Date: Sat, 17 Jun 1995 14:43:00 -0700 From: "Justin T. Gibbs" <gibbs@freefall.cdrom.com> To: brian@mediacity.com (Brian Litzinger) Cc: freebsd-questions@freebsd.org Subject: Re: problems with WIDE drive Message-ID: <199506172143.OAA06205@freefall.cdrom.com> In-Reply-To: Your message of "Sat, 17 Jun 95 13:22:19 PDT." <m0sN4Nn-000re2C@easynet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
<problems with CONNER CP31050 1.05GB 160D deleted> I haven't had the oportunity to play with one of these devices before. Does it behave the same way if you disable wide negotiation, sync negotiation, or disconnection? Target Busy status can occur in many different situations... do these occur when you are doing transfers between two devices, or just I/O to/from the conner? > > FreeBSD 2.0-BUILT-19950601 > P5-90 > 16MB/512K Cache > 2940W (terminator off) > Wide chain > CONNER CP31050 1.05GB 160D (terminated) > Narrow chain > DEC RZ73 (C) DEC T392 > TEAC CD-ROM CD-50 1.06 (at end and terminated) > WANGTEK 6130-FS 3.04 > Digital DC21040 Ethernet > Matrox PCI VGA Your termination should be set High on, Low off on the 2940W for this configuration. >Lastly, I've tried two different Conners and both experince the same >problem. > >Thanks in advance for any help, > >Brian Litzinger >brian@easynet.com -- Justin T. Gibbs =========================================== Software Developer - Walnut Creek CDROM FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506172143.OAA06205>