Date: Thu, 22 Aug 1996 02:00:50 +0930 (CST) From: Peter Childs <pjchilds@imforei.apana.org.au> To: msmith@atrad.adelaide.edu.au, freebsd-hardware@freebsd.org Subject: Re: ASUS SC200 SCSI card? Message-ID: <199608211630.CAA29860@al.imforei.apana.org.au>
next in thread | raw e-mail | index | archive | help
In article <199608202352.JAA07430@genesis.atrad.adelaide.edu.au> you wrote: : Also, you might want to point out to the moron in the shop that PCI : interrupts are lettered (INTA, INTB, INTC, INTD), not numbered, and : that INTA on one slot is _NOT_ connected to INTA on any other slot. So this means that with multiple SC200 cards they can all be set on INTA ?? If so are there any pros/cons to doing this? I've got two in my machine, one driving a Fujitsu 230mb MO device under 2.1.5-stable, and just recently i've been having some disturbing hangs that feel like SCSI bus hangs whilst accessing the MO :( Could a mix match of SCSI-I and SCSI-II devices on the same bus cause this sort of problem? Basically i've got 2 1gb drives, a quantum fireball, and a segate 1080sl, along with a maxtor 330mb (ancient) on one bus, and the Fujitsu on the other.... The main reason for this at the moment is the Fujitsu's SCSI connector is upsidedown :( (and i hate cable twists/spagetti farms :) Regards, Peter -- Peter Childs --- http://www.imforei.apana.org.au/~pjchilds Finger pjchilds@al.imforei.apana.org.au for public PGP key
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199608211630.CAA29860>