Date: Mon, 2 Oct 1995 16:33:55 +0100 From: se@zpr.uni-koeln.de (Stefan Esser) To: Chris Madison <root@tippy.vnet.net> Cc: current@freebsd.org Subject: Re: SCSI and current Message-ID: <199510021533.AA04486@Sysiphos> In-Reply-To: Chris Madison <root@tippy.vnet.net> "SCSI and current" (Oct 1, 13:44)
next in thread | previous in thread | raw e-mail | index | archive | help
On Oct 1, 13:44, Chris Madison wrote: } Subject: SCSI and current } } I just built a kernel from current (src-cur.1031.gz) and it boots fine } until it gets to the scsi portion: } } FreeBSD 2.2-\M^?#0: Sun Oct 1 13:16:46 EDT 1995 } root@tippy.vnet.net:/usr/share/src/src/sys/compile/TIPPY } Probing for devices on the PCI bus: } chip0 <Intel 82437 (Triton)> rev 1 on pci0:0 } chip1 <Intel 82371 (Triton)> rev 2 on pci0:7 } vga0 <VGA-compatible display device> rev 0 int a irq 10 on pci0:17 } pci0:18: Adaptec, device=0x7178, class=storage (scsi) [no driver assigned] You seem to somehow have disabled the Adaptec 2940 driver (ahc0 ?) ... The vendor and device ID have been detected correctly, but no driver has shown any interest in dealing with that device :) } Death - automatic reboot time:'( } } But with a kernel built with the current from around this time: } } FreeBSD 2.2-CURRENT #0: Mon Sep 25 01:03:55 EDT 1995 } ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ } works fine: } } Probing for devices on the PCI bus: } chip0 <Intel 82437 (Triton)> rev 1 on pci0:0 } chip1 <Intel 82371 (Triton)> rev 2 on pci0:7 } vga0 <VGA-compatible display device> rev 0 int a irq 10 on pci0:17 } ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 11 on pci0:18 } Is this something bad or do I need to do something on my end?????? Please check your kernel config file, and rebuild your kernel for device ahc0 being defined and try again. Let me know, if this doesn't work. The default GUS interrupt vector has been changed to 11, according to some recent commit message. You may want to build a kernel without audio support, in case you have it configured in currently ... Regards, STefan -- Stefan Esser, Zentrum fuer Paralleles Rechnen Tel: +49 221 4706021 Universitaet zu Koeln, Weyertal 80, 50931 Koeln FAX: +49 221 4705160 ============================================================================== http://www.zpr.uni-koeln.de/staff/esser/esser.html <se@ZPR.Uni-Koeln.DE>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199510021533.AA04486>