Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 30 Jun 1996 03:16:33 -0400 (EDT)
From:      "Eric L. Hinson" <erich@ip.org>
To:        freebsd-questions@freebsd.org
Subject:   BitSurfr Pro --> Livingston 5-BRI at 128K?
Message-ID:  <199606300716.DAA01340@krypton.ip.org>

index | next in thread | raw e-mail

Hi,

I am trying to establish a ~128k connection from a FreeBSD-stable machine 
running user process ppp with a BitSurfr Pro to a BRI port on a Livingston 
PortMaster.  I have been successful at getting both 56k/async and 
64k/async connections, but have been unable to get both channels going 
at the same time.  My current connection allows my LAN at home to connect
to the ISP I maintain.

Has someone out there got this to work?  If so, could you please share 
with me how you accomplished this?  I would like to establish the
highest speed/performance link possible with my configuration, and greatly 
appreciate any and all help you can provide.  Thanks for your help.

Eric

My /etc/ppp.conf entries:
- - - - - - - - - - - - - 

default:
 set device /dev/cuaa1
 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER ABORT NO\\sDIALTONE TIMEOUT 5 \"\" AT OK-AT-OK ATE0 OK \\dATDT\\T TIMEOUT 10 CONNECT"

auglink:
 set phone 824xxxx
 set timeout 0
 set login "TIMEOUT 5 login:-\\r-login: admin-ppp word: my_password"
 set ifaddr 206.30.205.20 205.216.79.18 255.255.255.240
 add 0 255.255.255.240 205.216.79.18
 set debug phase chat lcp
 disable lqr
 dial

entry in the RADIUS /etc/raddb/users file looks like:
- - - - - - - - - - - - - - - - - - - - - - - - - - -
admin-ppp	Password = "my_password" 
		User-Service-Type = Framed-User,
		Framed-Protocol = PPP,
		Framed-Address = 206.30.205.20,
		Framed-Netmask = 255.255.255.240,
		Framed-Routing = None,
		Framed-MTU = 1500,
		Framed-Compression = None

BitSurfr Pro configuration:
- - - - - - - - - - - - - -
atii1i2i3

960

22BC

4574190-1F 3B3122BC PASS

OK

at&v
DATA PORT ACTIVE PROFILE:
E1 Q0 V1 W1 X2 &C1 &D2 &L0 &M0 &R1 &S0 &Y0 \Q3 
%A2=2 %A4=0 %A93=D %A94=D %A95=E %A96=0 %A97=E %A98=D  
@B0=2 @IS=D @N0=0 @N1=0 @P1=A  @P2=115200 @P3=N @P4=8 @P6=0 @G=D 
S00:001 S01:000 S02:043 S03:013 S04:010 S05:008 S07:030 S10:014 S12:050 S18:000
S25:005 S26:001 

DATA PORT STORED PROFILE 0:
E1 Q0 V1 W1 X2 &C1 &D2 &L  &M0 &R1 &S0 &Y  \Q3 
%A2=2 %A4=0 %A93=D %A94=D %A95=E %A96=0 %A97=E %A98=D  
@B0=2 @IS   @N0=0 @N1=0 @P1=A  @P2=115200 @P3=N @P4=8 @P6=0 @G   
S00:001 S01:000 S02:043 S03:013 S04:010 S05:008 S07:030 S10:014 S12:050 S18:000
S25:005 S26:001 

at>v=c
DATA PORT DN, SPID, AND TEI:
   ACTIVE    !N1=904823xxxx             !C6=904823xxxx0100         !D3=255 
   STORED    !N1=904823xxxx             !C6=904823xxxx0100         !D3=255 

POTS PORT 1 DN, SPID, AND TEI:
   ACTIVE   *!N1=904823yyyy            *!C6=904823yyyy0100        *!D3=255 
   STORED   *!N1=904823yyyy            *!C6=904823yyyy0100        *!D3=255 

POTS PORT 2 DN, SPID, AND TEI:
   ACTIVE  *2!N1=904823xxxx           *2!C6=904823xxxx0100       *2!D3=255 
   STORED  *2!N1=904823xxxx           *2!C6=904823xxxx0100       *2!D3=255 

at>v=g
SWITCH:
!C0=2 !C1=4 !C4=0 !C5=0 !C9=0 

FEATURE ACTIVATORS:
!V3=60 !V4=62 !V5=61 !V8=63 

OK

current session/port information from the PortMaster:
- - - - - - - - - - - - - - - - - - - - - - - - - - -
(my 64k link is currently up on s14.  I am trying to connect to both s14 
and s15).

