DRM drivers modules<br>d= rm-kmod-20220501  = ; Metaport of DRM modules for the linuxkpi-based KMS comp= onents<br>gpu-firmware-amd-kmod-banks-20220511 Firmware modules for banks A= MD GPUs<br>gpu-firmware-kmod-20220511,1 Firmware modules for th= e drm-kmod drivers<br>gpu-firmware-radeon-kmod-aruba-20220511 Firmware modu= les for aruba Radeon GPUs<br><br></div><div dir=3D"ltr" data-setdir=3D"fals= e"><span>FreeBSD STING 14.0-CURRENT FreeBSD 14.0-CURRENT #1 main-85d7875d42= : Mon Jun 6 13:40:11 CEST 2022 filippo@STING:= /usr/obj/usr/src/amd64.amd64/sys/STING amd64</span><br></div></div></div></= div></body></html> ------=_Part_307284_556835552.1654603835291--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1932797089.307285.1654603835293>