arbol> sh all
S14  64000 on  ptp14            Netwrk ESTABLISHED      2147231    3347855    0
S15  64000 on                   Netwrk IDLE                   0         42    0

arbol> sh ses
Port User            Host/Inet/Dest   Type    Dir Status         Start   Idle
---- --------------- ---------------- ------- --- ------------- ------ ------
S14  sysadmin-ppp    krypton.ip.org   Netwrk  In  ESTABLISHED       11      0
S15  -               -                Netwrk  In  IDLE               0      0

arbol> sh s14
--------------------- Current Status - ISDN Port S14 ------------------------
        Status: ESTABLISHED
         Input: 2146583                   Abort Errors: 0
        Output: 3345231                     CRC Errors: 0
       Pending: 16                      Overrun Errors: 0
     TX Errors: 0                         Frame Errors: 0
  Modem Status: DCD+  CTS+  TELCO+  NT1+    Disconnect: Normal Clearing

                Active Configuration    Default Configuration
                --------------------    ---------------------
     Port Type: Netwrk                  Login/Netwrk (Dial In) (Security)
    Line Speed: 64000/async             64000

   Remote Host: krypton.ip.org          
       Netmask: 255.255.255.240         0.0.0.0
     Interface: ptp14 (PPP,Quiet,Compre (SLIP,Quiet)
           Mtu: 576                     576

          SPID: 904824xxxx0100
  Directory No: 904824xxxx
    Dial Group: 0
arbol> sh s15
--------------------- Current Status - ISDN Port S15 ------------------------
        Status: IDLE
         Input: 0                         Abort Errors: 0
        Output: 42                          CRC Errors: 0
       Pending: 0                       Overrun Errors: 0
     TX Errors: 0                         Frame Errors: 0
  Modem Status: DCD-  CTS+  TELCO+  NT1+    Disconnect: Normal Clearing

                Active Configuration    Default Configuration
                --------------------    ---------------------
     Port Type: Netwrk                  Netwrk (Dial In) (Security)
    Line Speed: 64000                   64000

     Interface: Unassigned (SLIP,Listen (SLIP,Quiet)
           Mtu: 0                       0
 Login Message: 

AugLink Communications, Inc.
Connected to Terminal Server #3 (arbol)

          SPID: 904824yyyy0100
  Directory No: 904824xxxx
    Dial Group: 0


routing tables on the machine dialing out on the BitSurfr Pro at 64k:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
krypton# netstat -rn
Routing tables

Internet:
Destination      Gateway            Flags     Refs     Use     Netif Expire
default          205.216.79.18      UGc         2        0      tun0
127.0.0.1        127.0.0.1          UH          1       11       lo0
205.216.79.18    206.30.205.20      UH          3      103      tun0
206.30.205.16    link#2             UC          1        0 
206.30.205.20    127.0.0.1          UGHS        1       10       lo0
224              link#2             UCS         0        0 

krypton# netstat -in
Name  Mtu   Network     Address            Ipkts Ierrs    Opkts Oerrs  Coll
fxp0* 1500  <Link>00.a0.c9.03.42.44            0     0        0     0     0
ed0   1500  <Link>00.00.c0.a6.96.8d           46     0       11     0     0
ed0   1500  206.30.205. 206.30.205.20         46     0       11     0     0
lp0*  1500  <Link>                             0     0        0     0     0
lo0   16384 <Link>                            21     0       21     0     0
lo0   16384 127         127.0.0.1             21     0       21     0     0
ppp0* 1500  <Link>                             0     0        0     0     0
sl0*  552   <Link>                             0     0        0     0     0
tun0  576   <Link>                          2909     0     3417     0     0
tun0  576   206.30.205. 206.30.205.20       2909     0     3417     0     0

ifconfig settings on machine with BitSurfr TA PPP 64k session running:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
krypton# ifconfig tun0
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 576
	inet 206.30.205.20 --> 205.216.79.18 netmask 0xfffffff0 

krypton# ifconfig ed0
ed0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	inet 206.30.205.20 netmask 0xfffffff0 broadcast 206.30.205.31
	ether 00:00:c0:a6:96:8d 

--
Eric L. Hinson   			      Unix Systems Administrator   
Personal E-Mail: erich@ip.org		   AugLink E-Mail: erich@aug.com
First City Free-Net			    AugLink Communications, Inc.
"The deer may forget the snare, but the snare does not forget the deer."


home | help

Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606300716.DAA01340>